1、BSI Standards PublicationIndustrial communication networks ProfilesPart 5-11: Installation of fieldbuses Installation profiles for CPF 11BS EN 61784-5-11:2013National forewordThis British Standard is the UK implementation of EN 61784-5-11:2013. It isidentical to IEC 61784-5-11:2013. It supersedes BS
2、 EN 61784-5-11:2012which is withdrawn.The UK participation in its preparation was entrusted to Technical Com-mittee AMT/7, Industrial communications: process measurement andcontrol, including fieldbus.A list of organizations represented on this committee can be obtained onrequest to its secretary.Th
3、is publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 84198 9ICS 25.040.40; 35.100.40Compliance with a British Standard cann
4、ot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61784-5-11:2013EUROPEAN STANDARD EN 61784-5-11 NORME
5、 EUROPENNE EUROPISCHE NORM December 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of ex
6、ploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61784-5-11:2013 E ICS 25.040.40; 35.100.40 Supersedes EN 61784-5-11:2012 English version Industrial communication networks - Profiles - Part 5-11: Installation of fieldbuses - Installation profiles for CPF 11
7、 (IEC 61784-5-11:2013) Rseaux de communication industriels - Profils - Partie 5-11: Installation des bus de terrain - Profils dinstallation pour CPF 11 (CEI 61784-5-11:2013) Industrielle Kommunikationsnetze - Profile - Teil 5-11: Feldbusinstallation - Installationsprofile fr die Kommunikationsprofil
8、familie 11 (IEC 61784-5-11:2013) This European Standard was approved by CENELEC on 2013-10-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-t
9、o-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by tra
10、nslation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
11、 Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN
12、 61784-5-11:2013EN 61784-5-11:2013 - 2 - Foreword The text of document 65C/738/FDIS, future edition 3 of IEC 61784-5-11, prepared by SC 65C “Industrial networks“ of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENEL
13、EC as EN 61784-5-11:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-07-22 latest date by which the national standards conflicting with the document have to be
14、withdrawn (dow) 2016-10-22 This document supersedes EN 61784-5-11:2012. EN 61784-5-11:2013 includes the following significant technical changes with respect to EN 61784-5-11:2012: addition of a new Annex C (normative). This standard is to be used in conjunction with EN 61918:2013. Attention is drawn
15、 to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61784-5-11:2013 was approved by CENELEC as
16、 a European Standard without any modification. BS EN 61784-5-11:2013- 3 - EN 61784-5-11:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this documen
17、t and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by
18、(mod), the relevant EN/HD applies. Annex ZA of EN 61918:2013 applies, except as follows: Publication Year Title EN/HD Year Addition to Annex ZA of EN 61918:2013: IEC 61918 2013 Industrial communication networks - Installation of communication networks in industrial premises EN 61918 2013 BS EN 61784
19、-5-11:2013 2 61784-5-11 IEC:2013 CONTENTS INTRODUCTION . 10 1 Scope . 11 2 Normative references . 11 3 Terms, definitions and abbreviated terms . 11 4 CPF 11: Overview of installation profiles 11 5 Installation profile conventions . 11 6 Conformance to installation profiles 12 Annex A (normative) CP
20、 11/1 (TCnet-star) specific installation profile 14 A.1 Installation profile scope . 14 A.2 Normative references . 14 A.3 Installation profile terms, definitions, and abbreviated terms . 14 A.4 Installation planning . 14 A.4.1 General . 14 A.4.2 Planning requirements . 14 A.4.2.1 Safety 14 A.4.2.2 S
21、ecurity . 14 A.4.2.3 Environmental considerations and EMC . 14 A.4.2.4 Specific requirements for generic cabling in accordance with ISO/IEC 24702 14 A.4.3 Network capabilities 14 A.4.3.1 Network topology . 14 A.4.3.2 Network characteristics . 15 A.4.4 Selection and use of cabling components 17 A.4.4
