1、In-cable control and protection device for mode 2 charging of electric road vehicles (IC-CPD) (IEC 62752:2016)BS EN 62752:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 62752:2016. It is ident
2、ical to IEC 62752:2016. It partially supersedes BS EN 61851-1:2011, specifically when an ICPD product is used for the purpose of mode 2 EV charging (see CENELEC foreword).The UK participation in its preparation was entrusted by TechnicalCommittee PEL/23, Electrical accessories, to Subcommittee PEL/2
3、3/1, Circuitbreakers and similar equipment for household use.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application.
4、 The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 76698 5ICS 43.120Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 S
5、eptember 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62752:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62752 August 2016 ICS 29.120.50 Supersedes EN 61851-1:2011 (partially) English Version In-cable control and protection device for mode 2
6、charging of electric road vehicles (IC-CPD) (IEC 62752:2016) Appareil de contrle et de protection intgr au cble pour la charge en mode 2 des vhicules lectriques (IC-CPD) (IEC 62752:2016) Ladeleitungsintegrierte Steuer- und Schutzeinrichtung fr die Ladebetriebsart 2 von Elektro-Straenfahrzeugen (IC-C
7、PD) (IEC 62752:2016) This European Standard was approved by CENELEC on 2016-04-08. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists
8、 and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation und
9、er the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Es
10、tonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committe
11、e for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC
12、 Members. Ref. No. EN 62752:2016 E BS EN 62752:2016EN 62752:2016 2 European foreword The text of document 23E/919/FDIS, future edition 1 of IEC 62752, prepared by SC 23E “Circuit-breakers and similar equipment for household use” of IEC/TC 23 “Electrical accessories” was submitted to the IEC-CENELEC
13、parallel vote and approved by CENELEC as EN 62752:2016. The following dates are fixed: latest date by which the document has to beimplemented at national level bypublication of an identical nationalstandard or by endorsement(dop) 2017-02-19 latest date by which the nationalstandards conflicting with
14、 thedocument have to be withdrawn(dow) 2017-12-31 This European Standard partially supersedes EN 61851-1:2011 for what concerns the product IC-CPD as a cable assembly for mode 2 EV charging. The DOW will be 2017-12-31. Attention is drawn to the possibility that some of the elements of this document
15、may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirement
16、s of EU Directive(s). For the relationship with EU Directives see informative Annexes ZZA and ZZB, which are integral parts of this document. Endorsement notice The text of the International Standard IEC 62752:2016 was approved by CENELEC as a European Standard without any modification. In the offic
17、ial version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60269-1:2006 NOTE Harmonized as EN 60269-1:2007 (not modified). IEC 60364 Series NOTE Harmonized as HD 384/HD 60364 Series. IEC 60364-7-722 NOTE Harmonized as HD 60364-7-722. IEC 60999-1:1999 NOTE Ha
18、rmonized as EN 60999-1:2000 (not modified). IEC 60947-1:2007 NOTE Harmonized as EN 60947-1:2007 (not modified). IEC 61008-1:2010 NOTE Harmonized as EN 61008-1:2012 (modified). IEC 62423:2009 NOTE Harmonized as EN 62423:2009 (modified). BS EN 62752:2016EN 62752:2016 3 Annex ZA (normative) Normative r
19、eferences to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, th
20、e latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in
21、 this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 60065 - Audio, video and similar electronic apparatus - Safety requirements EN 60065 - IEC 60068-2-1 - Environmental testing - Part 2-1: Tests - Test A: Cold EN 60068-2-1 - IEC 60068-2-5 - Environmental testing - Par
22、t 2-5: Tests - Test Sa: Simulated solar radiation at ground level and guidance for solar radiation testing EN 60068-2-5 - IEC 60068-2-11 - Basic environmental testing procedures - Part 2-11: Tests - Test Ka: Salt mist EN 60068-2-11 - IEC 60068-2-27 - Environmental testing - Part 2-27: Tests - Test E
23、a and guidance: Shock EN 60068-2-27 - IEC 60068-2-30 - Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) EN 60068-2-30 - IEC 60068-2-31 - Environmental testing - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens EN 60068
24、-2-31 - IEC 60068-2-64 - Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance EN 60068-2-64 - IEC 60068-3-4 - Environmental testing - Part 3-4: Supporting documentation and guidance - Damp heat tests EN 60068-3-4 - IEC 60112 - Method for the determination of t
25、he proof and the comparative tracking indices of solid insulating materials EN 60112 - IEC 60227 Series Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - - IEC 60245 Series Rubber insulated cables - Rated voltages up to and including 450/750 V - - IEC 60309 Series
26、 Plugs, socket-outlets and couplers for industrial purposes EN 60309 Series BS EN 62752:2016EN 62752:2016 4 Publication Year Title EN/HD Year IEC 60309-1 1999 Plugs, socket-outlets and couplers for industrial purposes - Part 1: General requirements EN 60309-1 +A11 1999 2004 +A1 (mod) 2005 +A1 2007 +
27、A2 2012 +A2 2012 IEC 60309-2 - Plugs, socket-outlets and couplers for industrial purposes - Part 2: Dimensional interchangeability requirements for pin and contact-tube accessories EN 60309-2 - IEC 60364-4-44 (mod) 2007 Low-voltage electrical installations - Part 4-44: Protection for safety - Protec
28、tion against voltage disturbances and electromagnetic disturbances HD 60364-4-442 2012 IEC 60384-14 Series Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains EN 60384-1
