1、Organic light emitting diode(OLED) panels for general lighting Performance requirementsBS EN 62922:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implementation of EN 62922:2017. It is identical to IEC 62922:2016.
2、The UK participation in its preparation was entrusted by TechnicalCommittee CPL/34, Lamps and Related Equipment, to SubcommitteeCPL/34/1, Electric lamps.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all t
3、he necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limited 2017ISBN 978 0 580 86527 5ICS 29.140.99Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Stand
4、ard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62922:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62922 February 2017 ICS 29.140.99 English Vers
5、ion Organic light emitting diode (OLED) panels for general lighting - Performance Requirements (IEC 62922:2016) Panneaux diodes lectroluminescentes organiques (OLED) destins lclairage gnral - Exigences de performance (IEC 62922:2016) Organische-Licht-emittierende-Dioden- (OLED-) Panels - Anforderung
6、en an die Arbeitsweise (IEC 62922:2016) This European Standard was approved by CENELEC on 2016-12-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteratio
7、n. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made
8、 by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Re
9、public, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United
10、 Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means res
11、erved worldwide for CENELEC Members. Ref. No. EN 62922:2017 E BS EN 62922:2017EN 62922:2017 2 European foreword The text of document 34A/1942/FDIS, future edition 1 of IEC 62922, prepared by SC 34A “Lamps“ of IEC/TC 34 “Lamps and related equipment“ was submitted to the IEC-CENELEC parallel vote and
12、approved by CENELEC as EN 62922:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-09-23 latest date by which the national standards conflicting with the document
13、 have to be withdrawn (dow) 2019-12-23 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the Internationa
14、l Standard IEC 62922:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068-2-20:2008 NOTE Harmonized as EN 60068-2-20:2008 (not modified). IEC 60068-2-21:200
15、6 NOTE Harmonized as EN 60068-2-21:2006 (not modified). IEC 60749-14:2003 NOTE Harmonized as EN 60749-14:2003 (not modified). IEC 61747-10-1:2013 NOTE Harmonized as EN 61747-10-1:2013 (not modified). BS EN 62922:2017EN 62922:2017 3 Annex ZA (normative) Normative references to international publicati
16、ons with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced d
17、ocument (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.c
18、enelec.eu Publication Year Title EN/HD Year IEC 60050-845 - International Electrotechnical Vocabulary (IEV) - Chapter 845: Lighting - - IEC 62868 - Organic light emitting diode (OLED) panels for general lighting - Safety requirements EN 62868 - IEC/TR 62732 - Three-digit code for designation of colo
19、ur rendering and correlated colour temperature - - IEC/TS 62972 - General lighting - Organic light emitting diode (OLED) products and related equipment - Terms and definitions - - ISO 11664-5/ CIE S 014-5/E 2009 Colorimetry - Part 5: CIE 1976 L*u*v* Colour space and u, v uniform chromaticity scale d
20、iagram EN ISO 11664-5 2011 1CIE 013.3 1995 Method of measuring and specifying colour rendering properties of light source - - CIE TN 001 2014 Chromaticity difference specification for light source - - 1Superseded by EN ISO 11664-5:2016 (SO/CIE 11664-5:2016). BS EN 62922:2017 2 IEC 62922:2016 IEC 201
21、6 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 4 General statement and test conditions . 7 4.1 General statement 7 4.2 General test conditions . 7 4.3 Stabilization 8 4.3.1 General requirements for stabilization 8 4.3.2 Current-driven stabilization 8 4.3.3 Volta
22、ge-driven stabilization 8 5 Marking . 8 5.1 Contents and location . 8 5.2 Information on reliability of electrical connection . 9 6 Input power . 9 7 Initial photometric characteristics . 9 7.1 General . 9 7.2 Luminous flux . 10 7.3 Luminous efficacy . 10 7.4 Chromaticity coordinates . 10 7.5 Correl
23、ated colour temperature (CCT) 10 7.6 Colour rendering index (CRI) 10 7.7 Luminance uniformity 11 7.7.1 Average luminance (Lav) . 11 7.7.2 Luminance uniformity (U) . 11 7.8 Luminous intensity distribution 11 7.9 Surface chromaticity uniformity . 12 7.10 Angular chromaticity uniformity . 12 8 Maintain
24、ed photometric characteristics 12 9 Reliability 13 9.1 High temperature high humidity operation 13 9.2 High temperature high humidity storage . 13 9.3 Reliability of connection 13 10 Information for controlgear design . 14 Annex A (informative) Use of regional standards 15 Annex B (informative) Meas
