1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - SafetyPart 3-14: Particular requirements for transportable drain cleanersBS EN 62841-3-14:2017EUROPEAN STANDARD NORME EUROPENN
2、E EUROPISCHE NORM EN 62841-3-14 December 2017 ICS 25.140.20 English Version Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-14: Particular requirements for transportable drain cleaners (IEC 62841-3-14:2017 , modified) Outils lectroportatif
3、s moteur, outils portables et machines pour jardins et pelouses - Scurit - Partie 3-14: Exigences particulires pour les furets portables (IEC 62841-3-14:2017 , modifie) Elektrische motorbetriebene handgefhrte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 3-14:
4、 Besondere Anforderungen fr transportable Abflussreiniger (IEC 62841-3-14:2017 , modifiziert) This European Standard was approved by CENELEC on 2017-10-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard t
5、he status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English,
6、 French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Aus
7、tria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slove
8、nia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2017 CENELEC A
9、ll rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62841-3-14:2017 E National forewordThis British Standard is the UK implementation of EN 62841-3-14:2017. It is derived from IEC 62841-3-14:2017.The CENELEC common modifications have been implem
10、ented at the appropriate places in the text. The start and finish of each common modification is indicated in the text by tags .The UK participation in its preparation was entrusted to Technical Committee CPL/116, Safety of motor-operated electric tools.A list of organizations represented on this co
11、mmittee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 95491 7ICS 25.1
12、40.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 June 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62841-3-1
13、4:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62841-3-14 December 2017 ICS 25.140.20 English Version Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-14: Particular requirements for transportable drain cleaners (IEC 62841-3-14:
14、2017 , modified) Outils lectroportatifs moteur, outils portables et machines pour jardins et pelouses - Scurit - Partie 3-14: Exigences particulires pour les furets portables (IEC 62841-3-14:2017 , modifie) Elektrische motorbetriebene handgefhrte Werkzeuge, transportable Werkzeuge und Rasen- und Gar
15、tenmaschinen - Sicherheit - Teil 3-14: Besondere Anforderungen fr transportable Abflussreiniger (IEC 62841-3-14:2017 , modifiziert) This European Standard was approved by CENELEC on 2017-10-16. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditio
16、ns for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exist
17、s in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the natio
18、nal electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Port
19、ugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Scie
20、nce 23, B-1040 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62841-3-14:2017 E BS EN 62841-3-14:2017EN 62841-3-14:2017 (E) 2 European foreword The text of document 116/340/FDIS, future edition 1 of IEC 62841-3-14, pr
21、epared by IEC/TC 116 “Safety of motor-operated electric tools“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62841-3-14:2017. A draft amendment, which covers common modifications to IEC 62841-3-14 (116/340/FDIS), was prepared by CLC/TC 116 “Safety of motor-operated ele
22、ctric tools“ and approved by CENELEC. The following dates are fixed: latest date by which this document has to be implementedat national level by publication of an identicalnational standard or by endorsement(dop) 2018-10-16 latest date by which the national standards conflictingwith this document h
23、ave to be withdrawn(dow) 2021-10-16 This European Standard is divided into four parts: Part 1: General requirements which are common to most hand-held electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this standard; Part
24、 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This Part 3-14 is to be used in conjunction with EN 62841-1:2015. This Part 3-14 supplements or
25、 modifies the corresponding clauses in EN 62841-1:2015, so as to convert it into the European Standard: Particular requirements for transportable drain cleaners. Where a particular subclause of Part 1 is not mentioned in this Part 3-14, that subclause applies as far as relevant. When this standard s
26、tates “addition“, “modification“ or “replacement“, the relevant text in Part 1 is to be adapted accordingly. The following print types are used: - requirements; in roman type - test specifications: in italic type; - notes: in smaller roman type. The terms defined in Clause 3 are printed in bold type
27、face. Subclauses, notes, tables and figures which are additional to those in Part 1 are numbered starting from 101. Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62841-3-14:2017 are prefixed “Z”. This European Standard follows the overall requirements o
28、f EN ISO 12100. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European
29、Commission and the European Free Trade Association and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s), see informative Annex ZZ, which is an integral part of this document. Compliance with the clauses of Part 1 together with this Part 3-14 provides one
