1、BSI Standards PublicationHousehold and similar electrical appliances SafetyPart 2-2: Particular requirements for vacuum cleaners and water-suction cleaning appliancesBS EN 60335-2-2:2010+A1:2013BS EN 60335-2-2:2010+A1:2013National forewordThis British Standard is the UK implementation of EN 60335-2-
2、2:2010+A1:2013. It is derived from IEC 60335-2-2:2009, incorporating amendment 1:2012. It supersedes BS EN 60335-2-2:2010+A11:2012, which will be withdrawn on 20 December 2015.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to
3、 IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by !“.Where a common modification has been introduced by amendment, the tags carry the number of the amendment. For example, the common modifications introduced by CENELEC amendment A11 are ind
4、icated by hi.The UK participation in its preparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/1, Motorised appliance group. A list of organizations represented on this subcommittee can be obtained on request to its sec
5、retary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2013. Published by BSI Standards Limited 2013ISBN 978 0 580 77915 2ICS 97.080Compliance with a British Standard cannot
6、confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 May 2010.Amendments/corrigenda issued since publicationDate Text affected30 November 2012 Implementation of CENELEC amendment A11:201231 July 2013 Imple
7、mntaion fIEC amendment 1:2012 with CENELEC endorsement A1:2013BRITISH STANDARDEUROPEAN STANDARD EN 60335-2-2:2010NORME EUROPENNE EUROPISCHE NORM CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische No
8、rmung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60335-2-2:2010 E ICS 13.120; 97.080English version Household and similar electrical appliances - Safety - Part 2-2
9、: Particular requirements for vacuum cleaners and water-suction cleaning appliances (IEC 60335-2-2:2009) Appareils lectrodomestiques et analogues - Scurit - Partie 2-2: Rgles particulires pour les aspirateurs et les appareils de nettoyage aspiration deau (CEI 60335-2-2:2009) Sicherheit elektrischer
10、Gerte fr den Hausgebrauch und hnliche Zwecke - Teil 2-2: Besondere Anforderungen fr Staubsauger und Wassersauger (IEC 60335-2-2:2009) This European Standard was approved by CENELEC on 2010-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condit
11、ions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in thr
12、ee official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnic
13、al committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzer
14、land and the United Kingdom. +A1March 2013Foreword The text of document 61/3871/FDIS, future edition 6 of IEC 60335-2-2, prepared by IEC TC 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60335-2-2 on 2010-02
15、-01. This European Standard supersedes EN 60335-2-2:2003 + A1:2004 + A2:2006. The principal change in EN 60335-2-2:2010 as compared with EN 60335-2-2:2003 is as follows (minor changes are not listed): the text is aligned with EN 60335-1:2002, and its amendments A1:2004 and A2:2006 (see text marked w
16、ith a marginal bar). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to b
17、e implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-11-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2015-02-01 This Part 2 has to be used in conjunction with EN 60335-1, Household and simil
18、ar electrical appliances Safety Part 1: General requirements. It was established on the basis of the 2002 edition of that standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revi
19、sion of Part 1. This Part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert it into the European Standard: Safety requirements for vacuum cleaners and water-suction cleaning appliances. When a particular subclause of Part 1 is not mentioned in this Part 2, that subc
20、lause applies as far as is reasonable. When this standard states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. NOTE 1 The following numbering system is used: subclauses, tables and figures that are numbered starting from 101 are additional to
21、those in Part 1; unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause; additional annexes are lettered AA, BB, etc.; subclauses, notes and annexes that are additional to those in the IEC standard are pr
22、efixed with the letter Z. NOTE 2 The following print types are used: requirements: in roman type; test specifications: in italic type; notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are als
23、o in bold. There are no special national conditions causing a deviation from this European Standard, other than those listed in Annex ZA to EN 60335-1. There are no national deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1. p NOTE In this document, p is used
24、in the margin to indicate instructions for preparing the printed version. BS EN 60335-2-2:2010+A1:2013 EN 60335-2-2:2010+A1:2013 (E) 2 _ Introduction p Add: An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered by the Low Voltage