22、.1 Cable selection . 17 A.4.4.2 Connecting hardware selection . 18 A.4.4.3 Connections within a channel/permanent link 20 A.4.4.4 Terminators 20 A.4.4.5 Device location and connection . 20 A.4.4.6 Coding and labelling . 20 A.4.4.7 Earthing and bonding of equipment and devices and shielded cabling 20
23、 A.4.4.8 Storage and transportation of cables . 20 A.4.4.9 Routing of cables 20 A.4.4.10 Separation of circuit 20 A.4.4.11 Mechanical protection of cabling components . 21 A.4.4.12 Installation in special areas . 21 A.4.5 Cabling planning documentation 21 A.4.6 Verification of cabling planning speci
24、fication . 21 A.5 Installation implementation . 21 A.5.1 General requirements 21 A.5.2 Cable installation . 21 A.5.2.1 General requirements for all cabling types . 21 A.5.2.2 Installation and routing 22 A.5.2.3 Specific requirements for CPs . 22 BS EN 61784-5-11:201361784-5-11 IEC:2013 3 A.5.2.4 Spe
25、cific requirements for wireless installation 22 A.5.2.5 Specific requirements for generic cabling in accordance with ISO/IEC 24702 22 A.5.3 Connector installation 22 A.5.4 Terminator installation . 22 A.5.5 Device installation . 22 A.5.6 Coding and labelling 22 A.5.7 Earthing and bonding of equipmen
26、t and devices and shield cabling . 22 A.5.8 As-implemented cabling documentation . 22 A.6 Installation verification and installation acceptance test 22 A.6.1 General . 22 A.6.2 Installation verification . 22 A.6.2.1 General . 22 A.6.2.2 Verification according to cabling planning documentation 22 A.6
27、.2.3 Verification of earthing and bonding 22 A.6.2.4 Verification of shield earthing 22 A.6.2.5 Verification of cabling system 22 A.6.2.6 Cable selection verification . 22 A.6.2.7 Connector verification . 23 A.6.2.8 Connection verification 23 A.6.2.9 Terminators verification . 23 A.6.2.10 Coding and
28、 labelling verification . 23 A.6.2.11 Verification report . 23 A.6.3 Installation acceptance test . 23 A.6.3.1 General . 23 A.6.3.2 Acceptance test of Ethernet-based cabling 23 A.6.3.3 Acceptance test of non-Ethernet-based cabling . 23 A.6.3.4 Specific requirements for wireless installation 23 A.6.3
29、.5 Acceptance test report . 23 A.7 Installation administration . 23 A.8 Installation maintenance and installation troubleshooting . 23 Annex B (normative) CP 11/2 (TCnet-loop 100) specific installation profile 24 B.1 Installation profile scope . 24 B.2 Normative references . 24 B.3 Installation prof
30、ile terms, definitions, and abbreviated terms . 24 B.4 Installation planning . 24 B.4.1 General . 24 B.4.2 Planning requirements . 24 B.4.2.1 Safety 24 B.4.2.2 Security . 24 B.4.2.3 Environmental considerations and EMC . 24 B.4.2.4 Specific requirements for generic cabling in accordance with ISO/IEC
31、 24702 24 B.4.3 Network capabilities 24 B.4.3.1 Network topology . 24 B.4.3.2 Network characteristics . 24 B.4.4 Selection and use of cabling components 27 B.4.4.1 Cable selection . 27 BS EN 61784-5-11:2013 4 61784-5-11 IEC:2013 B.4.4.2 Connecting hardware selection . 28 B.4.4.3 Connections within a
32、 channel/permanent link 30 B.4.4.4 Terminators 30 B.4.4.5 Device location and connection . 30 B.4.4.6 Coding and labelling . 30 B.4.4.7 Earthing and bonding of equipment and devices and shielded cabling 30 B.4.4.8 Storage and transportation of cables . 30 B.4.4.9 Routing of cables 30 B.4.4.10 Separa
33、tion of circuit 30 B.4.4.11 Mechanical protection of cabling components . 31 B.4.4.12 Installation in special areas . 31 B.4.5 Cabling planning documentation 31 B.4.6 Verification of cabling planning specification . 31 B.5 Installation implementation . 31 B.5.1 General requirements 31 B.5.2 Cable in
34、stallation . 31 B.5.2.1 General requirements for all cabling types . 31 B.5.2.2 Installation and routing 32 B.5.2.3 Specific requirements for CPs . 32 B.5.2.4 Specific requirements for wireless installation 32 B.5.2.5 Specific requirements for generic cabling in accordance with ISO/IEC 24702 32 B.5.
