1、Power sources for a wireless communication devicePart 3: Generic energy harvesting adapter module (IEC 62952-3:2017)BS EN 62952-3:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62952-3 September 2017 ICS 29.22
2、0.10; 33.040.40 English Version Power sources for a wireless communication device - Part 3: Generic energy harvesting adaptor module (IEC 62952-3:2017) Sources dnergie pour un appareil de communication sans fil - Partie 3: Module gnrique dadaptateur de rcupration dnergie (IEC 62952-3:2017) Energiequ
3、ellen fr ein Funkkommunikationsgert - Teil 3: Generisches Energy-Harvesting Adaptermodul (IEC 62952-3:2017) This European Standard was approved by CENELEC on 2017-07-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europ
4、ean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official vers
5、ions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical com
6、mittees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, S
7、lovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017
8、 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62952-3:2017 E National forewordThis British Standard is the UK implementation of EN 62952-3:2017. It is identical to IEC 62952-3:2017.The UK participation in its preparation was entr
9、usted to Technical Committee GEL/65/2, Elements of systems.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The
10、 British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 92074 5ICS 29.220.10; 33.040.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Commi
11、ttee on 31 October 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 629523:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62952-3 September 2017 ICS 29.220.10; 33.040.40 English Version Power sources for a wireless communication device - Part 3: Ge
12、neric energy harvesting adaptor module (IEC 62952-3:2017) Sources dnergie pour un appareil de communication sans fil - Partie 3: Module gnrique dadaptateur de rcupration dnergie (IEC 62952-3:2017) Energiequellen fr ein Funkkommunikationsgert - Teil 3: Generisches Energy-Harvesting Adaptermodul (IEC
13、62952-3:2017) This European Standard was approved by CENELEC on 2017-07-24. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bi
14、bliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the
15、responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia,
16、Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committ
17、ee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELE
18、C Members. Ref. No. EN 62952-3:2017 E BS EN 629523:2017EN 62952-3:2017 2 European foreword The text of document 65B/1080/FDIS, future edition 1 of IEC 62952-3, prepared by SC 65B “Measurement and control devices“, of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to
19、 the IEC-CENELEC parallel vote and approved by CENELEC as EN 62952-3:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-04-24 latest date by which the national st
20、andards conflicting with the document have to be withdrawn (dow) 2020-07-24 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice Th
21、e text of the International Standard IEC 62952-3:2017 was approved by CENELEC as a European Standard without any modification. BS EN 629523:2017EN 62952-3:2017 2 European foreword The text of document 65B/1080/FDIS, future edition 1 of IEC 62952-3, prepared by SC 65B “Measurement and control devices
22、“, of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62952-3:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical
23、national standard or by endorsement (dop) 2018-04-24 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-07-24 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not
24、 be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62952-3:2017 was approved by CENELEC as a European Standard without any modification. EN 62952-3:2017 3 Annex ZA (normative) Normative references to international publica
25、tions with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the
26、referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available
27、 here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60304 - Standard colours for insulation for low-frequency cables and wires HD 402 S2 - IEC 61076-2-101 - Connectors for electronic equipment - Product requirements - Part 2-101: Circular connectors - Detail specification for M12 connectors
28、 with screw-locking EN 61076-2-101 - IEC 62952-1 2016 Power sources for a wireless communication device - Part 1: General requirements of power modules EN 62952-1 2016 BS EN 629523:2017This page deliberately left blank 2 IEC 62952-3:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 No
29、rmative references 7 3 Terms, definitions, abbreviated terms, acronyms and conventions . 7 3.1 Terms and definitions 7 3.2 Abbreviated terms and acronyms 7 3.3 Convention for capitalizations . 8 3.4 Convention for profiles 8 4 Specific requirements for power sources with energy harvesting . 9 4.1 Ge
30、neral . 9 4.2 GEHAM and energy harvester . 9 4.3 Mechanical requirements 9 4.3.1 Connector 9 4.3.2 Flying lead . 9 4.3.3 Cable specification 10 4.3.4 Enclosure shape 10 4.4 Electrical characteristics . 10 4.4.1 General . 10 4.4.2 Input rating of GEHAM . 10 4.4.3 Output rating of GEHAM 10 4.4.4 Prote
31、ctions 10 4.5 Communication interface. 10 5 Profile for power modules with energy harvesting 10 Annex A (informative) Mechanical options 12 Annex B (normative) Cable and connector specification . 15 B.1 General requirements . 15 B.2 Pin 1, Ground . 16 B.3 Pin 2, Digital communication interface 16 B.
