1、BRITISH STANDARDBS EN 60384-17-1:2005Fixed capacitors for use in electronic equipment Part 17-1: Blank detail specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors Assessment levels E and EZ The European Standard EN 60384-17-1:2005 has the status of a British Standa
2、rdICS 31.060.30g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 60384-17-1:2005This British Standard was published under the authority of the S
3、tandards Policy and Strategy Committee on 2 February 2006 BSI 2 February 2006ISBN 0 580 47746 0National forewordThis British Standard is the official English language version of EN 60384-17-1:2005. It is identical with IEC 60384-17-1:2005. It supersedes BS QC 301301:1990 which will be withdrawn on 1
4、 November 2008.The UK participation in its preparation was entrusted to Technical Committee EPL/40X, Capacitors and resistors for electronic equipment, which has the responsibility to: A list of organizations represented on this committee can be obtained on request to its secretary.Cross-referencesT
5、he British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “International Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standa
6、rds Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. aid enquirers to understand the text; present to the re
7、sponsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in the UK.Summary of pagesThis document comprises a front cover, an inside front cover,
8、 the EN title page, pages 2 to 15 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD EN 60384-17-1 NORME EUROPENNE EUROPISCHE NORM December 2005 CENELEC European C
9、ommittee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENE
10、LEC members. Ref. No. EN 60384-17-1:2005 E ICS 31.060.30 English version Fixed capacitors for use in electronic equipment Part 17-1: Blank detail specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors - Assessment levels E and EZ (IEC 60384-17-1:2005) Condensateurs f
11、ixes utiliss dans les quipements lectroniques Partie 17-1: Spcification particulire cadre: Condensateurs fixes pour tension alternative et pour impulsions dilectrique en film de polypropylne mtallis Niveaux dassurances E et EZ (CEI 60384-17-1:2005) Festkondensatoren zur Verwendung in Gerten der Elek
12、tronik Teil 17-1: Vordruck fr Bauartspezifikation: Festkondensatoren mit metallisierter Polypropylen-Folie als Dielektrikum fr Wechselspannungs- und Impulsbetrieb - Qualittsbewertungsstufen E und EZ (IEC 60384-17-1:2005) This European Standard was approved by CENELEC on 2005-11-01. CENELEC members a
13、re bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to
14、 the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has th
15、e same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, P
16、ortugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. Foreword The text of document 40/1598/FDIS, future edition 2 of IEC 60384-17-1, prepared by IEC TC 40, Capacitors and resistors for electronic equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CEN
17、ELEC as EN 60384-17-1 on 2005-11-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2006-08-01 latest date by which the national standards conflicting with the EN have to be
18、withdrawn (dow) 2008-11-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60384-17-1:2005 was approved by CENELEC as a European Standard without any modification. _ EN 60384-17-1:2005 2 3 EN 60384-17-1:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC E
19、QUIPMENT Part 17-1: Blank detail specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors Assessment levels E and EZ INTRODUCTION Blank detail specification A blank detail specification is a supplementary document to the sectional specification and contains requirement
20、s for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they be so described. In the preparation of detail specifications the content of 1.4 of the
21、sectional specification shall be taken into account. The numbers between brackets on the first page correspond to the following information which shall be inserted in the position indicated: Identification of the detail specification 1 The “International Electrotechnical Commission“ or the National
22、Standards Organization under whose authority the detail specification is drafted. 2 The IEC or National Standards number of the detail specification, date of issue and any further information required by the national system. 3 The number and issue number of the IEC or national generic specification.
