1、Fire hazard testingPart 1-10: Guidance for assessing the fire hazard of electrotechnical products General guidelinesBS EN 60695-1-10:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 60695-1-10:2
2、017. It isidentical to IEC 60695-1-10:2016. It supersedes BS EN 60695-1-10:2010which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee GEL/89, Fire hazard testing.A list of organizations represented on this committee can be obtained onrequest to its secretary.T
3、his publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 89681 1ICS 13.220.40; 29.020Compliance with a British Standard cannot
4、 confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 March 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60695-1-10:2017EUROPEAN STANDARD NORME EUROPENNE EUROPIS
5、CHE NORM EN 60695-1-10 March 2017 ICS 13.220.40; 29.020 Supersedes EN 60695-1-10:2010 English Version Fire hazard testing - Part 1-10: Guidance for assessing the fire hazard of electrotechnical products - General guidelines (IEC 60695-1-10:2016) Essais relatifs aux risques du feu - Partie 1-10: Lign
6、es directrices pour lvaluation des risques du feu des produits lectrotechniques - Lignes directrices gnrales (IEC 60695-1-10:2016) Prfungen zur Beurteilung der Brandgefahr - Teil 1-10: Anleitung zur Beurteilung der Brandgefahr von elektrotechnischen Erzeugnissen - Allgemeiner Leitfaden (IEC 60695-1-
7、10:2016) This European Standard was approved by CENELEC on 2016-12-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliog
8、raphical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respo
9、nsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finla
10、nd, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee fo
11、r Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Mem
12、bers. Ref. No. EN 60695-1-10:2017 E BS EN 60695-1-10:2017EN 60695-1-10:2017 2 European foreword The text of document 89/1341/FDIS, future edition 2 of IEC 60695-1-10, prepared by IEC/TC 89 “Fire hazard testing“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60695-1-10:2
13、017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-09-23 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-
14、12-23 This document supersedes EN 60695-1-10:2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the
15、International Standard IEC 60695-1-10:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60950-1 NOTE Harmonized as EN 60950-1. IEC 60065 NOTE Harmonized as EN
16、60065. IEC 60332-1-2 NOTE Harmonized as EN 60332-1-2. IEC 62368-1 NOTE Harmonized as EN 62368-1. IEC 60695-1 NOTE Harmonized in EN 60695-1 series. IEC 60695-2 NOTE Harmonized in EN 60695-2 series. IEC 60695-5 NOTE Harmonized in EN 60695-5 series. IEC 60695-6 NOTE Harmonized in EN 60695-6 series. IEC
17、 60695-7 NOTE Harmonized in EN 60695-7 series. IEC 60695-8 NOTE Harmonized in EN 60695-8 series. IEC 60695-9 NOTE Harmonized in EN 60695-9 series. BS EN 60695-1-10:2017EN 60695-1-10:2017 3 IEC 60695-10 NOTE Harmonized in EN 60695-10 series. IEC 60695-11 NOTE Harmonized in EN 60695-11 series. IEC 606
18、95-1-20 NOTE Harmonized as EN 60695-1-20. IEC/TS 62441 NOTE Harmonized as CLC/TS 62441. BS EN 60695-1-10:2017EN 60695-1-10:2017 4 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are n
19、ormatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified
20、 by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60079-0 - Explosive atmospheres - Part 0: Equipment -
21、 General requirements EN 60079-0 - IEC 60695-1-11 - Fire hazard testing - Part 1-11: Guidance for assessing the fire hazard of electrotechnical products - Fire hazard assessment EN 60695-1-11 - IEC 60695-1-12 - Fire hazard testing - Part 1-12: Guidance for assessing the fire hazard of electrotechnic
22、al products - Fire safety engineering - - IEC 60695-1-30 - Fire hazard testing - Part 1-30: Guidance for assessing the fire hazard of electrotechnical products - Preselection testing process - General guidelines EN 60695-1-30 - IEC 60695-4 2012 Fire hazard testing - Part 4: Terminology concerning fi
23、re tests for electrotechnical products EN 60695-4 2012 IEC Guide 104 - The preparation of safety publications and the use of basic safety publications and group safety publications - - ISO/IEC Guide 51 - Safety aspects - Guidelines for their inclusion in standards - - ISO 13943 2008 Fire safety - Vo
24、cabulary EN ISO 13943 2010 BS EN 60695-1-10:2017 2 IEC 60695-1-10:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 7 4 Fire hazards associated with electrotechnical products 9 5 Fundamentals of fire hazard testing . 10 5.1 Objectives . 1
25、0 5.2 Fire hazard and fire risk 10 5.2.1 Fire hazard 10 5.2.2 Fire risk . 12 5.3 Fire scenarios . 13 5.4 Fire-safety engineering . 15 5.5 Fire hazard assessment 15 6 Types of fire test 15 6.1 General . 15 6.2 Quantitative and qualitative groups of fire tests . 15 6.2.1 Quantitative fire tests . 15 6
