1、BSI Standards PublicationIndustrial communication networks Installation of communication networks in industrial premisesBS EN 61918:2013Incorporating corrigendum May 2014BS EN 61918:2013National forewordThis British Standard is the UK implementation of EN 61918:2013, incorporating corrigendum May 20
2、14. It is derived from IEC 61918:2013. It supersedes BS EN 61918:2008, which is withdrawn.CENELEC corrigendum May 2014 corrects the EN Foreword and Introduction.The CENELEC common modifications have been implemented at the appropriate places in the text and are indicated by tags .The UK participatio
3、n in its preparation was entrusted to Technical Committee AMT/7, Industrial communications: process measurement and control, including fieldbus.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the neces
4、sary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 77747 9ICS 25.040.40; 33.180.10; 35.110Compliance with a British Standard cannot confer immunity fromlegal obligations.This
5、British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 September 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDEUROPEAN STANDARD EN 61918 NORME EUROPENNE EUROPISCHE NORM December 2013 CENELEC European Committee f
6、or Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELE
7、C members. Ref. No. EN 61918:2013 E ICS 25.040.40; 33.020; 35.240.50 English version Industrial communication networks - Installation of communication networks in industrial premises (IEC 61918:2013, modified) Rseaux de communication industriels - Installation de rseaux de communication dans des loc
8、aux industriels (CEI 61918:2013, modifie) Industrielle Kommunikationsnetze Installation von Kommunikationsnetzen in Industrieanlagen (IEC 61918:2013, modifiziert) This European Standard was approved by CENELEC on 2013-10-02. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulatio
9、ns which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC membe
10、r. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions
11、. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Ne
12、therlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Incorporating corrigendum May 2014EN 61918:2013 2 Foreword The text of document 65C/737/FDIS, future edition 3 of IEC 61918, prepared by SC 65C, “Industrial networks“, of IEC/
13、TC 65, “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61918:2013. A draft amendment, which covers common modifications to IEC 61918:2013, was prepared by CLC/TC 65X “Industrial-process measurement, control and aut
14、omation“ and approved by CENELEC. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-10-02 latest date by which the national standards conflicting with this document h
15、ave to be withdrawn (dow) 2016-10-02 This document supersedes EN 61918:2008. EN 61918:2013 includes the following significant technical changes with respect to EN 61918:2008: some terms and abbreviated terms have been added to Clause 3; Subclauses 4.4.3.4.1, 4.4.7.2.1, and 4.4.7.3 have been updated;
16、 Subclause 5.7.4.3 has been updated as result of the revision of the installation profiles; Subclause 6.2.3.1 has been updated; Subclause 8.1 has been updated; Figure 2, Figure 13, Figure 15, Figure 29, Figure H.1, Table 3, Table 6, Table 7, Table 14, Table B.3 and Table B.5 have been updated; a new
17、 Figure 35 has been added; a new Table 10 has been added; Annex D and Annex M have been extended to cover additional communication profile families; Annex F has been extended to cover conductor sizes in electrical cables; Annex H has been made normative; some common requirements are extended as resu
18、lt of the revision of the installation profiles; a new informative Annex O has been added. This standard is to be used in conjunction with the EN 61784-5 series with regard to the installation of Attention is drawn to the possibility that some of the elements of this document may be the subject of p
19、atent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. BS EN 61918:2013communication profi les (CPs). This standard is to be used in conjunction with 50174 series, in particular with EN 50174-2, with regard to the installation of generic cabling
20、. 3 EN 61918:2013 Endorsement notice The text of the International Standard IEC 61918:2013 was approved by CENELEC as a European Standard with common modifications. BS EN 61918:2013EN 61918:2013 4 BS EN 61918:2013 5 EN 61918:2013 Annex ZA (normative) Normative references to international publication
21、s with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced doc
22、ument (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year - - Multi-element metallic cables used in analogue and digital communication and control EN 50
23、288 Series - - Application of equipotential bonding and earthing in buildings with information technology equipment EN 50310 - IEC 60364-1 (mod) + corr. August 2005 2009 Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions HD 60364
24、-1 2008 IEC 60364-4-41 - Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock HD 60364-4-41 - IEC 60364-4-44 - Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic
25、disturbances HD 60364-4-442 - IEC 60364-5-54 - Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors HD 60364-5-54 - IEC 60529 - Degrees of protection provided by enclosures (IP Code) EN 60529 - IEC 60603 Se
26、ries Connectors for frequencies below 3 MHz for use with printed boards EN 60603 Series IEC 60603-7 Series Connectors for electronic equipment - Part 7: Detail specification for 8-way, shielded, free and fixed connectors EN 60603-7 Series IEC 60757 - Code for designation of colours HD 457 S1 - IEC 6
27、0793 Series Optical fibres EN 60793 Series IEC 60793-2-10 - Optical fibres - Part 2-10: Product specifications - Sectional specification for category A1 multimode fibres EN 60793-2-10 - IEC 60794 Series Optical fibre cables EN 60794 Series IEC 60807-2 - Rectangular connectors for frequencies below 3
28、 MHz - Part 2: Detail specification for a range of connectors, with assesed quality, with trapezoidal shaped metal shells and round contacts - Fixed solder contact types - - BS EN 61918:2013EN 61918:2013 6 Publication Year Title EN/HD Year IEC 60807-3 - Rectangular connectors for frequencies below 3
