1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsWB9423_BSI_StandardColCov_noK_AW:BSI FRONT COVERS 5/9/08 12:55 Page 1Digital addressable lighting interface Part 204: Particular requirements for control gear Low voltage halogen lam
2、ps (device type 3)BS EN 62386-204:2009National forewordThis British Standard is the UK implementation of EN 62386-204:2009. It isidentical to IEC 62386-204:2009.The UK participation in its preparation was entrusted by Technical CommitteeCPL/34, Lamps and related equipment, to Subcommittee CPL/34/3,
3、Auxiliariesfor lamps.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2009ISBN 978 0 580 57539 6ICS 29.130.99
4、; 29.140.50; 29.140.99Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 October 2009Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARD
5、BS EN 62386-204:2009EUROPEAN STANDARD EN 62386-204 NORME EUROPENNE EUROPISCHE NORM August 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1
6、000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62386-204:2009 E ICS 29.140.50; 29.140.99 English version Digital addressable lighting interface - Part 204: Particular requirements for control gear - Low voltage
7、halogen lamps (device type 3) (IEC 62386-204:2009) Interface dclairage adressable numrique - Partie 204: Exigences particulires pour les appareillages de commande - Lampes halogne basse tension (dispositif de type 3) (CEI 62386-204:2009) Digital adressierbare Schnittstelle fr die Beleuchtung - Teil
8、204: Besondere Anforderungen an Betriebsgerte - Niedervolt-Halogenlampen (Gertetyp 3) (IEC 62386-204:2009) This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europe
9、an Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (Engli
10、sh, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, B
11、elgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 6
12、2386-204:2009EN 62386-204:2009 - 2 - Foreword The text of document 34C/876/FDIS, future edition 1 of IEC 62386-204, prepared by SC 34C, Auxiliaries for lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62386-204 on 2009
13、-07-01. This Part 204 is intended to be used in conjunction with EN 62386-101 and EN 62386-102, which contain general requirements for the relevant product type (control gear or control devices). The following dates were fixed: latest date by which the EN has to be implemented at national level by p
14、ublication of an identical national standard or by endorsement (dop) 2010-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2012-07-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62386-204:2009
15、 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60598-1 NOTE Harmonized as EN 60598-1:2008 (modified). IEC 60669-2-1 NOTE Harmonized as EN 60669-2-1:2004 (modifi
16、ed). IEC 60921 NOTE Harmonized as EN 60921:2004 (not modified). IEC 60923 NOTE Harmonized as EN 60923:2005 (not modified). IEC 60925 NOTE Harmonized as EN 60925:1991 (not modified). IEC 60929 NOTE Harmonized as EN 60929:2006 (not modified). IEC 61347-1 NOTE Harmonized as EN 61347-1:2008 (modified).
17、IEC 61347-2-3 NOTE Harmonized as EN 61347-2-3:2001 (not modified). IEC 61547 NOTE Harmonized as EN 61547:2009 (not modified). CISPR 15 NOTE Harmonized as EN 55015:2006 (not modified). _ BS EN 62386-204:2009- 3 - EN 62386-204:2009 Annex ZA (normative) Normative references to international publication
18、s with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
19、NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 62386-101 2009 Digital addressable lighting interface - Part 101: General requirements - System EN 62386-101 2009 IEC 62386-102 2009
20、 Digital addressable lighting interface - Part 102: General requirements - Control gearEN 62386-102 2009 BS EN 62386-204:2009 2 62386-204 IEC:2009 CONTENTS FOREWORD.3 INTRODUCTION.5 1 Scope.6 2 Normative references .6 3 Terms and definitions .6 4 General 7 5 Electrical specifications 7 6 Interface p
21、ower supply .7 7 Transmission protocol structure7 8 Timing 7 9 Method of operation .7 10 Declaration of variables8 11 Definition of commands 9 12 Test procedures .14 Annex A (informative) Examples of algorithms .35 Bibliography36 Figure 1 Application extended configuration command sequence example.1
22、0 Figure 2 Test sequence QUERY FEATURES15 Figure 3 Test sequence QUERY SHORT CIRCUIT .16 Figure 4 Test sequence QUERY OPEN CIRCUIT .17 Figure 5 Test sequence QUERY LOAD DECREASE.18 Figure 6 Test sequence QUERY LOAD INCREASE 19 Figure 7 QUERY CURRENT PROTECTOR ACTIVE: Underload .20 Figure 8 QUERY CUR
23、RENT PROTECTOR ACTIVE: Overload .21 Figure 9 QUERY THERMAL SHUT DOWN .22 Figure 10 QUERY THERMAL OVERLOAD23 Figure 11 REFERENCE SYSTEM POWER .24 Figure 12 REFERENCE SYSTEM POWER: 100 ms-timeout .25 Figure 13 REFERENCE SYSTEM POWER: Command in-between .27 Figure 14 REFERENCE SYSTEM POWER: 15 minutes
