1、Fixed capacitors for use in electronic equipmentPart 14-2: Blank detail specification Fixed capacitors for electromagnetic interference suppression and connection to the supply mains Safety tests onlyBS EN 60384-14-2:2016BSI Standards PublicationNational forewordThis British Standard is the UK imple
2、mentation of EN 60384-14-2:2016. It isidentical to IEC 60384-14-2:2016. It supersedes BS EN 60384-14-2:2004which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/40X, Capacitors and resistors for electronic equipment.A list of organizations represented on
3、this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 86403 2ICS
4、 31.060.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 June 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60384-
5、14-2:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60384-14-2 May 2016 ICS 31.060.10 Supersedes EN 60384-14-2:2004English Version Fixed capacitors for use in electronic equipment - Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and co
6、nnection to the supply mains - Safety tests only (IEC 60384-14-2:2016) Condensateurs fixes utiliss dans les quipements lectroniques - Partie 14-2: Spcification particulire cadre - Condensateurs fixes dantiparasitage et raccordement lalimentation - Essais de scurit uniquement (IEC 60384-14-2:2016) Fe
7、stkondensatoren zur Verwendung in Gerten der Elektronik - Teil 14-2: Vordruck fr Bauartspezifikation - Kondensatoren zur Unterdrckung elektromagnetischer Strungen, geeignet fr Netzbetrieb - Nur Sicherheitsprfungen (IEC 60384-14-2:2016) This European Standard was approved by CENELEC on 2016-05-12. CE
8、NELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on
9、 application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the C
10、EN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hunga
11、ry, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechniqu
12、e Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60384-14-2:2016 EBS EN 60384-14-2:2016EN 60384-14-2:2016 2 Euro
13、pean foreword The text of document 40/2446/FDIS, future edition 2 of IEC 60384-14-2, prepared by IEC/TC 40 “Capacitors and resistors for electronic equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60384-14-2:2016. The following dates are fixed: g120 latest date
14、 by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-02-12 g120 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-05-12 This document supersedes EN 60384-14
15、-2:2004. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60384-14-2:2016
16、 was approved by CENELEC as a European Standard without any modification. BS EN 60384-14-2:2016EN 60384-14-2:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively ref
17、erenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common mod
18、ifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60384-1 2016 Fixed capacitors for use in electronic equipment - Par
19、t 1: Generic specification EN 60384-1 2016 IEC 60384-14 2013 Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains EN 60384-14 2013 IEC 60384-14-1 - Fixed capacitors for u
20、se in electronic equipment - Part 14-1: Blank detail specification: Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level DZ EN 60384-14-1 - IEC 61193-2 2007 Quality assessment systems - Part 2: Selection and use of sampling plans for ins
21、pection of electronic components and packages EN 61193-2 2007 BS EN 60384-14-2:2016 2 IEC 60384-14-2:2016 g164 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 0 Blank detail specification . 5 0.1 General . 5 0.2 Identification of the detail specification 5 0.3 Identification of the capacitor . 5 1 G
22、eneral data . 7 1.1 Recommended method(s) of mounting (to be inserted) . 7 1.2 Dimensions . 7 1.3 Ratings and characteristics . 7 1.4 Normative references 7 1.5 Marking . 8 1.6 Ordering information . 8 1.7 Additional information (not required for inspection purposes) 8 1.8 Additional or increased se
23、verities or requirements to those specified in the generic and/or sectional specification 8 2 Inspection requirements . 8 2.1 Procedures . 8 2.2 Test schedules 8 2.2.1 Initial approval . 8 2.2.2 Requalification . 8 Annex A (normative) Declaration of design . 12 Table 1 Other characteristics 8 Table
24、2 Initial approval test schedule for safety tests only (1 of 2) . 9 Table 3 Conformance test schedule: lot-by-lot 11 BS EN 60384-14-2:2016IEC 60384-14-2:2016 g164 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 14-2: Blank detail specifica
25、tion Fixed capacitors for electromagnetic interference suppression and connection to the supply mains Safety tests only FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Co
26、mmittees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Ava
27、ilable Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental o
28、rganizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technic
29、al matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC
30、National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformi
31、ty, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC
32、 itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure t
33、hat they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any n
34、ature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referen
35、ced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. Internat
36、ional Standard IEC 60384-14-2 has been prepared by IEC technical committee 40: Capacitors and resistors for electronic equipment. This second edition cancels and replaces the first edition published in 2004 and constitutes a technical revision. This edition includes the following significant technic
37、al changes with respect to the previous edition: The permitted number of non-conforming items in Table 2 is always zero following the sectional specification IEC 60384-14:2013. BS EN 60384-14-2:2016 4 IEC 60384-14-2:2016 g164 IEC 2016 The text of this standard is based on the following documents: FD
38、IS Report on voting 40/2446/FDIS 40/2459/RVDFull information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. A list of all parts in the IEC 60384 series, published under the general title Fixed capacitors for use in electronic equipm
39、ent, can be found on the IEC website. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This International Standard is to be used in conjunction with IEC 60384-1:2016. The committee has decided that the contents of this publication will remain unchanged until the s
40、tability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be g120 reconfirmed, g120 withdrawn, g120 replaced by a revised edition, or g120 amended. BS EN 60384-14-2:2016IEC 60384-14-2:2016 g164 IEC 201
41、6 5 INTRODUCTION 0 Blank detail specification 0.1 General This blank detail specification forms the basis for a uniform procedure for a common International Safety Mark. It implements the approval schedule for safety tests in IEC 60384-14:2013, 1.4.2, requires a declaration of design for parameters
42、relevant to safety and indicates conformance tests to be conducted on every lot prior to its release and requalification tests depending on changes to the declared design. In comparison with IEC 60384-14-1 which provides quality conformance and safety tests, this specification is restricted to safet
43、y tests only. The use of IEC 60384-14-1 may be more appropriate for components manufactured in mass production, whereas the employment of this specification may be necessary in those cases where approval and requalification tests contribute considerably to the costs of the product. A blank detail sp
44、ecification is a supplementary document to the sectional specification and contains requirements for style, layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications, nor shoul
45、d they so be described. In the preparation of detail specifications the content of 1.4 of the sectional specification should be taken into account. 0.2 Identification of the detail specification The first page of the detail specification should have the layout recommended on the next page of this bl
46、ank detail specification. The numbers between square brackets correspond to the following information which should be inserted at the position indicated: 1 The “International Electrotechnical Commission“ or the National Standards Organization under whose authority the detail specification is drafted
47、. 2 The IEC or National Standards number of the detail specification, date of issue and any further information required by the national system. 3 The number and issue number of the IEC, or national, generic, or sectional specification, as relevant. 4 If different from the IEC number, the national n
48、umber of the detail specification, date of issue and any further information required by the national system, together with any amendment numbers. 0.3 Identification of the capacitor 5 A short description of the type of capacitor or range of capacitors. The text should be suitable for an entry in th
49、e IECQ Register of approvals. 6 Information on typical construction (when applicable). The text should be suitable for an entry in the IECQ Register of approvals. 7 Outline drawing with main dimensions which are of importance for interchangeability and/or reference to the appropriate national or international documents for outlines. Alternatively, the drawing may be given in an annex to the detail specification, but 7 should always contain an illustration of the general outer appearance of the
