1、BSI Standards PublicationBS EN 16711-2:2015T e x t i l e s D e t e r m i n a t i o n o fmetal contentPart 2: Determination of metals extractedby acidic artificial perspiration solutionBS EN 16711-2:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 16711-2:201
2、5.The UK participation in its preparation was entrusted to TechnicalCommittee TCI/80, Chemical testing of textiles.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract.
3、Users are responsible for its correctapplication. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 78748 5ICS 59.060.01Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority o
4、f theStandards Policy and Strategy Committee on 30 November 2015.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 16711-2:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 16711-2 November 2015 ICS 59.060.01 English Version Textiles - Determination of metal cont
5、ent - Part 2: Determination of metals extracted by acidic artificial perspiration solution Textiles - Dtermination de la teneur en mtaux - Partie 2: Dosage des mtaux extraits au moyen dune solution de sueur artificielle acide Textilien - Bestimmung von Metallen - Teil 2: Bestimmung von extrahierbare
6、n Metallen mit saurer synthetischer Schweilsung This European Standard was approved by CEN on 5 September 2015. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alt
7、eration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language ma
8、de by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Esto
9、nia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STAN
10、DARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16711-2:2015 EBS EN 16711-2:2015EN 1671
11、1-2:2015 (E) 2 Contents Page European foreword . 3 1 Scope 4 2 Normative references 4 3 Principle . 4 4 Apparatus . 4 5 Reagents . 5 6 Test specimen sampling . 5 7 Procedure. 6 7.1 Extraction . 6 7.2 Determination of metals . 6 7.3 Reporting of results 6 8 Reliability of the method 6 9 Test report .
12、 7 Annex A (informative) Reliability of the method 8 A.1 Trueness complying with ISO 5725-4 8 A.2 System precision . 9 A.3 Limit of detection and limit of quantification . 9 Annex B (informative) Extraction recovery. 10 Bibliography . 11 BS EN 16711-2:2015EN 16711-2:2015 (E) 3 European foreword This
13、 document (EN 16711-2:2015) has been prepared by Technical Committee CEN/TC 248 “Textiles and textile products”, the secretariat of which is held by BSI. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the late
14、st by May 2016, and conflicting national standards shall be withdrawn at the latest by May 2016. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such pate
15、nt rights. EN 16711, Textiles Determination of metal content is composed of the following parts: Part 1: Determination of metals using microwave digestion; Part 2: Determination of metals extracted by acidic artificial perspiration solution. According to the CEN/CENELEC Internal Regulations, the nat
16、ional standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Li
17、thuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 16711-2:2015EN 16711-2:2015 (E) 4 1 Scope This European Standard specifies a procedure for determination of antimony (Sb), arsenic (As), ca
18、dmium (Cd), chromium (Cr), cobalt (Co), copper (Cu), lead (Pb), mercury (Hg), nickel (Ni) in natural and man-made textiles, including coated fabrics and garment components (e.g. buttons, zips, etc.) after extraction with acidic artificial perspiration solution. 2 Normative references The following d
19、ocuments, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 1233, Water quality
20、 Determination of chromium Atomic absorption spectrometric methods EN ISO 105-E04, Textiles Tests for colour fastness Part E04: Colour fastness to perspiration (ISO 105-E04) EN ISO 3071, Textiles Determination of pH of aqueous extract (ISO 3071) EN ISO 3696, Water for analytical laboratory use Speci
21、fication and test methods (ISO 3696) EN ISO 11885, Water quality Determination of selected elements by inductively coupled plasma optical emission spectrometry (ICP-OES) (ISO 11885) EN ISO 12846, Water quality Determination of mercury Method using atomic absorption spectrometry (AAS) with and withou
22、t enrichment (ISO 12846) EN ISO 15586, Water quality Determination of trace elements using atomic absorption spectrometry with graphite furnace (ISO 15586) EN ISO 17294-2, Water quality Application of inductively coupled plasma mass spectrometry (ICP-MS) Part 2: Determination of 62 elements (ISO 172
23、94-2) EN ISO 17852, Water quality Determination of mercury Method using atomic fluorescence spectrometry (ISO 17852) ISO 8288, Water quality Determination of cobalt, nickel, copper, zinc, cadmium and lead Flame atomic absorption spectrometric methods 3 Principle For determination of soluble metals,
