1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Electricity metering data exchange - The DLMS/COSEM suitePart 6-1: Object Identification System (OBIS)BS EN 62056-6-1:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62056-6-1 December 2017 ICS 35.110; 17.220;
2、91.140.50 Supersedes EN 62056-6-1:2016 English Version Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS) (IEC 62056-6-1:2017) change des donnes de comptage de llectricit - La suite DLMS/COSEM - Partie 6-1: Systme didentification des objets (OBI
3、S) (IEC 62056-6-1:2017) Datenkommunikation der elektrischen Energiemessung - DLMS/COSEM - Teil 6-1: COSEM Object Identification System (OBIS) (IEC 62056-6-1:2017) This European Standard was approved by CENELEC on 2017-09-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulatio
4、ns which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC membe
5、r. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions
6、. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Ne
7、therlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Ma
8、nagement Centre: Rue de la Science 23, B-1040 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62056-6-1:2017 E National forewordThis British Standard is the UK implementation of EN 6205661:2017. It is identical to IEC
9、6205661:2017. It supersedes BS EN 6205661:2016, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PEL/13, Electricity Meters.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purpo
10、rt to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 94306 5ICS 91.140.50; 17.220.01; 35.110Compliance with a British Standard cannot confer immunity f
11、rom legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 6205661:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 6205
12、6-6-1 December 2017 ICS 35.110; 17.220; 91.140.50 Supersedes EN 62056-6-1:2016 English Version Electricity metering data exchange - The DLMS/COSEM suite - Part 6-1: Object Identification System (OBIS) (IEC 62056-6-1:2017) change des donnes de comptage de llectricit - La suite DLMS/COSEM - Partie 6-1
13、: Systme didentification des objets (OBIS) (IEC 62056-6-1:2017) Datenkommunikation der elektrischen Energiemessung - DLMS/COSEM - Teil 6-1: COSEM Object Identification System (OBIS) (IEC 62056-6-1:2017) This European Standard was approved by CENELEC on 2017-09-13. CENELEC members are bound to comply
14、 with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC M
15、anagement Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has
16、the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latv
17、ia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr
18、Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62056-6-1:2017 E BS EN 6205661:2017EN 62056-6-1:2017 (E) 2 European foreword The tex
19、t of document 13/1745/FDIS, future edition 3 of IEC 62056-6-1, prepared by IEC/TC 13 “Electrical energy measurement and control“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62056-6-1:2017. The following dates are fixed: latest date by which the document has to be imp
20、lemented at national level by publication of an identical national standard or by endorsement (dop) 2018-06-13 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-09-13 This document supersedes EN 62056-6-1:2016. Attention is drawn to the possibi
21、lity that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Associatio
22、n. Endorsement notice The text of the International Standard IEC 62056-6-1:2017 was approved by CENELEC as a European Standard without any modification. BS EN 6205661:2017EN 62056-6-1:2017 (E) 3 Annex ZA (normative) Normative references to international publications with their corresponding European
23、 publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) ap
24、plies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/H
25、D Year IEC 62053-23 2003 Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) EN 62053-23 2003 IEC 62056-6-2 2017 Electricity metering data exchange - The DLMS/COSEM suite - Part 6-2: COSEM interface classes EN 62056-6-2 1)- I
26、EC 62056-21 2002 Electricity metering - Data exchange for meter reading, tariff and load control - Part 21: Direct local data exchange EN 62056-21 2002 IEC/TR 61000-2-8 2002 Electromagnetic compatibility (EMC) - Part 2-8: Environment - Voltage dips and short interruptions on public electric power su
27、pply systems with statistical measurement results - - IEC/TR 62051 1999 Electricity metering - Glossary of terms - - IEC/TR 62051-1 2004 Electricity metering - Data exchange for meter reading, tariff and load control - Glossary of terms - Part 1: Terms related to data exchange with metering equipmen
28、t using DLMS/COSEM - - 1)Atdraft stage. BS EN 6205661:2017This page deliberately left blank 2 IEC 62056-6-1:2017 IEC 2017 CONTENTS FOREWORD . 5 INTRODUCTION . 7 1 Scope 8 2 Normative references 8 3 Terms, definitions and abbreviated terms 9 3.1 Terms and definitions 9 3.2 Abbreviated terms . 9 4 OBI
29、S code structure 9 4.1 Value groups and their use . 9 4.2 Manufacturer specific codes 10 4.3 Reserved ranges . 10 4.4 Summary of rules for manufacturer, utility, consortia and country specific codes 10 4.5 Standard object codes 11 5 Value group definitions overview 12 5.1 Value group A . 12 5.2 Valu
30、e group B . 12 5.3 Value group C . 12 5.3.1 General . 12 5.3.2 Abstract objects . 13 5.4 Value group D . 13 5.4.1 General . 13 5.4.2 Consortia specific identifiers 13 5.4.3 Country specific identifiers . 14 5.4.4 Identification of general and service entry objects 15 5.5 Value group E . 15 5.6 Value
