1、BSI Standards PublicationRadio-frequency connectorsPart 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 Wcable networks (type F-Quick)BS EN 61169-47:2015National forewordThis British Standard is the UK implementation of EN 61169-47:2015
2、. It isidentical to IEC 61169-47:2015. It supersedes BS EN 61169-47:2012 which iswithdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/46, Cables, wires and waveguides, radio frequency connectors and accessories for communication and signalling.A list of organizat
3、ions represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN
4、978 0 580 85908 3ICS 33.120.30 Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2015. Amendments/corrigenda issued since publicationDate Text affectedBRITIS
5、H STANDARDBS EN 61169-47:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61169-47 July 2015 ICS 33.120.30 Supersedes EN 61169-47:2012 English Version Radio-frequency connectors - Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use i
6、n 75 cable networks (type F-Quick) (IEC 61169-47:2015) Connecteurs pour frquences radiolectriques - Partie 47: Spcification intermdiaire relative aux connecteurs coaxiaux pour frquences radiolectriques avec accouplement par serrage, spcifiquement utiliss dans les rseaux cbls 75 (type F-Quick) (IEC 6
7、1169-47:2015) Hochfrequenzsteckverbinder - Teil 47: Rahmenspezifikation fr koaxiale Hochfrequenzsteckverbinder mit Klemmkupplung, vorzugsweise fr den Einsatz in 75-Kabelnetzen (Typ F-Quick) (IEC 61169-47:2015) This European Standard was approved by CENELEC on 2015-05-04. CENELEC members are bound to
8、 comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CE
9、NELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Cent
10、re has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Ital
11、y, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr E
12、lektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61169-47:2015 E BS EN 61169-47:2015EN 61169-47:2015 - 2 - European foreword The text of d
13、ocument 46F/272/CDV, future edition 2 of IEC 61169-47, prepared by SC 46F “R.F. and microwave passive components“ of IEC/TC 46 “Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
14、 EN 61169-47:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-02-04 latest date by which the national standards conflicting with the document have to be withdra
15、wn (dow) 2018-05-04 This document supersedes EN 61169-47:2012. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The
16、text of the International Standard IEC 61169-47:2015 was approved by CENELEC as a European Standard without any modification. BS EN 61169-47:2015- 3 - EN 61169-47:2015 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following
17、 documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an Inter
18、national Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 61169-1 2013 Rad
19、io-frequency connectors - Part 1: Generic specification - General requirements and measuring methods EN 61169-1 2013 IEC 61169-24 2009 Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 ohm cable networks (t
20、ype F) EN 61169-24 2009 IEC 62037 Series Passive RF and microwave devices, intermodulation level measurement EN 62037 Series IEC 62037-3 - Passive RF and microwave devices, intermodulation level measurement - Part 3: Measurement of passive intermodulation in coaxial connectors EN 62037-3 - BS EN 611
21、69-47:2015 2 IEC 61169-47:2015 IEC 2015 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references. 6 3 Interface dimensions 6 3.1 Dimensions . 6 3.1.1 Common dimensions 6 3.1.2 Example of connector “F-Quick” type male plug with resilient outer conductor sleeve (indoor) physical dimensions . 7 3.1.3 Exa
22、mple of connector “F-Quick” type male plug with slotted outer conductor (indoor) physical dimensions 8 3.1.4 Example of connector “F-Quick” type male plug with slotted outer conductor and snap ring (indoor) physical dimensions. 8 3.2 Mechanical gauges . 9 4 Quality assessment procedures . 10 4.1 Gen
23、eral . 10 4.2 Ratings and characteristics . 10 4.3 Environmental characteristics for outdoor sockets 12 4.4 Test schedule and inspection requirements 12 4.4.1 Acceptance tests 12 4.4.2 Periodic tests . 12 4.5 Procedures for the quality conformance . 14 4.5.1 Quality conformance inspection 14 4.5.2 Q
24、uality conformanceand its maintenance General procedure 14 5 Instructions for preparation of detail specifications . 14 5.1 General . 14 5.2 Identification of the component 14 5.3 Performance . 15 5.4 Marking, ordering information and related matters 15 5.5 Selection of tests, test conditions and se
25、verities 15 5.6 Blank detail specification pro-forma for type F-QUICK connector 16 6 Marking . 20 6.1 Marking of component . 20 6.2 Marking and contents of package 20 Figure 1 Connector “F-Quick” type male plug: general dimensions 7 Figure 2 Example of connector “F-Quick” type male plug with resilie
26、nt outer conductor sleeve (indoor) 8 Figure 3 Example of connector “F-Quick” type male plug with slotted outer conductor (indoor) 8 Figure 4 Example of connector “F-Quick” type male plug with slotted outer conductor and snap ring (indoor) . 9 Figure 5 Mechanical gauge for resilient outer conductor 9
27、 BS EN 61169-47:2015IEC 61169-47:2015 IEC 2015 3 Table 1 Connector “F” type male plug (indoor) 7 Table 2 Ratings and characteristics 10 Table 3 Acceptance tests . 12 Table 4 Periodic tests 13 BS EN 61169-47:2015 4 IEC 61169-47:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO-FREQUENCY
28、 CONNECTORS Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 cable networks (type F-Quick) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national elect
29、rotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specific
30、ations, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Internation
31、al, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal de
32、cisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for int
33、ernational use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In
34、order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be
35、clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certificati
36、on bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, p
37、roperty damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited
38、in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying
39、any or all such patent rights. International Standard IEC 61169-47 has been prepared by subcommittee 46F: R.F. and microwave passive components, of IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories. This second edition cance
40、ls and replaces the first edition published in 2012. It constitutes a technical revision. The main changes are listed below: Subclause 3.2 has been updated to better define gauging. Table 2 has been updated for insertion and removal forces. Clause 4 has been updated to refer to the new edition of IE
41、C 61169-1. BS EN 61169-47:2015IEC 61169-47:2015 IEC 2015 5 The text of this standard is based on the following documents: CDV Report on voting 46F/272/CDV 46F/306/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. T
42、his publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 61169 series, under the general title: Radio-frequency connectors, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged
43、 until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a la
44、ter date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. BS EN 61169-47:2015 6 IEC 61169-47:2
45、015 IEC 2015 RADIO-FREQUENCY CONNECTORS Part 47: Sectional specification for radio-frequency coaxial connectors with clamp coupling, typically for use in 75 cable networks (type F-Quick) 1 Scope This part of IEC 61169, which is a sectional specification (SS), provides information and rules for the p
46、reparation of detail specifications (DS) for RF coaxial connectors with clamp coupling, typically for use in 75 cable networks (type F-Quick). It describes the interface dimensions with gauging information, electrical and mechanical performance including the mandatory tests selected from IEC 61169-1
47、:2013, applicable to all DS relating to type F-Quick connectors. This specification indicates the recommended performance characteristics to be considered when writing a DS and covers test schedules and inspection requirements. NOTE This interface is typically used for indoor connections, which are
48、easily disconnected and reconnected. The typical application is for F-type coaxial receiver leads or F-type coaxial patch cables. The interface may also be known as a Push-on connector. It is preferred to use the fixed (screwed) connectors type F according to IEC 61169-24:2009. 2 Normative reference
49、s The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61169-1:2013, Radio-frequency connectors Part 1: Generic specification General requirements and measuring methods IEC 61169-24:2009, Radio-frequency connectors
