1、BSI Standards PublicationHigh-voltage switchgear and controlgearPart 3: Digital interfaces based on IEC 61850BS EN 62271-3:2015National forewordThis British Standard is the UK implementation of EN 62271-3:2015. It is identical to IEC 62271-3:2015. It supersedes BS EN 62271-3:2006 which is withdrawn.
2、The UK participation in its preparation was entrusted by TechnicalCommittee PEL/17, Switchgear, controlgear, and HV-LV co-ordination, toSubcommittee PEL/17/1, High-voltage switchgear and controlgear.A list of organizations represented on this committee can be obtained onrequest to its secretary.This
3、 publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 79342 4ICS 29.130.10Compliance with a British Standard cannot confer imm
4、unity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 May 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62271-3:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 6227
5、1-3 May 2015 ICS 29.130.10 Supersedes EN 62271-3:2006 English Version High-voltage switchgear and controlgear - Part 3: Digital interfaces based on IEC 61850 (IEC 62271-3:2015) Appareillage haute tension - Partie 3: Interfaces numriques bases sur lIEC 61850 (IEC 62271-3:2015) Hochspannungs-Schaltger
6、te und -Schaltanlagen - Teil 3: Digitale Schnittstellen nach IEC 61850 (IEC 62271-3:2015) This European Standard was approved by CENELEC on 2015-04-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the s
7、tatus of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, Fre
8、nch, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria
9、, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
10、Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exp
11、loitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62271-3:2015 E BS EN 62271-3:2015EN 62271-3:2015 - 2 - Foreword The text of document 17C/617/FDIS, future edition 2 of IEC 62271-3, prepared by SC 17C “High-voltage switchgear and controlgear assemblies“ of IE
12、C/TC 17 “Switchgear and controlgear“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62271-3:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement
13、(dop) 2016-01-14 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-04-14 This document supersedes EN 62271-3:2006. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and
14、/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62271-3:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have
15、 to be added for the standards indicated: IEC 60265 Series NOTE Harmonized as EN 60265 Series 1). IEC 60794 Series NOTE Harmonized as EN 60794 Series. IEC 61754-20:2012 NOTE Harmonized as EN 61754-20:2012 (not modified). IEC 61850-6:2009 NOTE Harmonized as EN 61850-6:2010 (not modified). IEC 61850-7
16、-1:2011 NOTE Harmonized as EN 61850-7-1:2011 (not modified). IEC 61850-7-410:2012 NOTE Harmonized as EN 61850-7-410:2013 (not modified). IEC 61850-7-420:2009 NOTE Harmonized as EN 61850-7-420:2009 (not modified). IEC 61869-9 2)NOTE Harmonized as EN 61869-9 2)(not modified). IEC 62271-102:2001 NOTE H
17、armonized as EN 62271-102:2002 (not modified). IEC 62271-102:2001/A1:2011 NOTE Harmonized as EN 62271-102:2002/A1:2011 (not modified). IEC 62271-102:2001/A2:2013 NOTE Harmonized as EN 62271-102:2002/ A2:2013 (not modified). IEC 62271-103 NOTE Harmonized as EN 62271-103. IEC 62271-104 NOTE Harmonized
18、 as EN 62271-104. IEC 62271-202 NOTE Harmonized as EN 62271-202. ISO/IEC 7498-1:1994 NOTE Harmonized as EN ISO/IEC 7498-1:1994 3)(not modified). 1)Superseded by EN 62271 Series. 2)At draft stage. 3)Withdrawn publication. BS EN 62271-3:2015- 3 - EN 62271-3:2015 Annex ZA (normative) Normative referenc
19、es to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the lates
20、t edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this a
21、nnex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 60870-4 1990 Telecontrol equipment and systems - Part 4: Performance requirements HD 546.4 S1 1992 IEC 61850-3 2013 Communication networks and systems for power utility automation - Part 3: General requirements EN 61850-3 2
22、014 IEC 61850-4 2011 Communication networks and systems for power utility automation - Part 4: System and project management EN 61850-4 2011 IEC 61850-5 2013 Communication networks and systems for power utility automation - Part 5: Communication requirements for functions and device models EN 61850-
23、5 2013 IEC 61850-7-2 2010 Communication networks and systems for power utility automation - Part 7-2: Basic information and communication structure - Abstract communication service interface (ACSI) EN 61850-7-2 2010 IEC 61850-7-3 2010 Communication networks and systems for power utility automation -
24、 Part 7-3: Basic communication structure - Common data classes EN 61850-7-3 2011 IEC 61850-7-4 2010 Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible logical node classes and data object classes EN 61850-7-4 2010 IEC 61850-8-1 2011
25、 Communication networks and systems for power utility automation - Part 8-1: Specific Communication Service Mapping (SCSM) - Mappings to MMS (ISO 9506-1 and ISO 9506-2) and to ISO/IEC 8802-3 EN 61850-8-1 2011 BS EN 62271-3:2015EN 62271-3:2015 - 4 - Publication Year Title EN/HD Year IEC 61850-9-2 201
26、1 Communication networks and systems for power utility automation - Part 9-2: Specific Communication Service Mapping (SCSM) - Sampled values over ISO/IEC 8802-3 EN 61850-9-2 2011 IEC 61850-10 2012 Communication networks and systems for power utility automation - Part 10: Conformance testing EN 61850