30、means of conforming with the essential health and safety requirements of the Directive concerned. BS EN 62841-3-14:2017EN 62841-3-14:2017 (E) 3 Endorsement notice The text of the International Standard IEC 62841-3-14:2017 was approved by CENELEC as a European Standard with agreed common modification
31、s. BS EN 62841-3-14:2017EN 62841-3-14:2017 (E) 6 Annex ZZ (informative) Relationship between this European Standard and the essential requirements of Directive 2006/42/EC 2006 OJ L157 aimed to be covered This European Standard has been prepared under a Commissions standardisation request M/396 to pr
32、ovide one voluntary means of conforming to essential requirements of Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC. Once this standard is cited in the Official Journal of the European Union under that Directive, compli
33、ance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. Table ZZ.1 Correspondence between this European
34、 Standard and Annex I of Directive 2006/42/EC Essential Requirements of Directive 2006/42/EC Clause(s) / sub-clause(s) of this EN Remarks / Notes Annex I All clauses All corresponding requirements are covered by complying with all clauses. WARNING 1: Presumption of conformity stays valid only as lon
35、g as a reference to this European standard is maintained in the list published in the Official Journal of the European Union. Users of this standard should consult frequently the latest list published in the Official Journal of the European Union. WARNING 2: Other Union legislation may be applicable
36、 to the product(s) falling within the scope of this standard. BS EN 62841-3-14:2017 2 IEC 62841-3-14:2017 IEC 2017 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 4 General requirements 7 5 General conditions for the tests . 7 5.17Addition: 7 6 Radiation, toxicity
37、and similar hazards . 7 7 Classification . 7 8 Marking and instructions 7 8.14.1Addition: . 7 8.14.1.1Addition: 8 8.14.1.101Safety instructions for drain cleaners . 8 8.14.2 a)Additional items: . 8 8.14.2 b)Additional items: . 8 8.14.2 c)Additional items: . 8 9 Protection against access to live part
38、s . 9 10 Starting . 9 11 Input and current . 9 12 Heating 9 13 Resistance to heat and fire 9 14 Moisture resistance . 9 14.5Replacement: 9 15 Resistance to rusting . 10 16 Overload protection of transformers and associated circuits 10 17 Endurance . 10 18 Abnormal operation . 10 19 Mechanical hazard
39、s . 11 19.101Additional requirements for drum machines . 11 19.102Additional requirements for sectional machines . 11 20 Mechanical strength 12 21 Construction 12 22 Internal wiring 13 23 Components 13 24 Supply connection and external flexible cords . 13 25 Terminals for external conductors 13 26 P
40、rovision for earthing 13 27 Screws and connections 14 28 Creepage distances, clearances and distances through insulation . 14 Annexes . 19 Annex I (informative) Measurement of noise and vibration emissions . 19 I.2Noise test code (grade 2) 19 I.2.4Installation and mounting conditions of the power to
41、ols during noise tests . 19 BS EN 62841-3-14:2017IEC 62841-3-14:2017 IEC 2017 3 I.2.5Operating conditions . 19 I.3Vibration . 19 Annex K (normative) Battery tools and battery packs . 20 K.1 Addition: 20 Annex L (normative) Battery tools and battery packs provided with mains connection or non-isolate
42、d sources . 21 L.1 Addition: 21 Bibliography 22 Figure 101 Drum machine 14 Figure 102 Sectional machine 15 Figure 103 Guarding of drum machines . 16 Figure 104 Test probe a . 16 Figure 105 Construction of drum machines (example) 17 Figure 106 Locking mechanism for drain cleaner cable (example) 18 Ta
43、ble 4 Required performance levels . 10 BS EN 62841-3-14:2017 4 IEC 62841-3-14:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRIC MOTOR-OPERATED HAND-HELD TOOLS, TRANSPORTABLE TOOLS AND LAWN AND GARDEN MACHINERY SAFETY Part 3-14: Particular requirements for transportable drain cleaner
44、s FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of IEC is to promoteinternational co-operation on all questions concerning standardization in the
45、 electrical and electronic fields. Tothis end and in addition to other activities, IEC publishes International Standards, Technical Specifications,Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IECPublication(s)”). Their preparation is entrusted to t
46、echnical committees; any IEC National Committee interestedin the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closelywith the International Orga
47、nization for Standardization (ISO) in accordance with conditions determined byagreement between the two organizations.2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an internationalconsensus of opinion on the relevant subjects since each technical c
48、ommittee has representation from allinterested IEC National Committees.3) IEC Publications have the form of recommendations for international use and are accepted by IEC NationalCommittees in that sense. While all reasonable efforts are made to ensure that the technical content of IECPublications is
49、 accurate, IEC cannot be held responsible for the way in which they are used or for anymisinterpretation by any end user.4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publicationstransparently to the maximum extent possible in their national and regional publications. Any divergencebetween any IEC Publication and the corresponding national or regional publication shall be clearly indicated inthe latter.5) IEC itself does not provide any attestation