25、uring method of angular chromaticity uniformity 16 Annex C (normative) Measuring method for luminous flux 18 C.1 General . 18 C.2 Integrating sphere measurements . 18 C.2.1 Integrating sphere methods and installation position 18 C.2.2 Size of the integrating sphere 18 C.3 Goniophotometric measuremen
26、ts 19 Annex D (informative) Tests of robustness of terminations and connectors 20 D.1 General . 20 D.2 Wire terminations and pin type connectors 20 BS EN 62922:2017IEC 62922:2016 IEC 2016 3 D.2.1 General . 20 D.2.2 Tensile test 20 D.2.3 Bending test 20 D.2.4 Torsion test . 20 D.3 Flexible flat termi
27、nations . 20 D.3.1 General . 20 D.3.2 Peel test A . 21 D.3.3 Peel test B . 21 D.4 Soldering 21 Annex E (informative) Information for controlgear design 22 E.1 General . 22 E.2 Operation 22 E.3 Characteristics of the driver output current 22 E.4 Characteristics of the driver output voltage . 23 E.5 D
28、imming . 23 E.6 Short-circuit protection 23 Annex F (informative) Information for luminaire design 24 Bibliography 25 Figure C.1 4 geometry (left), 2 geometry sphere (centre) and 2 geometry hemisphere (right). 18 Figure D.1 Schematic diagram of peel test A 21 Figure E.1 Voltage and luminance behavio
29、ur at constant current operation 22 Table 1 Contents and location of marking 9 Table B.1 Chromaticity coordinates for all viewing angles between 0 and 80 in 5 steps. 16 Table B.2 Colour difference between all chromaticity coordinate pairs . 17 BS EN 62922:2017 4 IEC 62922:2016 IEC 2016 INTERNATIONAL
30、 ELECTROTECHNICAL COMMISSION _ ORGANIC LIGHT EMITTING DIODE (OLED) PANELS FOR GENERAL LIGHTING PERFORMANCE REQUIREMENTS FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Co
31、mmittees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Ava
32、ilable Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental o
33、rganizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technic
34、al matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC
35、National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformi
36、ty, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC
37、 itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure t
38、hat they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any n
39、ature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referen
40、ced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. Internat
41、ional Standard IEC 62922 has been prepared by subcommittee 34A: Lamps, of IEC technical committee 34: Lamps and related equipment. The text of this standard is based on the following documents: FDIS Report on voting 34A/1942/FDIS 34A/1956/RVD Full information on the voting for the approval of this I
42、nternational Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. In this standard, the following print types are used: requirements: roman type, BS EN 62922:2017IEC 62922:2016 IEC 2016 5 test sp
43、ecifications: italic type, notes: smaller roman type. The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific document. At this date, the document will b
44、e reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document u
45、sing a colour printer. BS EN 62922:2017 6 IEC 62922:2016 IEC 2016 ORGANIC LIGHT EMITTING DIODE (OLED) PANELS FOR GENERAL LIGHTING PERFORMANCE REQUIREMENTS 1 Scope This document specifies the performance requirements of OLED tiles and panels for use on DC supplies up to 120 V or AC supplies up to 50
46、V at 50 Hz or 60 Hz for indoor and similar general lighting purposes. NOTE In this current edition, life (life time and maintained values) is not addressed. This is intended to be covered in a future amendment. 2 Normative references The following documents are referred to in the text in such a way
47、that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050-845, International Electrotechnical Vocabulary. Light
48、ing (available at http:/www.electropedia.org) IEC 62868, Organic light emitting diode (OLED) panels for general lighting Safety requirements IEC TR 62732, Three-digit code for designation of colour rendering and correlated colour temperature IEC TS 62972, General lighting Organic light emitting diod
49、e (OLED) products and related equipment Terms and definitions ISO 11664-5/CIE S 014-5/E:2009, Colorimetry Part 5: CIE 1976 L*u*v* Colour space and u, v uniform chromaticity scale diagram CIE 013.3:1995, Method of measuring and specifying colour rendering properties of light sources CIE TN 001:2014, Chromaticity difference specification for light source 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 6
