1、Generic specification of information on products by propertiesPart 1: Principles and methods (IEC 62569-1:2017)BS EN 62569-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62569-1 October 2017 ICS 01.110; 29.0
2、20 English Version Generic specification of information on products by properties - Part 1: Principles and method (IEC 62569-1:2017) Spcification gnrique relative aux informations sur les produits donnes par les proprits - Partie 1: Principes et mthodes (IEC 62569-1:2017) Allgemeine Regeln zur Erste
3、llung von Produktspezifikationen - Teil 1: Grundstze und Methoden (IEC 62569-1:2017) This European Standard was approved by CENELEC on 2017-08-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status
4、 of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French,
5、German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Bel
6、gium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spai
7、n, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of
8、exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62569-1:2017 E National forewordThis British Standard is the UK implementation of EN 62569-1:2017. It is identical to IEC 62569-1:2017. It supersedes DD IEC/PAS 62569-1:2009 , which is withdrawn.The UK part
9、icipation in its preparation was entrusted to Technical Committee GEL/3, Documentation and graphical symbols.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. User
10、s are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 90029 7ICS 29.020; 01.110Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authorit
11、y of the Standards Policy and Strategy Committee on 31 October 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 625691:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62569-1 October 2017 ICS 01.110; 29.020 English Version Generic specification of i
12、nformation on products by properties - Part 1: Principles and method (IEC 62569-1:2017) Spcification gnrique relative aux informations sur les produits donnes par les proprits - Partie 1: Principes et mthodes (IEC 62569-1:2017) Allgemeine Regeln zur Erstellung von Produktspezifikationen - Teil 1: Gr
13、undstze und Methoden (IEC 62569-1:2017) This European Standard was approved by CENELEC on 2017-08-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteratio
14、n. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made
15、 by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Re
16、public, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
17、 Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means res
18、erved worldwide for CENELEC Members. Ref. No. EN 62569-1:2017 E BS EN 625691:2017EN 62569-1:2017 2 European foreword The text of document 3/1310/FDIS, future edition 1 of IEC 62569-1, prepared by IEC/TC 3 “Information structures and elements, identification and marking principles, documentation and
19、graphical symbols“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62569-1:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-05-16 l
20、atest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-08-16 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such p
21、atent rights. Endorsement notice The text of the International Standard IEC 62569-1:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60027 (series) NOTE Harmo
22、nized as EN 60027 (series). IEC 61360-6:2016 NOTE Harmonized as EN 61360-6:2017. IEC 61987-10:2009 NOTE Harmonized as EN 61987-10:2009. IEC 62264 (series) NOTE Harmonized as EN 62264 (series). IEC 81346-1 NOTE Harmonized as EN 81346-1. IEC 82079-1:2012 NOTE Harmonized as EN 82079-1:2012. IEC 80000 (
23、series) NOTE Harmonized as EN 80000 (series). ISO 80000 (series) NOTE Harmonized as EN ISO 80000 (series). ISO 14040:2006 NOTE Harmonized as EN ISO 14040:2006. BS EN 625691:2017EN 62569-1:2017 2 European foreword The text of document 3/1310/FDIS, future edition 1 of IEC 62569-1, prepared by IEC/TC 3
24、 “Information structures and elements, identification and marking principles, documentation and graphical symbols“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62569-1:2017. The following dates are fixed: latest date by which the document has to be implemented at nati
25、onal level by publication of an identical national standard or by endorsement (dop) 2018-05-16 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-08-16 Attention is drawn to the possibility that some of the elements of this document may be the s
26、ubject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62569-1:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography,
27、 the following notes have to be added for the standards indicated: IEC 60027 (series) NOTE Harmonized as EN 60027 (series). IEC 61360-6:2016 NOTE Harmonized as EN 61360-6:2017. IEC 61987-10:2009 NOTE Harmonized as EN 61987-10:2009. IEC 62264 (series) NOTE Harmonized as EN 62264 (series). IEC 81346-1
28、 NOTE Harmonized as EN 81346-1. IEC 82079-1:2012 NOTE Harmonized as EN 82079-1:2012. IEC 80000 (series) NOTE Harmonized as EN 80000 (series). ISO 80000 (series) NOTE Harmonized as EN ISO 80000 (series). ISO 14040:2006 NOTE Harmonized as EN ISO 14040:2006. EN 62569-1:2017 3 Annex ZA (normative) Norma
29、tive references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undate
30、d references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Sta
31、ndards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61360-1 - Standard data element types with associated classification scheme - Part 1: Definitions - Principles and methods FprEN 61360-1 - IEC/TS 62720 - Identification of units of measurement for co
