1、3404583 0339303 044 = BRITISH STANDARD A Methods of measurement for equipment used in digital microwave radio transmission systems Part 3. Measurements on satellite earth stations Section 3.1 General The European standard EN 608353-1 : 1992 has the status of a British Standard UDC 621.396.6 : 629.78
2、3: 621.317.08 BS EN BS 7573 : Section 3.1 : 1992 IEC 8353-1 : 1990 60835-3-1 : 1994 : - W 3404583 OL39L04 TBO BS 7573 : Section 3.1 : 1992 Committees responsible for this British Standard The preparation of this British Standard was entrusted by the Electronic Equipment Standards Policy Committee (E
3、EU-) to %chnicd Committee EEU25, upon which the following bodies were represented: British Broadcasting Corporation British Radio and Electronic Equipment Manufacturers Association British klecommunications plc Independent llevision Commission Institution of Electrical Engineers Radio, Electrical an
4、d “levision Retailers Association Radiocommunications Agency The foliowing bodies were also represented in the drafting of the standard, through subcommittees and panels: EEA (the Association of the Electronics, lecommunications and Business Equipment Industries) ERA Ikchnology Ltd. GAMBICA (BEAMA L
5、td.) This British Standard, having been prepared under the direction of the Electronic Eauipment Standards Policl, Amendments issued since publication Amd. No. Cornkittee, was published - under the authority of the Standards Board and comes into effect on i Date 1 April 1992 o BSI 1992 The foliowing
6、 BSI references relate to the work on this standard: Committee reference EEU2.5 Draft for comment 91/22366 DC ISBN O 580 20758 7 BS 7573 : Section 3.1 : 1992 National foreword A This Section of BS 7573 has been prepared under the direction of the Electronic Equipment Standards Policy Committee. It i
7、s identical with IEC 835-3- 1 Methods of measurement for equipment used in digital microwave radio transmission systems Part 3 : Measurements on satellite earth stations Section One - General, pubished by the international Electrotechnicd Commission in 1992 the European Committee for Elchnical Stand
8、ardization (CENELEC) accepted IEC 835-3-1 : 1990 as European Standard EN 608353.1 : 1992. As a consequence of implementing the European Standard this British Standard is renumbered as BS EN 608353.1 and any reference to Bs 7573 : Section 3.1 should be read as a reference to BS EN 6083531. BS 7573 is
9、 published in three Parts. The other Parts are: (IEC). Part 1 Measurements common to terrestrial radio-relay systems and satellite earth stations Part 2 Measurements on terrestrial radio-relay systems This Section of BS 7573 is intended to be used in conjunction with BS 7573 : Part 1 : Section 1.1.
10、Cross-reference International standard Corresponding British Standard IEC 835-1-1 : 1990 BS 7573 Methods of measurement for equipment used in digital microwave radio transmission systems Part 1 Measurements common to terrestrial radio-relay systems and satellite earth stations Section 1.1 : 1992 Gen
11、eral (Identical) #zr Compliance with a British Standard does not of itself confer immunity from legal obligations. .- .:.I. EUROPEAN mARD NORME EUR0PEE”E EXJROP&SCm NORM A m 3404583 01391Ob 853 m EN 608353.1 November 1992 UDC 621.396.6 : 629.783 : 621.317.08 Descriptors: Radiocommunications, telecom
12、munications, communication equipment, earth stations, satellite bmadcashg, microwave frequencies, measurements, characteristics, general English version Methods of measurement for equipment used in digital microwave radio transmission systems Part 3: Measurements on satellite earth stations Section
13、one: General (IEC 83531 : 1990) Mthodes de mesure applicables au matriel utilis pour les Systemes de transmission numrique en hyperfrquence Mikrowellen-Funkuberh-agungsy stemen Troisime partie: Mesures applicables aux stations terriennes de tlcommunications par sateiite Section un: Gnralits (CE1 835
14、3-1 : 1990) MeGverfahren fur Gerate in digitalen Teil 3 Messungen an Satelliten-Erdfunkstellen Hauptahschnitt eins: Allgemeines (IEC 835-3-1 : 1990) This European Standard was approved by CENELEC on 1992-09-15. CENELEC members are bound to comply with the CENKENELEC Internal Regulations which stipul
15、ate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard
16、 exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national
17、electrotechnical committees of Austria, Belgium, Denmark, Finland, Fkance, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Ele&otechnical Standardization Comit Europen de Normalisation