24、the textile specimen is cut into small pieces and is extracted with acidic artificial perspiration solution. Analysis is performed with appropriate analytical techniques of atomic absorption and mass spectrometry (e.g. ICP-MS, ICP-OES, AAS, cold vapour atomic absorption spectrometry, etc.). 4 Appara
25、tus General laboratory equipment for analytical chemistry. In addition, the following is required: 4.1 Analytical balance, readability 0,000 1 g. BS EN 16711-2:2015EN 16711-2:2015 (E) 5 4.2 Erlenmeyer flask (100 ml) with stopper or other appropriate closable vessel. 4.3 pH meter with glass electrode
26、 according to EN ISO 3071. 4.4 Shaker, optional horizontal or circular shaker. 4.5 Heating source (37 2) C, e.g. water bath. 4.6 Filter, pore size of 0,45 m. 5 Reagents Unless otherwise specified, analytical grade chemicals shall be used. 5.1 Perspiration solution complying with EN ISO 105-E04. Diss
27、olve with water (5.4) in a 1 000 ml flask: 0,5 g L-histidine-monohydrochloride-1-hydrate; 5,0 g sodium chloride; 2,2 g sodium dihydrogenphosphate-2-hydrate. Adjust the solution with diluted sodium hydroxide (5.3) or diluted hydrochloric acid (5.2) to pH (5,5 0,2). Verify the compliance of the pH val
28、ue using a pH electrode. Subsequently fill up with water (5.4) to the mark and homogenize the solution. 5.2 Hydrochloric acid, c(HCl) = 1 mol/l. 5.3 Sodium hydroxide, c(NaOH) = 1 mol/l. 5.4 Grade 2 water, complying with EN ISO 3696. 5.5 Metal standard solutions for calibration of the analytical syst
29、ems complying with EN 1233, EN ISO 11885, EN ISO 12846, EN ISO 15586, EN ISO 17294-2, EN ISO 17852 or ISO 8288. 5.6 Nitric acid, (HNO3) = 65 %. 5.7 Dilution solution, 1,2 ml nitric acid (5.6) is diluted with water (5.4) to 100 ml. 6 Test specimen sampling Cut from the specimen, with a sharp pair of
30、scissors made of noncorrosive material (preferably of ceramics) a representative sub-sample of approximately 1 g and record the mass to the nearest 0,1 mg. If the textile article is composed of several parts of products, such as knitted cuffs or lining, all kinds of materials have to be tested as a
31、representative composite sample with equal parts of the materials. Select the number of parts that can be collected as a composite sample, in correlation with the detection and quantification limits of the instrumental equipment. Weigh out materials, which cannot be separated, as a composite sample.
32、 Consider also different colours of the material for sampling. Avoid any contact with metal articles, especially in wet conditions or with corrosive surfaces. BS EN 16711-2:2015EN 16711-2:2015 (E) 6 7 Procedure 7.1 Extraction If there is sufficient test material duplicate determinations shall be car
33、ried out. Approximately 1 g of the specimen is cut into small pieces (about 1 cm2) and the mass recorded to the nearest 0,1 mg), in order to ensure sufficient wetting, and is transferred into a Erlenmeyer flask or other contamination free vessels. For any materials except felt and wool use 100 ml ve
34、ssels. In the case of felt and wool use 250 ml vessels. Add 50 ml of acid synthetic perspiration solution (5.1) to the test specimen and stopper. The specimen is shaken briefly by hand in order to ensure a complete wetting of the textile sample. Subsequently, the specimen is shaken for 1 h at (37 2)
35、 C. The shaking frequency is adjusted to 60 cycles per minute in case of a horizontal shaker and to 30 cycles per minute using a circular shaker. Alternatively, stirring with a magnetic stirrer is allowed. Subsequently, filter (4.6) the extract in order to remove small textile particles and fluff. 7
36、.2 Determination of metals Determination of the metal amounts in the digestion solutions is performed complying with EN 1233, EN ISO 11885, EN ISO 12846, EN ISO 15586, EN ISO 17294-2, EN ISO 17852 or ISO 8288. Calibration is performed either with calibration solutions in the appropriate matrix or vi
37、a standard addition. In the case of excessive concentrations, the test solutions may be diluted with dilution solution (5.7) depending on the analytical system. 7.3 Reporting of results The metal contents in the textile have to be specified in milligram per kilogram (mg/kg). The results of 7.2 are c
38、alculated according to the following equation: )1000()(=mVd where d metal content as mass portion, in milligrams per kilogram (mg/kg); mass concentration of metal in the extraction solution, in micrograms per litre (g/l); V volume of solvent, in millilitres (ml); m weight of specimen, in grams (g).
