1、Industrial communication networks Fieldbus specifications Part 3-8: Data-link layer service definition Type 8 elementsBS EN 61158-3-8:2008raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsNational forewordThis British Standard is th
2、e UK implementation of EN 61158-3-8:2008. It isidentical to IEC 61158-3-8:2007. Together with all of the other sections of BS EN 61158-3, it supersedes BS EN 61158-3:2004 which is withdrawn.The UK participation in its preparation was entrusted to Technical CommitteeAMT/7, Industrial communications:
3、process measurement and control, includ-ing fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 200ISBN
4、 978 0 580 61565 8ICS 25.040.40; 35.100.20; 35.240.50Compliance with a British Standard cannot confer immunity fromlegal obligations.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN EN 61158-3-8:20089This British Standard was published under the authority of the St
5、andardsPolicy and Strategy Committee on 31 January 2009. EUROPEAN STANDARD EN 61158-3-8 NORME EUROPENNE EUROPISCHE NORM February 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Centr
6、al Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61158-3-8:2008 E ICS 35.100.20; 25.040.40 Partially supersedes EN 61158-3:2004 English version Industrial communication net
7、works - Fieldbus specifications - Part 3-8: Data-link layer service definition - Type 8 elements (IEC 61158-3-8:2007) Rseaux de communication industriels - Spcifications des bus de terrain - Partie 3-8: Dfinition des services des couches de liaison de donnes - Elments de type 8 (CEI 61158-3-8:2007)
8、Industrielle Kommunikationsnetze - Feldbusse - Teil 3-8: Dienstfestlegungen des Data Link Layer (Sicherungsschicht) - Typ 8-Elemente (IEC 61158-3-8:2007) This European Standard was approved by CENELEC on 2008-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which
9、stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European St
10、andard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the nat
11、ional electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Swed
12、en, Switzerland and the United Kingdom. BS EN 61158-3-8:2008EN 61158-3-8:2008 - 2 - Foreword The text of document 65C/473/FDIS, future edition 1 of IEC 61158-3-8, prepared by SC 65C, Industrial networks, of IEC TC 65, Industrial-process measurement, control and automation, was submitted to the IEC-C
13、ENELEC parallel vote and was approved by CENELEC as EN 61158-3-8 on 2008-02-01. This and the other parts of the EN 61158-3 series supersede EN 61158-3:2004. With respect to EN 61158-3:2004 the following changes were made: deletion of Type 6 fieldbus, and the placeholder for a Type 5 fieldbus data-li
14、nk layer, for lack of market relevance; addition of new fieldbus types; partition into multiple parts numbered 3-1, 3-2, , 3-19. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop
15、) 2008-11-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2011-02-01 NOTE Use of some of the associated protocol types is restricted by their intellectual-property-right holders. In all cases, the commitment to limited release of intellectual-propert
16、y-rights made by the holders of those rights permits a particular data-link layer protocol type to be used with physical layer and application layer protocols in type combinations as specified explicitly in the EN 61784 series. Use of the various protocol types in other combinations may require perm
17、ission from their respective intellectual-property-right holders. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61158-3-8:2007 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the
18、 following notes have to be added for the standards indicated: IEC 61158-2 NOTE Harmonized as EN 61158-2:2008 (not modified). IEC 61158-4-8 NOTE Harmonized as EN 61158-4-8:2008 (not modified). IEC 61158-5-8 NOTE Harmonized as EN 61158-5-8:2008 (not modified). IEC 61158-6-8 NOTE Harmonized as EN 6115
19、8-6-8:2008 (not modified). IEC 61784-1 NOTE Harmonized as EN 61784-1:2008 (not modified). IEC 61784-2 NOTE Harmonized as EN 61784-2:2008 (not modified). _ BS EN 61158-3-8:2008- 3 - EN 61158-3-8:2008 Annex ZA (normative) Normative references to international publications with their corresponding Euro
20、pean publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publ