32、4 Pin 3, DC power (positive) 17 B.5 Pin 4, Sense . 17 B.6 Pin 5, Reserved 17 Bibliography 18 Figure A.1 Option 1: Fixed connection on energy harvester, connector on GEHAM . 12 Figure A.2 Option 2: Connectors on both energy harvester and GEHAM . 12 Figure A.3 Option 3: Cable fixed on energy harvester
33、, Flying Lead to GEHAM 13 Figure A.4 Option 4: Connector on energy harvester end, Flying Lead connection to GEHAM 13 Figure A.5 Option 5: Flying-lead interface on energy harvester, flying-lead interface on GEHAM side 13 Figure A.6 GEHAM is inside, energy harvester is outside of WCD . 14 Figure A.7 G
34、EHAM and energy harvester are outside of WCD, it supplies to built-in power source 14 Figure B.1 M12 male 15 2 IEC 62952-3:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms, definitions, abbreviated terms, acronyms and conventions . 7 3.1 Terms and defin
35、itions 7 3.2 Abbreviated terms and acronyms 7 3.3 Convention for capitalizations . 8 3.4 Convention for profiles 8 4 Specific requirements for power sources with energy harvesting . 9 4.1 General . 9 4.2 GEHAM and energy harvester . 9 4.3 Mechanical requirements 9 4.3.1 Connector 9 4.3.2 Flying lead
36、 . 9 4.3.3 Cable specification 10 4.3.4 Enclosure shape 10 4.4 Electrical characteristics . 10 4.4.1 General . 10 4.4.2 Input rating of GEHAM . 10 4.4.3 Output rating of GEHAM 10 4.4.4 Protections 10 4.5 Communication interface. 10 5 Profile for power modules with energy harvesting 10 Annex A (infor
37、mative) Mechanical options 12 Annex B (normative) Cable and connector specification . 15 B.1 General requirements . 15 B.2 Pin 1, Ground . 16 B.3 Pin 2, Digital communication interface 16 B.4 Pin 3, DC power (positive) 17 B.5 Pin 4, Sense . 17 B.6 Pin 5, Reserved 17 Bibliography 18 Figure A.1 Option
38、 1: Fixed connection on energy harvester, connector on GEHAM . 12 Figure A.2 Option 2: Connectors on both energy harvester and GEHAM . 12 Figure A.3 Option 3: Cable fixed on energy harvester, Flying Lead to GEHAM 13 Figure A.4 Option 4: Connector on energy harvester end, Flying Lead connection to GE
39、HAM 13 Figure A.5 Option 5: Flying-lead interface on energy harvester, flying-lead interface on GEHAM side 13 Figure A.6 GEHAM is inside, energy harvester is outside of WCD . 14 Figure A.7 GEHAM and energy harvester are outside of WCD, it supplies to built-in power source 14 Figure B.1 M12 male 15 B
40、S EN 629523:2017IEC 62952-3:2017 IEC 2017 3 Figure B.2 M12 female . 16 Figure B.3 Flying lead 16 Table 1 Layout of profile (sub)clause selection tables 8 Table 2 Contents of (sub)clause selection tables . 8 Table 3 General power module profile selection . 11 Table 4 Power Module Type C profile selec
41、tion 11 BS EN 629523:2017IEC 62952-3:2017 IEC 2017 3 Figure B.2 M12 female . 16 Figure B.3 Flying lead 16 Table 1 Layout of profile (sub)clause selection tables 8 Table 2 Contents of (sub)clause selection tables . 8 Table 3 General power module profile selection . 11 Table 4 Power Module Type C prof
42、ile selection 11 4 IEC 62952-3:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ POWER SOURCES FOR A WIRELESS COMMUNICATION DEVICE Part 3: Generic energy harvesting adapter module FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization
43、comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International
44、Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this
45、preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two or
46、ganizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the fo
47、rm of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpret
48、ation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or r
49、egional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability
