1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationHousehold and similar electrical appliances Test code for the determination of airborne acoustical noisePart 2-10: Particular requirements for electric cooking ranges, ovens, gri
2、lls, microwave ovens and any combination of theseBS EN 60704-2-10:2011National forewordThis British Standard is the UK implementation of EN 60704-2-10:2011. It is identical to IEC 60704-2-10:2011. It supersedes BS EN 60704-2-10:2004, which will be withdrawn on 1 November 2014.The UK participation in
3、 its preparation was entrusted to Technical Committee CPL/59, Performance of household electrical appliances.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. User
4、s are responsible for its correct application. The British Standards Institution 2012ISBN 978 0 580 72040 6 ICS 17.140.20; 97.040.20 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and St
5、rategy Committee on 29 February 2012.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 60704-2-10:2011EUROPEAN STANDARD EN 60704-2-10 NORME EUROPENNE EUROPISCHE NORM December 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Norma
6、lisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60704-2-10:2011 E ICS 17.140.20; 97.040.20 Supe
7、rsedes EN 60704-2-10:2004English version Household and similar electrical appliances - Test code for the determination of airborne acoustical noise - Part 2-10: Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these (IEC 60704-2-10:2011) Appa
8、reils lectrodomestiques et analogues - Code dessai pour la dtermination du bruit arien - Partie 2-10: Rgles particulires pour les cuisinires, les fours, les grils, les fours micro-ondes et toute combinaison de ces appareils (CEI 60704-2-10:2011) Elektrische Gerte fr den Hausgebrauch und hnliche Zwec
9、ke - Prfvorschrift fr die Bestimmung der Luftschallemission - Teil 2-10: Besondere Anforderungen fr elektrische Herde, Backfen, Grills, Mikrowellengerte und alle Kombinationen davon (IEC 60704-2-10:2011) This European Standard was approved by CENELEC on 2011-11-01. CENELEC members are bound to compl
10、y with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
11、Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has
12、 the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
13、Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 60704-2-10:2011EN 60704-2-10:2011 - 2 - Foreword The text of document 59K/224/FDIS, future edition 2 of IEC 60704-2-10, prepared by SC 59K, “Ovens and microwave ovens, cooking
14、 ranges and similar appliances“, of IEC/TC 59, “Performance of household electrical appliances“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60704-2-10:2011. The following dates are fixed: latest date by which the document has to be implemented at national level by pu
15、blication of an identical national standard or by endorsement (dop) 2012-08-01 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2014-11-01 This document supersedes EN 60704-2-10:2004. Compared to EN 60704-2-10:2004, EN 60704-2-10:2011 doesnt contai
16、n the description of an appropriate test enclosure which has now been incorporated in Part 1. EN 60704-2-10:2011 is intended to be used in conjunction with EN 60704-1:2010, Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 1: General requir
17、ements. NOTE When “Part 1” is mentioned in this standard, it refers to EN 60704-1. This Part 2-10 supplements or modifies the corresponding clauses in EN 60704-1, so as to establish the test code for electric cooking ranges, ovens, grills, microwave ovens and any combination of these. When a particu
18、lar subclause of Part 1 is not mentioned in this Part 2-10, that subclause is applicable as far as reasonable. Where this Part 2-10 states “addition“, “modification“ or “replacement“, the relevant requirements, test specifications or explanatory matter in Part 1 is to be adapted accordingly. Subclau
19、ses, tables and figures that are numbered starting from 101 are additional to those in Part 1. Unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a replaced clause or subclause. Additional annexes are lettered AA, BB, etc. Attentio
20、n is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60704-2-10:2011 was approved by
21、CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60350:1999 NOTE Harmonized as EN 60350:1999 (not modified). CISPR 11:2009 NOTE Harmonized as EN 55011:2009 (modified). BS EN 60704
22、-2-10:2011- 3 - EN 60704-2-10:2011 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. F
23、or undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Addition to Annex ZA of EN 60704-1:2010: Publication Year Title E
24、N/HD Year ISO 7235 2003 Acoustics - Laboratory measurement procedures for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss EN ISO 7235 2003 BS EN 60704-2-10:2011 4 60704-2-10 IEC:2011 INTRODUCTION The measuring conditions specified in this Part 2-10 of IEC
25、 60704 provide for sufficient accuracy in determining the noise emitted and comparing the results of measurements taken by different laboratories, whilst simulating as far as possible the practical use of electric cooking ranges, ovens, grills, microwave ovens and any combination of these. It is rec
26、ommended to consider the determination of noise levels as part of a comprehensive testing procedure covering many aspects of the properties and performance of household appliances. Compared to the first edition (2004) of this Part 2-10, the second edition doesnt contain the description of an appropr
27、iate test enclosure which has now been incorporated in Part 1. NOTE As stated in the Introduction to IEC 60704-1, this test code is concerned with airborne noise only. BS EN 60704-2-10:201160704-2-10 IEC:2011 5 HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES TEST CODE FOR THE DETERMINATION OF AIRBORNE A
28、COUSTICAL NOISE Part 2-10: Particular requirements for electric cooking ranges, ovens, grills, microwave ovens and any combination of these 1 Scope and object This clause of Part 1 is applicable except as follows: 1.1 Scope 1.1.1 General Addition: These particular requirements apply to electric cook
29、ing ranges, ovens, grills, microwave ovens and any combination of these for household and similar use. NOTE 101 These particular requirements do not apply to hobs due to lack of standardised load (pans) representative of normal use and ensuring a good repeatability of tests. For these applications,