23、 4 The IEC number of the blank detail specification. Identification of the capacitor 5 A short description of the type of capacitor. 6 Information on typical construction (when applicable). NOTE When the capacitor is not designed for use in printed board applications, this must be clearly stated in
24、the detail specification in this position. 7 Outline drawing with main dimensions which are of importance for interchangeability and/or reference to the national or international documents for outlines. Alternatively, this drawing may be given in an appendix to the detail specification. 8 Applicatio
25、n or group of applications covered and/or assessment level. NOTE The assessment level(s) to be used in a detail specification must be selected from the sectional specification, 3.5.4. This implies that one blank detail specification may be used in combination with several assessment levels provided
26、the grouping of the tests does not change. 9 Reference data on the most important properties, to allow comparison between the various capacitor types. EN 60384-17-1:2005 4 1 IEC 60384-17-1-XXX QC XXXXXXXXXXX 2 IEC 60384-17-1 QC XXXXXX 4 ELECTRONIC COMPONENTS OF ASSESSED QUALITY IN ACCORDANCE WITH: 3
27、 FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC AC AND PULSE CAPACITORS5 6 Outline drawing (see Table 1) (first angle projection) 7 (Other shapes are permitted within the dimensions given) Assessment levels E and EZ 8 Performance grade: Stability grade: NOTE For 1 to 9: see previous page. Informatio
28、n on the availability of components qualified to this detail specification is given in IEC QC 001005 9 1 General data 1.1 Recommended method(s) of mounting (to be inserted) See IEC 60384-17, 1.4.2. 1.2 Dimensions Table 1 Case size reference and dimensions Dimensions Case size reference L H d . . . .
29、 . . . When there is no case size reference, Table 1 may be omitted and the dimensions shall be given in Table 2, which then becomes Table 1. The dimensions shall be given as maximum dimensions or as nominal dimensions with a tolerance. 5 EN 60384-17-1:2005 1.3 Ratings and characteristics Capacitanc
30、e range (see Table 2) Tolerance on rated capacitance Rated voltage (see Table 2) rated d.c. voltage (if applicable) rated a.c. voltage (and frequency if different from 50/60 Hz) Category voltage (if applicable) (see Table 2) Climatic category AC rated temperature Tangent of loss angle (frequency .)
31、(see Table 2) Insulation resistance (see Table 2) Rated peak current or rated voltage pulse slope R)d()d(tU(if applicable) Sinusoidal rated a.c. current (at reference frequency .) and derating curve versus temperature (if applicable) Reference frequency (if applicable) Table 2 Values of capacitance,
32、 a.c. voltage and peak current (or voltage pulse slope), related to case sizes Rated a.c. voltage (UR) Category voltage1) (UC) Rated capacitance (in nF or F) Peak current or dU/dt Rated capacitance (in nF or F) Peak current or dU/dt Case size reference 1)If different from the rated voltage. Table 2a
33、 (if applicable) Rated a.c. current related to rated a.c. voltage and rated capacitance and case sizes Rated a.c. voltage (UR) Rated a.c. current Rated capacitance (in nF and/or F) Case size Rated capacitance (in nF and/or F) Case size NOTE Other presentations are possible. EN 60384-17-1:2005 6 Perm
34、itted effective current characteristics (if applicable) Rated current (%) 100 Temperature (C)Table 3 Particular characteristics 1.4 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. Fo
35、r undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60384-1, Fixed capacitors for use in electronic equipment Part 1: Generic specification IEC 60384-17, Fixed capacitors for use in electronic equipment Part 17: Sectional specification: Fixed m
36、etallized polypropylene film dielectric a.c. and pulse capacitors 1.5 Marking The marking of the capacitor and the packing shall be in accordance with the requirements of IEC 60384-17, 1.6. NOTE The details of the marking of the component and packing must be given in full in the detail specification