39、If a dilution has been applied for testing, the dilution factor has to be taken into account for the determination of the result. 8 Reliability of the method The results of the round robin test can be found in Annex A. NOTE “Trueness” and “precision” are terms complying with ISO 5725-1 to describe t
40、he accuracy of test methods. BS EN 16711-2:2015EN 16711-2:2015 (E) 7 9 Test report The test report shall state at least the following particulars: a) name of the laboratory; b) reference to this European Standard; c) specification of the applied analytical system; d) specification of the specimen; e
41、) amount of each targeted metal in mg/kg; f) any discrepancy from this European Standard, if relevant. BS EN 16711-2:2015EN 16711-2:2015 (E) 8 Annex A (informative) Reliability of the method A.1 Trueness complying with ISO 5725-4 “Trueness” refers to the closeness of agreement between the arithmetic
42、 mean of a large number of test results and the true or accepted reference value. Trueness was calculated as systematic measurement error (bias) of the method and in correlation to the mean value, because no reference value of the investigated material is available. In a round robin test 2006 of NMP
43、 a textile specimen was tested for metal content using different test methods. The measured values of the participating laboratories deviated partly from each other. For result evaluation particular laboratory values (“outliers”) were eliminated resulting in good correlation based on the calculation
44、 of standard deviation. Calculation of mean value and standard deviation after elimination of deviating values (marked in grey) for the determination of metals after extraction with acid synthetic perspiration solution. Table A.1 Results of statistical evaluation: Determination of contents after ext
45、raction with perspiration solution Metal Metal content mg/kg Mean value x mg/kg Standard deviation s mg/kg Variation coefficient v % Laboratory A B C D E F G H Sb 4,59 6,50 6,27 6,77 5,54 7,80 4,30 5,11 5,86 1,189 20 As 0,60 10 0,46 0,42 0,53 0,45 0,73 0,59 0,54 0,109 20 Pb 0,48 0,30 0,89 0,48 0,44
46、0,48 0,59 0,96 0,58 0,230 40 Cd 0,07 0,20 0,16 0,20 0,17 0,17 0,17 0,20 0,18 0,018 10 Cr 2,90 2,00 2,94 2,31 2,39 2,91 2,90 3,14 2,69 0,399 15 Co 0,98 1,00 1,14 1,12 1,29 1,29 1,30 1,38 1,19 0,149 13 Cu 6,05 8,10 7,87 9,01 8,72 9,77 10,10 10,00 8,70 1,360 16 Ni 3,56 5,40 6,63 5,41 5,51 6,59 5,90 6,6
47、9 6,02 0,602 10 Hg 0,07 0,14 0,06 0,07 0,02 0,03 0,10 0,11 0,09 0,028 31 BS EN 16711-2:2015EN 16711-2:2015 (E) 9 Table A.2 Estimation of method trueness: calculation of the systematic deviation (bias) of the measurement method complying with ISO 5725-4 Metal Systematic deviation (bias) Laboratory A
48、B C D E F G H Sb 1,27 0,64 0,41 0,91 0,32 1,94 1,56 0,75 As 0,06 0,08 0,12 0,01 0,09 0,19 0,05 Pb 0,10 0,28 0,31 0,10 0,14 0,10 0,01 0,38 Cd 0,11 0,02 0,02 0,02 0,01 0,01 0,01 0,02 Cr 0,21 0,69 0,25 0,38 0,30 0,22 0,21 0,45 Co 0,21 0,19 0,05 0,07 0,10 0,10 0,11 0,19 Cu 2,65 0,60 0,83 0,31 0,02 1,07
49、1,40 1,30 Ni 2,46 0,62 0,61 0,61 0,51 0,57 0,12 0,67 Hg 0,02 0,05 0,03 0,02 0,07 0,06 0,01 0,02 Table A.3 Calculation of the percental recovery rate (extraction yield) for perspiration extraction in reliance to total digestion Metal Percental recovery rate (extraction yield) % Mean value x % Standard deviation s % Laboratory A B C D E F G H Sb 40,87 57,88 55,83 60,28 49,33 69,46 38,29 45,50 52,18 9,90 As 96,77 74,19 67,74 85,48 72,58 117,74 95,16 87,10 16,27 Pb 33,3