29、4 Series IEC 60417-DB - Graphical symbols for use on equipment - - IEC 60529 1989 Degrees of protection provided by enclosures (IP Code) EN 60529 + corr. May 1991 1993 IEC 60664-1 2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests EN 60
30、664-1 2007 IEC 60664-3 - Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution EN 60664-3 - IEC 60695-2-10 - Fire hazard testing - Part 2-10: Glowing/hot-wire based test methods - Glow-wire apparatus and common
31、 test procedure EN 60695-2-10 - IEC 60695-2-11 - Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products (GWEPT) EN 60695-2-11 - IEC 60884-1 2002 Plugs and socket-outlets for household and similar purposes - Part 1: General requireme
32、nts - - +A1 2006 - - +A2 2013 - - IEC 61249-2 Series Materials for printed boards and other interconnecting structures EN 61249-2 Series IEC 61540 - Electrical accessories - Portable residual current devices without integral overcurrent protection for household and similar use (PRCDs) HD 639 S1 - BS
33、 EN 62752:2016EN 62752:2016 5 Publication Year Title EN/HD Year IEC 61543 1995 Residual current-operated protective devices (RCDs) for household and similar use - Electromagnetic compatibility EN 61543 + corr. December +A11 +A12 1995 1997 2003 2005 +A1 2004 - - +A2 2005 +A2 2006 IEC 61851-1 2010 Ele
34、ctric vehicle conductive charging system - Part 1: General requirements EN 61851-1 2011 IEC 62196-1 - Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements EN 62196-1 - IEC 62196-2 - Plugs, socket-outlets, vehicle conne
35、ctors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories EN 62196-2 - IEC/TS 62763 2013 Pilot function through a control pilot circuit using PWM modulation and a control pilot
36、 wire - - CISPR 14 Series Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus EN 55014 Series ISO 178 - Plastics - Determination of flexural properties EN ISO 178 - ISO 179 Series Plastics - Determination of Charpy impact properties EN ISO 179
37、Series ISO 179-1 - Plastics - Determination of Charpy impact properties - Part 1: Non-instrumented impact test EN ISO 179-1 - ISO 2409 - Paints and varnishes - Cross-cut test EN ISO 2409 - ISO 4628-3 - Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of
38、 defects, and of intensity of uniform changes in appearance - Part 3: Assessment of degree of rusting EN ISO 4628-3 - ISO 4892-2 2013 Plastics - Methods of exposure to laboratory light sources - Part 2: Xenon-arc lamps EN ISO 4892-2 2013 ISO 16750-5 2010 Road vehicles - Environmental conditions and
39、testing for electrical and electronic equipment - Part 5: Chemical loads - - ISO 17409 2015 Electrically propelled road vehicles - Connection to an external electric power supply - Safety requirements - - BS EN 62752:2016EN 62752:2016 6 Annex ZB (normative) Special national conditions Special nation
40、al condition: National characteristic or practice that cannot be changed even over a long period, e.g. climatic conditions, electrical earthing conditions. NOTE If it affects harmonization, it forms part of the European Standard or Harmonization Document. For the countries in which the relevant spec
41、ial national conditions apply these provisions are normative, for other countries they are informative. Country Clause Special national condition Denmark 1 IC-CPD: For IC-CPDs supplied with a plug for household and similar use, repeated continuous loads of long duration, shall be limited to 6 A. Fin
42、land 1 IC-CPD: The following additional requirement applies: for IC-CPDs supplied with a plug for household and similar use the maximum charging current is 8 A for long lasting charging. Norway 4.3.4 IC-CPD: In Norway, pluggable types where connector is part of the ICCB shall not be used. Switzerlan
43、d 5.3.2 IC-CPD: In Switzerland, simplified control pilot circuit is not allowed. Switzerland 5.3.2 IC-CPD: In Switzerland, the use of EN 60309-2 accessories is recommended for mode 2 connections for more than 8 A (2 kVA). France 8.1 IC-CPD: In France, the use of solid brass pins is required. France
44、8.3.1 IC-CPD: In France, For a rated current above 8 A, rewirable connections of the household plug are not allowed. Connection between the household plugs and cable shall use terminations (see definition 3.2.3). Switzerland 8.3.1 IC-CPD: In Switzerland, the use of EN 60309-2 accessories is recommen
45、ded for mode 2 connections for more than 8 A (2 kVA). Belgium 9.7.7.4 IC-CPD: In Belgium, an IC-CPD shall be able to function properly in both LNE and LLE configurations, provided the correct voltage is available. BS EN 62752:2016EN 62752:2016 7 Annex ZC (informative) A-deviations A-deviation: Natio
46、nal deviation due to regulations, the alteration of which is for the time being outside the competence of the CEN-CENELEC national member. This European Standard falls under Directives 2014/35/EU and 2014/30/EU. NOTE (from CEN/CENELEC IR Part 2:2015, 2.16) Where standards fall under EC Directives or
47、 Regulations, it is the view of the Commission of the European Communities (OJ No C 59; 1982-03-09) that the effect of the decision of the Court of Justice in case 815/79 Cremonini/Vrankovich (European Court Reports 1980, p. 3583) is that compliance with A-deviations is no longer mandatory and that
48、the free movement of products complying with such a standard should not be restricted within the EC except under the safeguard procedure provided for in the relevant Directive or Regulation. A-deviations in an EFTA-country are valid instead of the relevant provisions of the European Standard in that
49、 country until they have been removed. Country Clause A-deviation Denmark General The requirements in this standard cannot replace or change any part of the Danish National requirements for plugs for household and similar use according to DS 60884-2-D1. BS EN 62752:2016EN 62752:2016 8 Annex ZZA (informative) Relationship between this European standard and the essential requirements of Directive 2014/30/EU 2014 OJ L96 aimed to be covered This European standard has been prepared under a Commissions standardisation request as