32、mputer-based processing - - BS EN 625691:2017This page deliberately left blank 2 IEC 62569-1:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 10 2 Normative references 10 3 Terms, definitions and abbreviated terms 10 3.1 Terms and definitions 10 3.2 Abbreviated terms . 15 4 Specification
33、s 15 5 Properties 16 5.1 Object properties versus dictionary properties. 16 5.2 Sets of properties for specific purposes 18 5.3 Properties of components . 18 6 Property qualifiers . 19 6.1 General . 19 6.2 Life cycle qualifier . 20 6.2.1 General . 20 6.2.2 SPE . 20 6.2.3 INQ 20 6.2.4 OFF . 21 6.2.5
34、CON 21 6.2.6 SUP . 21 6.2.7 BUILT 21 6.2.8 OP . 21 6.2.9 DECOM . 21 6.2.10 Example of the use of the life cycle qualifier 21 6.2.11 Example of the use of life cycle qualifier associated with a single property within a transaction applying the XML notation . 22 6.3 Applicability qualifier . 22 6.3.1
35、General . 22 6.3.2 AVP . 23 6.3.3 AVN . 23 6.3.4 AVA . 23 6.3.5 NA . 23 6.3.6 Application example Method A (implicit marking) 23 6.3.7 Application example Method B (explicit marking) 24 6.4 Value origin qualifier . 24 6.4.1 General . 24 6.4.2 EST . 25 6.4.3 CAL . 25 6.4.4 MEA 25 6.4.5 SET . 25 6.4.6
36、 Example of the use of the value origin qualifier 25 6.5 Value processing qualifier . 25 6.5.1 General . 25 6.5.2 ARITHM . 26 6.5.3 MED 26 2 IEC 62569-1:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 10 2 Normative references 10 3 Terms, definitions and abbreviated terms 10 3.1 Terms a
37、nd definitions 10 3.2 Abbreviated terms . 15 4 Specifications 15 5 Properties 16 5.1 Object properties versus dictionary properties. 16 5.2 Sets of properties for specific purposes 18 5.3 Properties of components . 18 6 Property qualifiers . 19 6.1 General . 19 6.2 Life cycle qualifier . 20 6.2.1 Ge
38、neral . 20 6.2.2 SPE . 20 6.2.3 INQ 20 6.2.4 OFF . 21 6.2.5 CON 21 6.2.6 SUP . 21 6.2.7 BUILT 21 6.2.8 OP . 21 6.2.9 DECOM . 21 6.2.10 Example of the use of the life cycle qualifier 21 6.2.11 Example of the use of life cycle qualifier associated with a single property within a transaction applying t
39、he XML notation . 22 6.3 Applicability qualifier . 22 6.3.1 General . 22 6.3.2 AVP . 23 6.3.3 AVN . 23 6.3.4 AVA . 23 6.3.5 NA . 23 6.3.6 Application example Method A (implicit marking) 23 6.3.7 Application example Method B (explicit marking) 24 6.4 Value origin qualifier . 24 6.4.1 General . 24 6.4
40、.2 EST . 25 6.4.3 CAL . 25 6.4.4 MEA 25 6.4.5 SET . 25 6.4.6 Example of the use of the value origin qualifier 25 6.5 Value processing qualifier . 25 6.5.1 General . 25 6.5.2 ARITHM . 26 6.5.3 MED 26 BS EN 625691:2017IEC 62569-1:2017 IEC 2017 3 6.5.4 MOD 26 6.5.5 WARITHM . 27 6.5.6 GEOM . 27 6.5.7 WG
41、EOM 27 6.5.8 HARM 28 6.5.9 RMS 28 6.6 Multiple qualifiers 28 6.7 When to use a qualifier . 28 6.8 Example of the use of multiple qualifiers associated with a single property within a transaction applying, for example, the XML notation based on the example shown in 6.6 . 29 7 Property values . 29 7.1
42、 General . 29 7.2 How to deal with special values 29 7.3 How to use the level type concept . 30 7.4 Availability of values associated with (dictionary) properties . 30 7.5 Application of unit systems . 30 7.6 Use of units in software applications . 30 8 Data reliability and quality . 31 8.1 General
43、. 31 8.2 Description of inaccuracies of quantitative values . 31 8.3 Intended design tolerances on products 32 Annex A (normative) (Dictionary) property definitions . 33 A.1 General . 33 A.2 Source definitions of (dictionary) properties and classes of (dictionary) properties in this document . 33 A.
44、2.1 Definitions of class of (dictionary) properties . 33 A.2.2 Definition of (dictionary) properties to class AAB001: . 34 Bibliography 36 Figure 1 Context of generic specification for information on products . 8 Figure 2 Business scenario between parties 9 Figure 3 Import and export possibilities u
45、sing tagged formats 9 Figure 4 Relation between the properties of a product type and the (dictionary) properties of a data dictionary used for their expression . 17 Figure 5 Inclusion of sets of properties 18 Figure 6 Relation between the components of a product type and the product type used for th
46、eir implementation 19 Figure 7 Development of life cycle qualifier over time. 22 Table 1 Example of the use of the life cycle qualifier 21 Table 2 Example of the use of the value origin qualifier . 25 Table 3 Example of the use of multiple qualifiers . 28 Table 4 Tolerance concept . 32 BS EN 625691:
47、2017IEC 62569-1:2017 IEC 2017 3 6.5.4 MOD 26 6.5.5 WARITHM . 27 6.5.6 GEOM . 27 6.5.7 WGEOM 27 6.5.8 HARM 28 6.5.9 RMS 28 6.6 Multiple qualifiers 28 6.7 When to use a qualifier . 28 6.8 Example of the use of multiple qualifiers associated with a single property within a transaction applying, for exa
48、mple, the XML notation based on the example shown in 6.6 . 29 7 Property values . 29 7.1 General . 29 7.2 How to deal with special values 29 7.3 How to use the level type concept . 30 7.4 Availability of values associated with (dictionary) properties . 30 7.5 Application of unit systems . 30 7.6 Use
49、 of units in software applications . 30 8 Data reliability and quality . 31 8.1 General . 31 8.2 Description of inaccuracies of quantitative values . 31 8.3 Intended design tolerances on products 32 Annex A (normative) (Dictionary) property definitions . 33 A.1 General . 33 A.2 Source definitions of (dictionary) properties and classes of (dictionary) properties in this document . 33 A.2.1 Definitions of class of (dictionary) properties . 33 A.2.2 Definition of (dictionary) properties t