24、timer .27 Figure 15 REFERENCE SYSTEM POWER: failed.28 Figure 16 ENABLE / DISABLE CURRENT PROTECTOR29 Figure 17 ENABLE DEVICE TYPE: Application extended commands30 Figure 18 ENABLE DEVICE TYPE: Application extended configuration commands 132 Figure 19 ENABLE DEVICE TYPE: Application extended configur
25、ation commands 232 Figure 20 QUERY EXTENDED VERSION NUMBER .33 Figure 21 RESERVED APPLICATION EXTENDED COMMANDS34 Table 1 Declaration of variables.9 Table 2 Summary of the application extended command set 14 BS EN 62386-204:200962386-204 IEC:2009 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ DIGITAL
26、 ADDRESSABLE LIGHTING INTERFACE Part 204: Particular requirements for control gear Low voltage halogen lamps (device type 3) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC Nation
27、al Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicl
28、y Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmen
29、tal organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on te
30、chnical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by
31、 IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uni
32、formity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5
33、) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directo
34、rs, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising o
35、ut of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn
36、 to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62386-204 has been prepared by subcommittee 34C: Auxiliaries for lamps, of IEC techni
37、cal committee 34: Lamps and related equipment. The text of this standard is based on the following documents: FDIS Report on voting 34C/876/FDIS 34C/885/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This public
38、ation has been drafted in accordance with the ISO/IEC Directives, Part 2. This part 204 is intended to be used in conjunction with IEC 62386-101 and IEC 62386-102, which contain general requirements for the relevant product type (control gear or control devices). BS EN 62386-204:2009 4 62386-204 IEC
39、:2009 A list of all parts of IEC 62386 series, under the general title Digital addressable lighting interface, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under
40、“http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition; or amended. BS EN 62386-204:200962386-204 IEC:2009 5 INTRODUCTION This first edition of IEC 62386-204 is published in conjunction with
41、 IEC 62386-101 and IEC 62386-102. The division of IEC 62386 into separately published parts provides for ease of future amendments and revisions. Additional requirements will be added as and when a need for them is recognised. This International Standard, and the other parts that make up IEC 62386-2
42、00 series, in referring to any of the clauses of IEC 62386-101 or IEC 62386-102, specifies the extent to which such a clause is applicable and the order in which the tests are to be performed. The parts also include additional requirements, as necessary. All parts that make up the IEC 62386-200 seri
43、es are self-contained and therefore do not include references to each other. Where the requirements of any of the clauses of IEC 62386-101 or IEC 62386-102 are referred to in this International Standard by the sentence “ The requirements of IEC 62386-1XX, clause n apply”, this sentence is to be inte
44、rpreted as meaning that all requirements of the clause in question of Part 101 or Part 102 apply, except any which are inapplicable to the specific type of lamp control gear covered by Part 204. All numbers used in this International Standard are decimal numbers unless otherwise noted. Hexadecimal n
45、umbers are given in the format 0xVV, where VV is the value. Binary numbers are given in the format XXXXXXXXb or in the format XXXX XXXX, where X is 0 or 1; “x“ in binary numbers means “dont care“. BS EN 62386-204:2009 6 62386-204 IEC:2009 DIGITAL ADDRESSABLE LIGHTING INTERFACE Part 204: Particular r
46、equirements for control gear Low voltage halogen lamps (device type 3) 1 Scope This International Standard specifies a protocol and methods of test for the control by digital signals of electronic control gear for use on a.c. or d.c. supplies, associated with low voltage halogen lamps. NOTE Tests in
47、 this standard are type tests. Requirements for testing individual control gear during production are not included. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated refe
48、rences, the latest edition of the referenced document (including any amendments) applies. IEC 62386-101:2009, Digital addressable lighting interface Part 101: General requirements System IEC 62386-102:2009, Digital addressable lighting interface Part 102: General requirements Control gear 3 Terms an
49、d definitions For the purposes of this document, the terms and definitions given in Clause 3 of IEC 62386-101:2009 and Clause 3 of IEC 62386-102:2009 apply, with the following additions. 3.1 reference measurement process during which gear determines the actual lamp load with internal procedures and measurements, not specified by this standard NOTE The details of this pr