26、.2.2 Qualitative fire tests . 16 6.3 Types of fire tests . 16 6.3.1 Fire simulation test 16 6.3.2 Fire resistance tests 16 6.3.3 Tests with regard to reaction to fire 16 6.3.4 Preselection fire tests 16 6.3.5 Basic property tests . 17 7 Appropriate use of qualitative fire tests 17 8 Preparation of r
27、equirements and test specifications . 17 9 Common ignition sources 18 10 Reference documents of TC 89 . 18 Annex A (informative) The power output of ignition sources . 19 A.1 General . 19 A.2 Some common electrical and non-electrical ignition sources . 19 A.3 Power source classification in IEC 62368
28、-1 9 20 Annex B (informative) Guidance publications and test methods . 21 Bibliography 23 Table 1 Common causes of ignition encountered in electrotechnical products 11 Table 2 Characteristics of fire stages (from Table 1 in ISO 19706:2011 22) . 14 Table A.1 Examples of ignition sources 20 Table B.1
29、TC 89 guidance publications and test methods 21 BS EN 60695-1-10:2017IEC 60695-1-10:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIRE HAZARD TESTING Part 1-10: Guidance for assessing the fire hazard of electrotechnical products General guidelines FOREWORD 1) The International Electrot
30、echnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To
31、this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC Nation
32、al Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO
33、) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation fr
34、om all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be h
35、eld responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any
36、divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to
37、IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual
38、 experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this
39、IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this
40、IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60695-1-10 has been prepared by IEC technical committee 89: Fire hazard testing. This second edition cancels and replaces the first edition
41、 published in 2009. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) reference to IEC 60695-1-12; b) modified Introduction and Scope; c) updated normative references; d) updated terms and definit
42、ions; e) modified Table 1; BS EN 60695-1-10:2017 4 IEC 60695-1-10:2016 IEC 2016 f) addition of Table 2; g) new text in Subclauses 5.2, 5.3 and 5.4; h) mandatory text in Clause 8; i) Annex B changed to Annex A, and modified; j) new Annex B concerning common ignition sources. The text of this standard
43、 is based on the following documents: FDIS Report on voting 89/1341/FDIS 89/1347/RVD Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directi
44、ves, Part 2. It has the status of a basic safety publication in accordance with IEC Guide 104 and ISO/IEC Guide 51. This standard is to be used in conjunction with IEC 60695-1-11 and IEC 60695-1-12. A list of all the parts in the IEC 60695 series, under the general title Fire hazard testing, can be
45、found on the IEC website. IEC 60695-1 consists of the following parts: Part 1-10: Guidance for assessing the fire hazard of electrotechnical products General guidelines Part 1-11: Guidance for assessing the fire hazard of electrotechnical products Fire hazard assessment Part 1-12: Guidance for asses
46、sing the fire hazard of electrotechnical products Fire-safety engineering Part 1-20: Guidance for assessing the fire hazard of electrotechnical products Ignitability General guidance Part 1-21: Guidance for assessing the fire hazard of electrotechnical products Ignitability Summary and relevance of
47、test methods Part 1-30: Guidance for assessing the fire hazard of electrotechnical products Preselection testing process General guidelines Part 1-40: Guidance for assessing the fire hazard of electrotechnical products Insulating liquids The committee has decided that the contents of this document w
48、ill remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific document. At this date, the document will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 60695-1-10:2017IEC 60695-1-10:2016 IEC 20
49、16 5 INTRODUCTION In the design of any electrotechnical product, the risk of fire and the potential hazards associated with fire need to be considered. In this respect the objective of component, circuit and equipment design, as well as the choice of materials, is to reduce the risk of fire to a tolerable level even in the event of reasonably foreseeable (mis)use, malfunction or failure. This standard, together with its companions, IEC 60695-1-11 and IEC 60695-1-12,