21、ication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year ISO/IEC 7498-1 -1)Information technology - Open Systems Interconnection - Basic Reference Model: The Basic Model EN ISO/IEC 7498-1 19952)ISO/IEC 7498-3 -1)Information
22、technology - Open Systems Interconnection - Basic Reference Model: Naming and addressing - - ISO/IEC 10731 -1)Information technology - Open Systems Interconnection - Basic Reference Model - Conventions for the definition of OSI services- - 1)Undated reference. 2)Valid edition at date of issue. BS EN
23、 61158-3-8:2008 2 61158-3-8 IEC:2007(E) CONTENTS INTRODUCTION.6 1 Scope.7 1.1 Overview .7 1.2 Specifications 7 1.3 Conformance.7 2 Normative references8 3 Terms, definitions, symbols, abbreviations and conventions 8 3.1 Reference model terms and definitions 8 3.2 Service convention terms and definit
24、ions .9 3.3 Common data-link service terms and definitions.9 3.4 Additional Type 8 data-link specific definitions11 3.5 Common symbols and abbreviations 12 3.6 Common conventions 12 4 Data-link service and concepts .13 4.1 Overview .13 4.2 Sequence of primitives 15 4.3 Connection-mode data-link serv
25、ices.18 5 DL-management service .22 5.1 Scope22 5.2 Facilities of the DL-management service22 5.3 Overview of services22 5.4 Overview of interactions.23 5.5 Detailed specification of services and interactions26 Bibliography32 Figure 1 Relationships of DLSAPs, DLSAP-addresses and group DL-addresses .
26、10 Figure 2 Relationships of DLCEPs and DLCEP-addresses to default DLSAP.14 Figure 3 Sequence of primitives for the buffer data transfer 17 Figure 4 Normal data transfer service between a master and a slave 18 Figure 5 Sequence of primitives for a failed normal data transfer 18 Figure 6 Sequence of
27、primitives for the reset service24 Figure 7 Sequence of primitives for the event service .24 Figure 8 Sequence of primitives for the set value service25 Figure 9 Sequence of primitives for the get value service25 Figure 10 Sequence of primitives for the get current configuration service 25 Figure 11
28、 Sequence of primitives for the get active configuration service 25 Figure 12 Sequence of primitives for the set active configuration service 26 Table 1 Summary of DL-connection-mode primitives and parameters16 Table 2 Put buffer primitive and parameters .19 Table 3 Get buffer primitive and paramete
29、rs .19 Table 4 Buffer received primitive and parameters .20 Table 5 Normal data transfer primitive and parameters .21 BS EN 61158-3-8:200861158-3-8 IEC:2007(E) 3 Table 6 Summary of DL-management primitives and parameters 24 Table 7 Reset service primitives and parameters26 Table 8 Event service prim
30、itive and parameters27 Table 9 Set value service primitives and parameters.27 Table 10 Get value service primitives and parameters 28 Table 11 Get current configuration service primitives and parameters.29 Table 12 Get active configuration service primitives and parameters.30 Table 13 The active con
31、figuration parameter 30 Table 14 Set active configuration service primitives and parameters .31 BS EN 61158-3-8:2008 6 61158-3-8 IEC:2007(E) INTRODUCTION This part of IEC 61158 is one of a series produced to facilitate the interconnection of automation system components. It is related to other stand
32、ards in the set as defined by the “three-layer” fieldbus reference model described in IEC/TR 61158-1. Throughout the set of fieldbus standards, the term “service” refers to the abstract capability provided by one layer of the OSI Basic Reference Model to the layer immediately above. Thus, the data-l
33、ink layer service defined in this standard is a conceptual architectural service, independent of administrative and implementation divisions. BS EN 61158-3-8:200861158-3-8 IEC:2007(E) 7 INDUSTRIAL COMMUNICATION NETWORKS FIELDBUS SPECIFICATIONS Part 3-8: Data-link layer service definition Type 8 elem
34、ents 1 Scope 1.1 Overview This part of IEC 61158 provides common elements for basic time-critical messaging communications between devices in an automation environment. The term “time-critical” is used to represent the presence of a time-window, within which one or more specified actions are require