29、 MHz - Part 3: Detail specification for a range of connectors with trapezoidal shaped metal shells and round contacts - Removable crimp types with closed crimp barrels, rear insertion/rear extraction - - IEC 60825-2 - Safety of laser products - Part 2: Safety of optical fibre communication systems (
30、OFCS) EN 60825-2 - IEC 60950-1 - Information technology equipment - Safety - Part 1: General requirements EN 60950-1 - IEC 61076-2-101 - Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors with screw-locking EN 61076-
31、2-101 - IEC/PAS 61076-2-109 - Connectors for electronic equipment - Product requirements - Part 2-109: Circular connectors - Detail specification for connectors M12 x 1 with screw-locking, for data transmissions with frequencies up to 500 MHz - - IEC 61076-3-106 - Connectors for electronic equipment
32、 - Product requirements - Part 3-106: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface EN 61076-3-106 - IEC 61076-3-117 - Connectors for electronic eq
33、uipment - Product requirements - Part 3-117: Rectangular connectors - Detail specification for protective housings for use with 8-way shielded and unshielded connectors for industrial environments incorporating the IEC 60603-7 series interface - Variant 14 related to IEC 61076-3-106 - Push pull coup
34、ling EN 61076-3-117 - IEC 61158 Series Industrial communication networks - Fieldbus specifications EN 61158 Series IEC 61158-2 201X1)Industrial communication networks - Fieldbus specifications - Part 2: Physical layer specification and service definition EN 61158-2 201X1)IEC 61169-8 - Radio-frequenc
35、y connectors - Part 8: Sectional specification - RF coaxial connectors with inner diameter of outer conductor 6,5 mm (0,256 in) with bayonet lock - Characteristics impedance 50 ohms (type BNC) EN 61169-8 - IEC 61753 Series Fibre optic interconnecting devices and passive components performance standa
36、rd EN 61753 Series 1)To be published. BS EN 61918:2013 7 EN 61918:2013 Publication Year Title EN/HD Year IEC 61754-2 - Fibre optic connector interfaces - Part 2: Type BFOC/2,5 connector family EN 61754-2 - IEC 61754-4 - Fibre optic interconnecting devices and passive components - Fibre optic connect
37、or interfaces - Part 4: Type SC connector family EN 61754-4 - IEC 61754-20 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 20: Type LC connector family EN 61754-20 - IEC 61754-22 - Fibre optic connector interfaces - Part 22: Type F-SMA connector
38、 family EN 61754-22 - IEC 61754-24 - Fibre optic interconnecting devices and passive components - Fibre optic connector interfaces - Part 24: Type SC-RJ connector family EN 61754-24 - IEC 61784 Series Industrial communication networks - Profiles EN 61784 Series IEC 61784-1 - Industrial communication
39、 networks - Profiles - Part 1: Fieldbus profiles EN 61784-1 - IEC 61784-2 201X1)Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 EN 61784-2 201X1)IEC 61784-3 - Industrial communication networks - Profiles - Part 3: Fun
40、ctional safety fieldbuses - General rules and profile definitions EN 61784-3 - IEC 61784-5 Series Industrial communication networks - Profiles - Part 5-2: Installation of fieldbuses - Installation profiles for CPF 2 EN 61784-5 Series IEC 61935-1 (mod) + corr. October 2009 2010 Specification for the
41、testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in ISO/IEC 11801 and related standards EN 61935-1 2009 IEC 61935-2 - Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in I
42、SO/IEC 11801 and related standards EN 61935-2 - IEC 62026-3 - Low-voltage switchgear and controlgear - Controller-device interfaces (CDIs) - Part 3: DeviceNet EN 62026-3 - IEC 62439 Series Industrial communication networks - High availability automation networks EN 62439 Series IEC 62443 Series Indu
43、strial communication networks - Network and system security - - ISO/IEC 8802-3 - Information technology - Telecommunications and information exchange between systems - Local and metropolitan area networks - Specific requirements - Part 3: Carrier sense multiple access with collision detection (CSMA/
44、CD) access method and physical layer specifications - - ISO/IEC 11801 + corr. October + corr. December + A1 + A2 2002 2002 2002 2008 2010 Information technology - Generic cabling for customer premises - - BS EN 61918:2013EN 61918:2013 8 Publication Year Title EN/HD Year ISO/IEC 14763-2 2012 Informat
45、ion technology - Implementation and operation of customer premises cabling - Part 2: Planning and installation - - ISO/IEC 14763-3 - Information technology - Implementation and operation of customer premises cabling - Part 3: Testing of optical fibre cabling - - ISO/IEC 24702 +A1 2006 2009 Informati
46、on technology - Generic cabling - Industrial premises - - IEEE 802.3 - Standard for Information Technology Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSMA
47、/CD) Access Method and Physical Layer Specifications - - IEEE 802.3at - Standard for Information Technology Telecommunications and Information Exchange Between Systems - Local and Metropolitan Area Networks - Specific Requirements - Part 3: Carrier Sense Multiple Access with Collision Detection (CSM
48、A/CD) Access Method and Physical Layer Specifications - Amendment 3: Data Terminal Equipment (DTE) Power Via the Media Dependent Interface (MDI) Enhancements - - ANSI/NFPA T3.5.29 R1 2007 Fluid power systems and components - Electrically-controlled industrial valves - Interface dimensions for electr
49、ical connectors - - BS EN 61918:2013 2 61918 IEC:2013 CONTENTS INTRODUCTION . 12 1 Scope . 15 2 Normative references . 15 3 Terms, definitions, and abbreviated terms 18 3.1 Terms and definitions 18 3.2 Abbreviated terms . 28 3.3 Conventions for installation profiles . 30 4 Installation planning . 30 4.1 General . 30 4.1.1 Objective . 30 4.1.2 Cabling in industrial premises 30 4.1.3 The planning process 33 4.1.4 Specific requirements for CPs . 34 4.1.5 Specific requirements for generic cabling in accordance with