25、 Directive, 2006/95/EC. For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 2006/42/EC, has shown that the risks are mainly of electrical origin and consequently this directive is not applicable. However, the relevant essential safety requiremen
26、ts of the Machinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directive. _ Endorsement notice The text of the International Standard IEC 60335-2-2:2009 was approved by CENELEC as a European Standard without any modification. _ Bibliography p Add
27、 the following notes to the standards mentioned: IEC 60335-2-69 NOTE Harmonized as EN 60335-2-69. ISO 13732-1 NOTE Harmonized as EN ISO 13732-1. _ This document (EN 60335-2-2:2010/A11:2012) has been prepared by CLC/TC 61 “Safety of household and similar electrical appliances“. The following dates ar
28、e fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-07-09 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2015-02-01 Attention is drawn
29、to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This amendment supplements or modifies the corresponding clauses of EN 60335-1:2012 and EN 60335-2-2:2010
30、. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Foreword to amendment A11BS EN 60335-2-2:2010+A1:2013 EN 60335-2-2:2010+A1:2013 (E) 3 BS EN 60335-2-2:2010+A1:2013 EN 60335-2-2:2010+A1:2
31、013 (E)Foreword to amendment A1 The text of document 61/4446/FDIS, future amendment 1 to edition 6 of IEC 60335-2-2, prepared by IEC/TC 61 “Safety of household and similar electrical appliances“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60335-2-2:2010/A1:2013. The
32、following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2013-09-22 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-12-20 Att
33、ention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equip
34、ment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 60335-2-2:2009/A1:2012 was approved by CENELEC as a European Standard without any modification. 4 BS EN 60335-2-2:2010+A1:2013 EN 60335-2-2:2010+A1:2013 (E)p Add: Ann
35、ex ZC (normative) Normative references to international publications with their corresponding European publications Addition: Publication Year Title EN/HD Year IEC 60312 - Vacuum cleaners for household use - Methods of measuring the performance EN 60312 - ISO 6344-2 - Coated abrasives - Grain size a
36、nalysis - Part 2: Determination of grain size distribution of macrogrits P12 to P220 - - 5 CONTENTS INTRODUCTION.8 1 Scope.9 2 Normative references .10 3 .10 4 General requirement.11 5 General conditions for the tests 11 6 Classification12 7 Marking and instructions.12 8 Protection against access to
37、 live parts14 9 Starting of motor-operated appliances 14 10 Power input and current .14 11 Heating 14 12 Void15 13 Leakage current and electric strength at operating temperature15 14 Transient overvoltages .15 15 Moisture resistance 1516 Leakage current and electric strength.17 17 Overload protectio
38、n of transformers and associated circuits .17 18 Endurance17 19 Abnormal operation 17 20 Stability and mechanical hazards .18 21 Mechanical strength .19 22 Construction.21 23 Internal wiring.22 24 Components .22 25 Supply connection and external flexible cords 22 26 Terminals for external conductors
39、.23 27 Provision for earthing .23 28 Screws and connections.23 29 Clearances, creepage distances and solid insulation 23 30 Resistance to heat and fire.23 31 Resistance to rusting23 32 Radiation, toxicity and similar hazards23 Annexes .27 Annex B (normative) Appliances powered by rechargeable batter
40、ies27 Annex C (normative) Ageing test on motors .29 Bibliography30 Figure 101 Apparatus for testing the abrasion resistance of current-carrying hoses .24 Figure 102 Apparatus for testing the resistance to flexing of current-carrying hoses 25 Terms and definitions! “! “Annex R (normative) Software ev
41、aluation 30BS EN 60335-2-2:2010+A1:2013 IEC 60335-2-2:2010+A1:2012 (E) 6 Figure 103 Configuration of the hose for the freezing treatment .26 Figure 104 Flexing positions for the hose after removal from the freezing cabinet2 6BS EN 60335-2-2:2010+A1:2013 IEC 60335-2-2:2010+A1:2012 (E) 7 INTRODUCTION
42、It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, thermal,
43、fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances. This
44、standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also incorporates functi
45、ons that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. When a part 2 standard does not include additional requirements to cover hazards
46、dealt with in part 1, part 1 applies. NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in question over and above the general requirements. This standard is a product fam
47、ily standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into consideration when developing the general and particul
48、ar requirements for the IEC 60335 series of standards. For example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addition to part 1 or part 2 standards. An appliance that complies with the text
49、 of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements. An appliance employing materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially eq