31、 group F . 16 5.6.1 General . 16 5.6.2 Identification of billing periods . 16 6 Abstract objects (Value group A = 0) . 16 6.1 General and service entry objects Abstract 16 6.2 Error registers, alarm registers / filters / descriptor objects Abstract . 20 6.3 List objects Abstract . 21 6.4 Register ta
32、ble objects Abstract . 21 6.5 Data profile objects Abstract 21 7 Electricity (Value group A = 1) . 22 7.1 Value group C codes Electricity . 22 7.2 Value group D codes Electricity . 24 7.2.1 Processing of measurement values . 24 7.2.2 Use of value group D for identification of other objects 27 7.3 Va
33、lue group E codes Electricity 27 7.3.1 General . 27 7.3.2 Tariff rates . 27 7.3.3 Harmonics . 28 7.3.4 Phase angles . 28 7.3.5 Transformer and line loss quantities 29 2 IEC 62056-6-1:2017 IEC 2017 CONTENTS FOREWORD . 5 INTRODUCTION . 7 1 Scope 8 2 Normative references 8 3 Terms, definitions and abbr
34、eviated terms 9 3.1 Terms and definitions 9 3.2 Abbreviated terms . 9 4 OBIS code structure 9 4.1 Value groups and their use . 9 4.2 Manufacturer specific codes 10 4.3 Reserved ranges . 10 4.4 Summary of rules for manufacturer, utility, consortia and country specific codes 10 4.5 Standard object cod
35、es 11 5 Value group definitions overview 12 5.1 Value group A . 12 5.2 Value group B . 12 5.3 Value group C . 12 5.3.1 General . 12 5.3.2 Abstract objects . 13 5.4 Value group D . 13 5.4.1 General . 13 5.4.2 Consortia specific identifiers 13 5.4.3 Country specific identifiers . 14 5.4.4 Identificati
36、on of general and service entry objects 15 5.5 Value group E . 15 5.6 Value group F . 16 5.6.1 General . 16 5.6.2 Identification of billing periods . 16 6 Abstract objects (Value group A = 0) . 16 6.1 General and service entry objects Abstract 16 6.2 Error registers, alarm registers / filters / desc
37、riptor objects Abstract . 20 6.3 List objects Abstract . 21 6.4 Register table objects Abstract . 21 6.5 Data profile objects Abstract 21 7 Electricity (Value group A = 1) . 22 7.1 Value group C codes Electricity . 22 7.2 Value group D codes Electricity . 24 7.2.1 Processing of measurement values .
38、24 7.2.2 Use of value group D for identification of other objects 27 7.3 Value group E codes Electricity 27 7.3.1 General . 27 7.3.2 Tariff rates . 27 7.3.3 Harmonics . 28 7.3.4 Phase angles . 28 7.3.5 Transformer and line loss quantities 29 BS EN 6205661:2017IEC 62056-6-1:2017 IEC 2017 3 7.3.6 UNIP
39、EDE voltage dips . 32 7.3.7 Use of value group E for the identification of other objects. 32 7.4 Value group F codes Electricity 32 7.4.1 Billing periods 32 7.4.2 Multiple thresholds 33 7.5 OBIS codes Electricity . 33 7.5.1 General and service entry objects Electricity . 33 7.5.2 Error register obje
40、cts Electricity 37 7.5.3 List objects Electricity . 37 7.5.4 Data profile objects Electricity . 37 7.5.5 Register table objects Electricity . 38 8 Other media (Value group A = 15) . 38 8.1 General . 38 8.2 Value group C codes Other media 38 8.3 Value group D codes Other media 39 8.4 Value group E co
41、des Other media 39 8.5 Value group F codes Other media 39 Annex A (normative) Code presentation . 40 A.1 Reduced ID codes (e.g. for IEC 62056-21) 40 A.2 Display . 40 A.3 Special handling of value group F . 41 A.4 COSEM. 42 Annex B (informative) Significant technical changes with respect to IEC 62056
42、-6-1:2015 43 Bibliography 44 Index 45 Figure 1 Quadrant definitions for active and reactive power . 24 Figure 2 Model of the line and the transformer for calculation of loss quantities . 29 Figure A.1 Reduced ID code presentation 40 Table 1 OBIS code structure and use of value groups 10 Table 2 Rule
43、s for manufacturer, utility, consortia and country specific codes . 11 Table 3 Value group A codes . 12 Table 4 Value group B codes . 12 Table 5 Value group C codes Abstract objects 13 Table 6 Value group D codes Consortia specific identifiers . 14 Table 7 Value group D codes Country specific identi
44、fiers 14 Table 8 OBIS codes for general and service entry objects . 16 Table 9 OBIS codes for error registers, alarm registers and alarm filters Abstract . 21 Table 10 OBIS codes for list objects Abstract 21 Table 11 OBIS codes for Register table objects Abstract 21 Table 12 OBIS codes for data prof
45、ile objects Abstract . 22 Table 13 Value group C codes Electricity 23 Table 14 Value group D codes Electricity 25 Table 15 Value group E codes Electricity Tariff rates . 28 BS EN 6205661:2017 4 IEC 62056-6-1:2017 IEC 2017 Table 16 Value group E codes Electricity Harmonics 28 Table 17 Value group E c
46、odes Electricity Extended phase angle measurement 29 Table 18 Value group E codes Electricity Transformer and line losses . 30 Table 19 Value group E codes Electricity UNIPEDE voltage dips . 32 Table 20 OBIS codes for general and service entry objects Electricity 34 Table 21 OBIS codes for error reg
47、ister objects Electricity 37 Table 22 OBIS codes for list objects Electricity . 37 Table 23 OBIS codes for data profile objects Electricity 38 Table 24 OBIS codes for register table objects Electricity . 38 Table 25 Value group C codes Other media 39 Table A.1 Example of display code replacement 40
48、Table A.2 Value group F Billing periods 41 BS EN 6205661:2017IEC 62056-6-1:2017 IEC 2017 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRICITY METERING DATA EXCHANGE THE DLMS/COSEM SUITE Part 6-1: Object Identification System (OBIS) FOREWORD 1) The International Electrotechnical Commission (IEC)
49、 is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, I