30、the loading and operating conditions are under consideration. This standard does not apply to appliances or parts of appliances that use gas energy. 1.1.2 Types of noise Replacement: The methods specified in ISO 3743-1, ISO 3743-2 and ISO 3744 can be used for measuring noise emitted by electric cook
31、ing ranges, ovens, grills, microwave ovens and any combination of these. 1.1.3 Size of the source Replacement: The method specified in ISO 3744 is applicable to noise sources of any size. When applying ISO 3743-1 and ISO 3743-2, care should be taken that the maximum size of the appliance under test
32、fulfils the requirements specified in 1.3 of ISO 3743-1:1994 and ISO 3743-2:1994. 1.2 Object Addition: The methods described are specified for appliances without an operator present. Requirements for the declaration of noise emission values are not within the scope of this standard. NOTE 101 For det
33、ermining and verifying noise emission values declared in product specifications, see IEC 60704-3. BS EN 60704-2-10:2011 6 60704-2-10 IEC:2011 1.3 Measurement uncertainty Replacement: The estimated values of standard deviations of sound power levels, determined according to this standard, are as foll
34、ows: Table 101 Standard deviations of sound power levels Standard deviation dB r(repeatability) R(reproducibility) 0,4 1,0 1.101 Standard deviation for declaration and verification For the purpose of determining and verifying declared noise emission values according to IEC 60704-3, the following val
35、ues apply: Table 102 Standard deviations for declaration and verification Standard deviation dB P(production) t(total) M(reference) 1,0 1,7 1,4 2,0 2,0 2 Normative references This clause of Part 1 is applicable except as follows. Addition: ISO 7235:2003, Acoustics - Laboratory measurement procedures
36、 for ducted silencers and air-terminal units - Insertion loss, flow noise and total pressure loss 3 Terms and definitions This clause of Part 1 is applicable except as follows. Addition: 3.101 cooking range appliance having a hob and at least one oven; it may incorporate a grill IEC 60350:1999, defi
37、nition 3.1 3.102 hob appliance or part of an appliance which incorporates one or more cooking zones IEC 60350:1999, definition 3.2 NOTE 101 A hob is also known as a cook top. BS EN 60704-2-10:201160704-2-10 IEC:2011 7 3.103 oven appliance or compartment of a cooking range in which food is cooked by
38、radiation, by natural convection, by forced-air circulation, by steam or by a combination of these heating methods IEC 60350:1999, definition 3.10 3.104 grill appliance or part of an appliance in which food is cooked by radiant heat IEC 60350:1999, definition 3.9 3.105 steam function function by whi
39、ch food is heated with steam up to boiling temperature of water at ambient pressure 3.106 hot steam function function by which food is heated with hot steam (T 100 C) at ambient pressure Amendment 1:2005 of IEC 60350:1999, definition 3.18 modified 3.107 forced air circulation function heat transmiss
40、ion to the food by forced air convection, i.e. circulating the air with the help of a fan Amendment 1:2005 of IEC 60350:1999, definition 3.17 NOTE 101 This does not include circulated functions that operate a grill element only. 3.108 microwave oven appliance using electromagnetic energy in the ISM
41、frequency band of 2450 MHz for heating food and beverages in the cavity IEC 60705:2010, definition 3.1 NOTE 101 The microwave oven may incorporate a browning element. NOTE 102 ISM frequency bands are the electromagnetic frequencies established by the ITU and reproduced in CISPR 11. 3.109 other heati
42、ng function heating by energy other than microwave 3.110 cooling fan fan integrated in an appliance for the purpose of avoiding excessive temperatures BS EN 60704-2-10:2011 8 60704-2-10 IEC:2011 3.111 standard test load for functions using microwave energy, a cylindrical container of borosilicate gl
43、ass with a maximum wall thickness of 3 mm, an outside diameter of approximately 190 mm and a height of approximately 90 mm, filled with 1000 g 50 g of water at 20 C 5 C NOTE 101 A glass rod or similar is placed in the glass container to prevent accidents due to the boiling delay factor. NOTE 102 To
44、avoid noise from boiling water the load has to be changed before the measurements. NOTE 103 Other heating functions are operated and measured without load. 4 Measurement methods and acoustical environments This clause of Part 1 is applicable except as follows. 4.2 Direct method Addition: NOTE 101 If
45、 pure tone components are present in the noise emitted by the source, the estimated standard deviation of the measured sound pressure levels in the special reverberation room may increase. In such cases additional microphone positions or source positions may be necessary as specified in ISO 3743-2.
46、4.3 Comparison method Addition: NOTE 101 If pure tone components are present in the noise emitted by the source, the estimated standard deviation of the measured sound pressure levels in the hard-walled test room or in the special reverberation room may increase. In such cases additional microphone
47、positions or source positions may be necessary as specified in ISO 3743-1 or ISO 3743-2. 5 Instrumentation This clause of Part 1 is applicable. 6 Operation and location of appliance under test This clause of Part 1 is applicable except as follows. 6.1 Equipping and pre-conditioning of appliances 6.1
48、.1 Replacement: The appliance is equipped with drive units and accessories that are necessary to run the motor(s). All other accessories for example roasting trays, oven cavity dividers, baking sheets, grill grids etc. shall be removed. If according to the manufacturers instructions an appliance wit
49、h integrated air extraction can be connected to an exhaust device, the standard exhaust as described in Figure 101 shall be connected. It consists of a pipe connected to a muffler. The pipe shall be metallic with smooth inner walls and shall have the widest diameter among those specified by the manufacturer. If not stated, a standard pipe with the best fitting diameter shall be used. The muffler shall have an insertion loss as specified in the table of Figure 101. It