35、d to be completed with some defined level of certainty. Failure to complete specified actions within the time window risks failure of the applications requesting the actions, with attendant risk to equipment, plant and possibly human life. This standard defines in an abstract way the externally visi
36、ble service provided by the Type 8 fieldbus data-link layer in terms of a) the primitive actions and events of the service; b) the parameters associated with each primitive action and event, and the form which they take; and c) the interrelationship between these actions and events, and their valid
37、sequences. The purpose of this standard is to define the services provided to the Type 8 fieldbus application layer at the boundary between the application and data-link layers of the fieldbus reference model, and systems management at the boundary between the data-link layer and systems management
38、of the fieldbus reference model. 1.2 Specifications The principal objective of this standard is to specify the characteristics of conceptual data-link layer services suitable for time-critical communications, and thus supplement the OSI Basic Reference Model in guiding the development of data-link p
39、rotocols for time-critical communications. A secondary objective is to provide migration paths from previously-existing industrial communications protocols. This specification may be used as the basis for formal DL-Programming-Interfaces. Nevertheless, it is not a formal programming interface, and a
40、ny such interface will need to address implementation issues not covered by this specification, including a) the sizes and octet ordering of various multi-octet service parameters, and b) the correlation of paired request and confirm, or indication and response, primitives. 1.3 Conformance This stan
41、dard does not specify individual implementations or products, nor does it constrain the implementations of data-link entities within industrial automation systems. There is no conformance of equipment to this data-link layer service definition standard. Instead, conformance is achieved through imple
42、mentation of the corresponding data-link protocol that fulfills the Type 8 data-link layer services defined in this standard. BS EN 61158-3-8:2008 8 61158-3-8 IEC:2007(E) 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refer
43、ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ISO/IEC 7498-1, Information technology Open Systems Interconnection Basic Reference Model Basic Reference Model: The Basic Model ISO/IEC 7498-3, Informatio
44、n technology Open Systems Interconnection Basic Reference Model Basic Reference Model: Naming and addressing ISO/IEC 10731, Information technology Open Systems Interconnection Basic Reference Model Conventions for the definition of OSI services 3 Terms, definitions, symbols, abbreviations and conven
45、tions For the purposes of this document, the following terms, definitions, symbols, abbreviations and conventions apply. 3.1 Reference model terms and definitions This standard is based in part on the concepts developed in ISO/IEC 7498-1 and ISO/IEC 7498-3, and makes use of the following terms defin
46、ed therein: 3.1.1 DL-address 7498-33.1.2 DL-connection 7498-13.1.3 DL-connection-end-point 7498-13.1.4 DL-connection-end-point-identifier 7498-13.1.5 DL-connection-mode transmission 7498-13.1.6 DL-connectionless-mode transmission 7498-13.1.7 correspondent (N)-entities correspondent DL-entities (N=2)
47、 correspondent Ph-entities (N=1) 7498-13.1.8 (N)-entity DL-entity (N=2) Ph-entity (N=1) 7498-13.1.9 (N)-layer DL-layer (N=2) Ph-layer (N=1) 7498-13.1.10 layer-management 7498-13.1.11 DL-local-view 7498-33.1.12 DL-name 7498-33.1.13 naming-(addressing)-domain 7498-33.1.14 peer-entities 7498-1BS EN 611
48、58-3-8:200861158-3-8 IEC:2007(E) 9 3.1.15 primitive name 7498-33.1.16 DL-protocol 7498-13.1.17 DL-protocol-connection-identifier 7498-13.1.18 DL-protocol-data-unit 7498-13.1.19 reset 7498-13.1.20 (N)-service DL-service (N=2) Ph-service (N=1) 7498-13.1.21 (N)-service-access-point DL-service-access-po
49、int (N=2) Ph-service-access-point (N=1) 7498-13.1.22 DL-service-access-point-address 7498-33.1.23 DL-service-connection-identifier 7498-13.1.24 DL-service-data-unit 7498-13.1.25 DL-simplex-transmission 7498-13.1.26 systems-management 7498-13.1.27 DLS-user-data 7498-13.2 Service convention terms and definitions This standard also makes use of the