27、-10 2013 IEC/TR 61850-90-4 2013 Communication networks and systems for power utility automation - Part 90-4: Network engineering guidelines - - IEC 62271-1 A1 2007 2011 High-voltage switchgear and controlgear - Part 1: Common specifications EN 62271-1 A1 2008 2011 IEC 62271-100 A1 + corr. December 2
28、012 2008 2012 High-voltage switchgear and controlgear - Part 100: Alternating current circuit-breakers EN 62271-100 A1 2009 2012 BS EN 62271-3:2015 2 IEC 62271-3:2015 IEC 2015 CONTENTS FOREWORD . 5 INTRODUCTION . 7 0.1 General . 7 0.2 Position of this standard in relation to the IEC 61850 series 7 1
29、 Scope 8 2 Normative references 8 3 Terms and definitions 9 4 Normal and special service conditions . 13 5 Ratings and classifications 13 5.1 LNs on the process level of a high-voltage substation . 13 5.2 Communication services . 15 5.2.1 Conformance classes 15 5.2.2 ACSI basic conformance statement
30、 . 15 5.2.3 ACSI models conformance statement 16 5.2.4 ACSI service conformance statement 18 5.3 Timing requirements . 19 5.3.1 General . 19 5.3.2 Opening and closing times for circuit-breakers . 21 5.4 Data security. 23 5.5 Data integrity 23 5.6 Performance requirements 23 5.6.1 Performance classes
31、 for reliability . 23 5.6.2 Performance classes for availability . 23 5.6.3 Performance classes for maintainability . 23 5.6.4 Dependability . 23 5.6.5 Maximum expansion of the network . 24 6 Design and construction 24 6.1 General . 24 6.1.1 Typical location of switchgear controllers and communicati
32、on devices . 24 6.1.2 Typical system topology 26 6.1.3 Typical controller system redundancy 30 6.2 Technological boundaries . 30 6.2.1 General . 30 6.2.2 Interface point . 30 6.2.3 Transmission systems . 30 6.2.4 Human machine interface 31 6.3 Mechanical requirements 31 6.3.1 Mechanical stresses 31
33、6.3.2 Degree of protection provided by enclosures . 31 6.3.3 Degree of protection for connectors . 31 6.3.4 Accessibility. 31 6.4 Electrical requirements . 31 6.5 EMC . 31 6.6 Electronic nameplates . 31 7 Type tests . 32 BS EN 62271-3:2015IEC 62271-3:2015 IEC 2015 3 7.1 General . 32 7.2 Switchgear c
34、ommunication interface conformance tests 32 7.3 Time measurement of switchgear 32 7.3.1 Circuit-breakers . 32 7.3.2 Other switchgear . 35 8 Routine tests . 35 8.1 General . 35 8.2 Time measurement on switchgear . 36 9 Information to be given with enquiries, tenders and orders 36 10 Rules for transpo
35、rt, storage, installation, operation and maintenance 36 11 Safety 36 Annex A (normative) Test overview table . 37 Annex B (normative) Electronic nameplates . 38 B.1 General . 38 B.2 Electronic nameplate for circuit breaker 38 B.3 Electronic nameplate for switchgear other than circuit breakers 40 B.4
36、 Presence conditions 41 Annex C (informative) Test procedures Performance type testing . 44 Bibliography 46 Figure 1 Calculation of intelligent switchgear operating times (example 1) . 20 Figure 2 Calculation of intelligent switchgear operating times (example 2) . 20 Figure 3 Opening/closing command
37、 to intelligent switchgear 21 Figure 4 Opening/closing command to switchgear 21 Figure 5 Opening operation of an intelligent circuit-breaker 22 Figure 6 Closing operation of an intelligent circuit-breaker . 23 Figure 7 GIS (example 1) . 24 Figure 8 Secondary system in medium voltage cubicle (example
38、 2) . 25 Figure 9 AIS circuit-breaker (example 3) 26 Figure 10 AIS circuit-breaker (example 4) 26 Figure 11 GIS (example 1) with serial communication network . 27 Figure 12 GIS (example 2) with serial communication network . 28 Figure 13 AIS circuit-breaker (example 3) with serial communication netw
39、ork 29 Figure 14 AIS circuit-breaker (example 4) with serial communication network 29 Figure 15 Performance test of an intelligent switchgear (configuration 1) . 33 Figure 16 Performance test of an intelligent switchgear (configuration 2) . 34 Figure C.1 Performance test of an intelligent switchgear
40、 CBC operating time 44 Figure C.2 Performance test of an intelligent switchgear CB operating time 45 Table 1 LNs on process level . 14 Table 2 ACSI basic conformance statement . 16 Table 3 ACSI models conformance statement 17 Table 4 Additional restrictions for GOOSE . 18 Table 5 ACSI service confor
41、mance statement 19 BS EN 62271-3:2015 4 IEC 62271-3:2015 IEC 2015 Table A.1 Test overview table 37 Table B.1 Common data class VSD . 38 Table B.2 New Data Objects added to LN XCBR 39 Table B.3 New data objects added to LN XSWI 40 Table B.4 Conditions for application of new data objects 41 Table B.5
42、Explanations for attributes (1 of 2) . 42 BS EN 62271-3:2015IEC 62271-3:2015 IEC 2015 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR Part 3: Digital interfaces based on IEC 61850 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide org
43、anization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities
44、, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt
45、 with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined b
46、y agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3
47、) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they ar
48、e used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and t
49、he corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liabilit