35、3 Connector installation 32 B.5.4 Terminator installation . 32 B.5.5 Device installation . 32 B.5.6 Coding and labelling 32 B.5.7 Earthing and bonding of equipment and devices and shield cabling . 32 B.5.8 As-implemented cabling documentation . 33 B.6 Installation verification and installation accep
36、tance test 33 B.6.1 General . 33 B.6.2 Installation verification . 33 B.6.2.1 General . 33 B.6.2.2 Verification according to cabling planning documentation 33 B.6.2.3 Verification of earthing and bonding 33 B.6.2.4 Verification of shield earthing 33 B.6.2.5 Verification of cabling system 33 B.6.2.6
37、Cable selection verification . 33 B.6.2.7 Connector verification . 33 B.6.2.8 Connection verification 33 B.6.2.9 Terminators verification . 33 B.6.2.10 Coding and labelling verification . 33 B.6.2.11 Verification report . 33 B.6.3 Installation acceptance test . 33 B.6.3.1 General . 33 B.6.3.2 Accept
38、ance test of Ethernet-based cabling 33 B.6.3.3 Acceptance test of non-Ethernet-based cabling . 33 B.6.3.4 Specific requirements for wireless installation 33 B.6.3.5 Acceptance test report . 34 BS EN 61784-5-11:201361784-5-11 IEC:2013 5 B.7 Installation administration . 34 B.8 Installation maintenanc
39、e and installation troubleshooting . 34 Annex C (normative) CP 11/3 (TCnet-loop 1G) specific installation profile . 35 C.1 Installation profile scope . 35 C.2 Normative references . 35 C.3 Installation profile terms, definitions, and abbreviated terms . 35 C.4 Installation planning . 35 C.4.1 Genera
40、l . 35 C.4.2 Planning requirements . 35 C.4.2.1 Safety 35 C.4.2.2 Security . 35 C.4.2.3 Environmental considerations and EMC . 35 C.4.2.4 Specific requirements for generic cabling in accordance with ISO/IEC 24702 35 C.4.3 Network capabilities 35 C.4.3.1 Network topology . 35 C.4.3.2 Network characte
41、ristics . 35 C.4.4 Selection and use of cabling components 37 C.4.4.1 Cable selection . 37 C.4.4.2 Connecting hardware selection . 37 C.4.4.3 Connections within a channel/permanent link 38 C.4.4.4 Terminators 38 C.4.4.5 Device location and connection . 39 C.4.4.6 Coding and labelling . 39 C.4.4.7 Ea
42、rthing and bonding of equipment and devices and shielded cabling 39 C.4.4.8 Storage and transportation of cables . 39 C.4.4.9 Routing of cables 39 C.4.4.10 Separation of circuit 39 C.4.4.11 Mechanical protection of cabling components . 39 C.4.4.12 Installation in special areas . 39 C.4.5 Cabling pla
43、nning documentation 39 C.4.6 Verification of cabling planning specification . 39 C.5 Installation implementation . 40 C.5.1 General requirements 40 C.5.2 Cable installation . 40 C.5.2.1 General requirements for all cabling types . 40 C.5.2.2 Installation and routing 40 C.5.2.3 Specific requirements
44、for CPs . 40 C.5.2.4 Specific requirements for wireless installation 40 C.5.2.5 Specific requirements for generic cabling in accordance with ISO/IEC 24702 40 C.5.3 Connector installation 40 C.5.4 Terminator installation . 40 C.5.5 Device installation . 40 C.5.6 Coding and labelling 40 C.5.7 Earthing
45、 and bonding of equipment and devices and shield cabling . 40 C.5.8 As-implemented cabling documentation . 41 BS EN 61784-5-11:2013 6 61784-5-11 IEC:2013 C.6 Installation verification and installation acceptance test 41 C.6.1 General . 41 C.6.2 Installation verification . 41 C.6.2.1 General . 41 C.6
46、.2.2 Verification according to cabling planning documentation 41 C.6.2.3 Verification of earthing and bonding 41 C.6.2.4 Verification of shield earthing 41 C.6.2.5 Verification of cabling system 41 C.6.2.6 Cable selection verification . 41 C.6.2.7 Connector verification . 41 C.6.2.8 Connection verif
47、ication 41 C.6.2.9 Terminators verification . 41 C.6.2.10 Coding and labelling verification . 41 C.6.2.11 Verification report . 41 C.6.3 Installation acceptance test . 41 C.6.3.1 General . 41 C.6.3.2 Acceptance test of Ethernet-based cabling 41 C.6.3.3 Acceptance test of non-Ethernet-based cabling .
48、 41 C.6.3.4 Specific requirements for wireless installation 41 C.6.3.5 Acceptance test report . 42 C.7 Installation administration . 42 C.8 Installation maintenance and installation troubleshooting . 42 Figure 1 Standards relationships 10 Table A.1 Network characteristics for balanced cabling based
49、on Ethernet 15 Table A.2 Network characteristics for optical fibre cabling 16 Table A.3 Information relevant to copper cable: fixed cables 17 Table A.4 Information relevant to copper cable: cords 17 Table A.5 Information relevant to optical fibre cables . 18 Table A.6 Connectors for balanced cabling CPs based on Ethernet . 19 Table A.7 Optical fibre connecting hardware 19 Table A.8 Relationship between FOC and fibre types (CP 11/1) . 19 Table A.9 Recommended minimum distances specific for CP 11/1 . 20 Table A.10