18、Electrotechnique EuropaiCches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B-1050 Brussels O 1992 Copyright reserved to CENELEC members Ref. No. EN 60835-3-1 : 1992 E it: Previous page is blank Page 2 EN 60835-3-1 : 1992 Foreword The CENELEC questionnaire procedure,
19、performed for fu7dmg out whether or not the Intemational Standard iEC 83531 : 1990 could be accepted without textual changes, has shown that no common modincations were necessary for the acceptance as a European Standard. The reference document was submitted to the CENELEC members for formal vote an
20、d was approved by CENELEC as EN 60833531 on 15 September 1992. The following dates were ked: - West date of publication of an identical national standard (dop) 199309-01 - latest date of withdrawal of conflicting national standards (dow) 199309-01 3404583 l13L07 7T - Annexes designated nonnative are
21、 part of the body of the standard. In this standard, annex ZA is normative. 3404583 0139108 b2b 835-3-1 0 IEC METHODS OF MEASUREMENT FOR EQUIPMENT USED IN DIGITAL MICROWAVE RADIO TRANSMISSION SYSTEMS Part 3: Measurements on satellite earth stations SECTION ONE - GENERAL 1. Scope This part of the sta
22、ndard, which is supplementary to Part 1, IEC 835-1 -1, describes methods of measurement applicable to satellite earth station systems using digital modulation. The object of this part is to provide recommended methods of mea- surement for assessing the essential properties of satellite earth station
23、 systems as well as the associated sub-systems and it is intended to be used in conjunction with Part 1, IEC 835-1-1. Where rneasu rements common to terrestrial radio- relay and satellite earth station systems are required, reference is made to the appro- priate section of Part 1, IEC 835-1-1. In su
24、ch cases, only those special aspects of the measurement appropriate to satellite earth station systems are described in the sections of this Part 3. Where parameters or methods of measurement are applicable only to satellite earth station systems, they are fully described within the appropriate sect
25、ions of this part. 2. Normative references The following IEC publication is quoted in this standard: Publication No. 835-1-1 (1990) : Methods of measurement for equipment used in digital microwave radio trans- mission systems, Part 1 : Measurements common to terrestrial radio-relay systems and satel
26、lite earth stations. Section One - General. A 3404583 0339309 562 Page 3 EN 608353-1 : 1992 Annex ZA (normative) Other international publications quoted in this standard with the references of the relevant European publications When the international publication has been rnodined by CENELEC common m
27、odifications, indicated by (mod), the relevant EN/HD applies. IEC Publication Date litle EN/HD Date 8351-1 1990 Methods of measurement for equipment wed in digital EN60835-1-1 1992 micrrnoave radw trnnsmism systems Part 1: Measurements comrnm to terrestriol rad.iO-relay systems and sateite earth sta
28、tions section one: Geneml Previous page is blank W 340Li583 OL39LLO 284 . BS 7573 : Section 3.1 : 1992 Publication(s) referred to See national foreword. 3404583 0137111 110 = . BS 7573 : Section 3.1 : 1992 IEC 835-3-1 : 1990 BSI 2 Park Street London W1A 2BS BSI Linford Wood Milton Keynes MK14 6LE BS
29、I - British Standards Institution BSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter. Contract requirements A British Standard does not purport to include
30、 all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Revisions British Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions. Any person who fin
31、ds an inaccuracy or ambiguity while using this British Standard should notify BSI without delay so that the matter may be investigated swiftly. BSI offers members an individual updating service called PLUS which ensures that subscriben automatically receive the latest editions of standards. Buying B
32、ritish Standards Orders for all British Standard publications should be addressed to the Sales Department at Milton Keynes. Information on standards BI provides a wide range of information on national, European and international standards through its Library, the Standardline Database, the BSI Infor
33、mation Rchnology Service (BlIS) and its Technical Help to Exporters Service. Contact Customer Information at Milton Keynes: Rl: 0908 22 1166. Subscribing members of BSI are kept up to date with standards developments and receive substantial discounts on the purchase price of standards. For details o