37、. 1.6 Ordering information Orders for capacitors covered by this specification shall contain, in clear or in coded form, the following minimum information: a) rated capacitance; b) tolerance on rated capacitance; c) rated a.c. voltage, and frequency if different from 50/60 Hz (if applicable); d) rat
38、ed voltage, pulse slope or peak current (if applicable); e) rated a.c. current and corresponding frequency (if applicable); f) number and issue reference of the detail specification and style reference; g) performance and stability grade (if required). 7 EN 60384-17-1:2005 1.7 Certified records of r
39、eleased lots Required/not required. 1.8 Additional information (not for inspection purposes) 1.9 Additional or increased severities or requirements to those specified in the generic and/or sectional specification NOTE Additions or increased requirements should be specified only when essential. Table
40、 3 Other characteristics This table is to be used for defining characteristics which are additional to or more severe than those given in the sectional specification. 2 Inspection requirements 2.1 Procedures 2.1.1 For qualification approval, the procedures shall be in accordance with the sectional s
41、pecification, IEC 60384-17, 3.4. 2.1.2 For quality conformance inspection the test schedule (Table 4) includes sampling, periodicity, severities and requirements. The formation of inspection lots is covered by 3.5.1 of the sectional specification. EN 60384-17-1:2005 8 Table 4 Test schedule for quali
42、ty conformance inspection E lev. EZ lev.IL AQL n c Subclause number and testa D or ND cConditions of testa cPerformance requirementsa Group A inspection (lot-by-lot) Subgroup A0 4.2.2 Capacitance 4.2.3 Tangent of loss angle4.2.1 Voltage proof (Test A) 4.2.4 Insulation resistance (Test A) ND Frequenc
43、y : 1 kHz for all capacitance values Method: Measuring point 1a Measuring point 1a 100%g Within specified tolerance As in 4.2.3.2 No breakdown or flashover. Self-healing breakdowns allowed As in 4.2.4.3 Subgroup A1 ND S-3 2,5%b0 4.1 Visual examination As in 4.1 Legible marking and as specified in 1.
44、5 of this specification 4.1 Dimensions (gauging) As specified in Table 1 of this specification Subgroup A2 ND S-3 1,0%b0 4.2.2 Capacitance Within specified tolerance 4.2.3 Tangent of loss angle As in 4.2.3.2 4.2.1 Voltage proof (Test A) Method: No breakdown or flashover 4.2.4 Insulation resistance (
45、Test A) Method: As in 4.2.4.2 Group B inspection (lot-by-lot) Subgroup B1 ND S-3 2,5%b0 4.5 Solderability Without ageing Method: . Good tinning as evidenced by free flowing of the solder with wetting of the termina-tions or solder shall flow within . s, as applicable 4.15 Solvent resistance of the m
46、arking (if applicable) Solvent: . Solvent temperature: . Method 1 Rubbing material: . Recovery time: Legible marking 9 EN 60384-17-1:2005 Table 4 (continued) Subclause number and testaD or ND cConditions of testa Sample size and criterion of acceptability cPerformance requirementsaE EZ p n c p n c G
47、roup C inspection (periodic) Subgroup C1A Part of sample of Subgroup C1 D 6 9 1 6 5 0 4.1 Dimensions (detail) See detail specification 4.3.1 Initial measurements Capacitance Tangent of loss angle: for CR 1 F: at 1 kHz CR 1 F: at 10 kHz 4.3 Robustness of terminationsVisual examination No visible dama
48、ge 4.4 Resistance to soldering heat Method: 4.4.2 Final measurements Visual examination No visible damage Legible marking Capacitance C/C for Grade 1.1: 1 % Grade 1.2: 2 % Grade 2: 3 % of value measured in 4.3.1 Tangent of loss angle Increase of tan : for C 1 F: for Grade 1.1: 0,001Grade 1.2: 0,002G
49、rade 2: 0,004for C 1 F: see detailspecification, compared to values measured in 4.3.1 4.14 Component solvent resistance (if applicable) Solvent: . Solvent temperature: . Method 2 Recovery time: See detail specification Subgroup C1B Other part of sample of Subgroup C1 D 6 18 1 6 5 0 4.6.1 Initial measurements Capacitance Tangent of loss angle: for CR 1 F: at 1 kHz CR