34、f these and other benefits contact the Manager, Membership Development at Milton Keynes: Tel: 0908 220022. Copyright Copyright subsists in all BSI publications. No part of this publication may be reproduced in any form without the prior permission in writuig of BSI. This does not preclude the free u
35、se, in the course of implementing the standard, of details such as symbols and size, type or grade designations. Enquiries about copyright should be made to the Copyright Manager, Publications at Milton Keynes. EEU25 ! = 3404583 0139112 057 AMD8340 Amendment No. 1 published and effective from 16 Oct
36、ober 1994 to BS 7673 : Section 3.1 : 1992 Methods of measurement for equipment used in digital microwave radio transmission systems Part 3. Measurements on satellite earth stations Section 3.1 General NOTE. The European Committee for Electrotechnical Standardization (CENELEC) has accepted IEC 8353-1
37、 : 1990 as a European Standard designated as EN 608353-1 : 1992. This amendment implements EN 608353-1 : 1992 as a British Standard in the BS EN series. Implementation of European Standard National foreword At the end of paragraph 1 irisert the foilowing new pvh. In 1992 the European commiaee for El
38、ectrotechnical %mon (CENELEC) accepted IEC 8353-1 : 1990 as European Standard EN 6083531 : 1992. As a consequence of implementing the European Standard this British Standard is renumbered as BS EN 6083531 and any reference to Bs 7573 : Section 3.1 should be read as a reference to J3S EN 6W35-3-1. AM
39、D 8340/0ctober 1994 _- 941W.Sk- DP EEL25 Methods of measurement for equipment used in digital microwave radio transmission systems Part 3. Measurements on satellite earth stations Section 3.1 General BS EN 1 608363-1 : 1994 BS 7673 : Section 3.1 : 1992 IEC 8353-1 : 1990 The European Standard EN 6083
40、531 : 1992 has the status of a British Standard UDC 621.306.6 : 629.783 : 621.317.08 I _ 3404583 OL3LL4 2T EUROPEAN STANDARD EN 608353-1 NORNE EUR0PEE”E EUROPmE NORM November 1992 UDC 621.396.6 : 629.783 : 621.317.08 Descriptors: Wocommunications, telecommunications, communication equipment, earh st
41、ations, satellite broadcasting, microwave frequencies, measurements, characteristics, general English version Methods of measurement for eqyipment used in digital microwave radio transmission systems Part 3: Measurements on satellite earth stations Section one: General (IEC 8353-1 : 1990) Mthodes de
42、 mesure applicables au matriel MeBverfahren fr utilis pour les Systemes de transmission Gerte in digitalen numrique en hyperfrquence Mikrowellen-Funkbertragungsystemen Troisime partie: Mesures applicables aux stations Teil 3 Messungen an Satelliten-Erdfunkstellen terriennes de tlcommunications par s
43、atellite Hauptabschnitt eins Allgemeines Section un: Gnralits (CE1 8353-1 : 1990) (m.3 835-3-1 : 1990) This European Standard was approved by CENELEC on 1992-09-15. CENELEC members are bound to comply with the CENKENELEC Internal Regulations which stipulate the conditions for giving this European St
44、andard the status of a national standard without any alteration. Uptodate iists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, Fre
45、nch, German). A version in any other ianguage made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austxia, Belgium,
46、 Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. CENELEC European Committee for Electrotechnical Standardization Comit Europen de Nomalisation Electrotechnique Europisches Komitee fr Elektro
47、technische Normung Centrai Secretariat: rue de Stassart 35, B-1060 Brussels O 1992 Copyright reserved to CENELEC members Ref. No. EN 60835-3-1 : 1992 E Page 2 EN 608353-1 : 1992 Foreword The CEh-ELEC questionnaire procedure, performed for finding out whether or not the International Standard IEC 835
48、31 : 1990 could be accepted without kxtua changes, has shown that no common modifcations were necessary for the acceptance as a European Standard The reference document was submitted to the CENELEC members for formal vote and was approved by CENELEC as EN 6083531 on 15 September 1992. The following
49、dates were fixed: - latest date of publication of an identical national standard (dop) 19930941 - latest date of withdrawal of conflicting national standards (dow) 1993-0941 Annexes designated normative are part of the body of the standard. in this standard, annex ZA is normative. ! 3Y04583 013911b 7T2 Page 3 EN 608363-1 : 1992 Annex ZA (normative) Other international publications quoted in this standard with the references of the relevant European publication
