1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Environmental testingPart 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/ humidity chambersBS EN IEC 60068-3-6:2018Incorporating corrigendum May 2018EUROPEAN STANDARD NORME E
2、UROPENNE EUROPISCHE NORM EN IEC 60068-3-6 March 2018 ICS 19.040 Supersedes EN 60068-3-6:2002 English Version Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers (IEC 60068-3-6:2018) Essais denvironnement - Partie
3、3-6: Documentation daccompagnement et guide - Confirmation des performances des chambres dessais en temprature et humidit (IEC 60068-3-6:2018) Umweltprfungen - Teil 3-6: Untersttzende Dokumentation und Leitfaden - Besttigung des Leistungvermgens von Temperatur-/Klimaprfkammern (IEC 60068-3-6:2018) T
4、his European Standard was approved by CENELEC on 2018-02-27. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical r
5、eferences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility
6、of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former
7、 Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrot
8、echnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
9、Ref. No. EN IEC 60068-3-6:2018 E National forewordThis British Standard is the UK implementation of EN IEC 60068-3-6:2018, incorporating corrigendum May 2018. It is identical to IEC 60068-3-6:2018. It supersedes BS EN 60068-3-6:2002, which will be withdrawn on 27 February 2021.The UK participation i
10、n its preparation was entrusted to Technical Committee GEL/104, Environmental conditions, classification and testing.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contra
11、ct. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 539 01054 1ICS 19.040Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authorit
12、y of the Standards Policy and Strategy Committee on 30 April 2018.Amendments/corrigenda issued since publicationDate Text affected31 May 2018 Implementation of CENELEC corrigendum May 2018: date of publication (dop) in European fore-word correctedBRITISH STANDARDBS EN IEC 60068-3-6:2018EUROPEAN STAN
13、DARD NORME EUROPENNE EUROPISCHE NORM EN IEC 60068-3-6 March 2018 ICS 19.040 Supersedes EN 60068-3-6:2002 English Version Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers (IEC 60068-3-6:2018) Essais denvironneme
14、nt - Partie 3-6: Documentation daccompagnement et guide - Confirmation des performances des chambres dessais en temprature et humidit (IEC 60068-3-6:2018) Umweltprfungen - Teil 3-6: Untersttzende Dokumentation und Leitfaden - Besttigung des Leistungvermgens von Temperatur-/Klimaprfkammern (IEC 60068
15、-3-6:2018) This European Standard was approved by CENELEC on 2018-02-27. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibli
16、ographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the res
17、ponsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Fin
18、land, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee
19、for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENEL
20、EC Members. Ref. No. EN IEC 60068-3-6:2018 E BS EN IEC 60068-3-6:2018EN IEC 60068-3-6:2018 (E) 2 European foreword The text of document 104/760/FDIS, future edition 2 of IEC 60068-3-6, prepared by IEC/TC 104 “Environmental conditions, classification and methods of test“ was submitted to the IEC-CENE
21、LEC parallel vote and approved by CENELEC as EN IEC 60068-3-6:2018. The following dates are fixed: latest date by which the document has to beimplemented at national level bypublication of an identical nationalstandard or by endorsement(dop) 2018-11-27 latest date by which the nationalstandards conf
22、licting with thedocument have to be withdrawn(dow) 2021-02-27 This document supersedes EN 60068-3-6:2002. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent
23、 rights. Endorsement notice The text of the International Standard IEC 60068-3-6:2018 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068-1 NOTE Harmonized as E
24、N 60068-1. IEC 60068-3-4 NOTE Harmonized as EN 60068-3-4. IEC 60584-1 NOTE Harmonized as EN 60584-1. IEC 60751 NOTE Harmonized as EN 60751. ISO 10012 NOTE Harmonized as EN ISO 10012. BS EN IEC 60068-3-6:2018EN IEC 60068-3-6:2018 (E) 3 Annex ZA (normative) Normative references to international public
25、ations with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the
26、 referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is availab
27、le here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60068-3-5 2001 Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers EN 60068-3-5 2002 IEC 60068-3-7 2001 Environmental testing - Part 3-7: Supporting documentat
28、ion and guidance - Measurements in temperature chambers for tests A and B (with load) EN 60068-3-7 2002 IEC 60068-3-11 2007 Environmental testing - Part 3-11: Supporting documentation and guidance - Calculation of the uncertainty of conditions in climatic test chambers EN 60068-3-11 2007 BS EN IEC 6
29、0068-3-6:2018This page deliberately left blank 2 IEC 60068-3-6:2018 IEC 2018 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 4 Measuring of performances . 9 4.1 Test area environment 9 4.2 Measurement system 9 4.3 Temperature measurement system . 9
30、 4.4 Humidity measurement system . 9 4.5 Temperature/humidity chamber test specimens . 10 4.6 Specified location of temperature sensors and humidity sensor in working space 10 4.6.1 General . 10 4.6.2 Temperature sensors . 11 4.6.3 Humidity sensor . 11 4.7 Measurement method . 11 4.7.1 General . 11
31、4.7.2 Achieved humidity . 11 4.7.3 Temperature/humidity stabilization 12 4.7.4 Humidity fluctuation . 12 4.7.5 Humidity gradient. 13 4.7.6 Humidity variation in space 14 4.8 Standard humidity sequence . 15 5 Information to be given in the performance test report . 16 Bibliography 17 Figure 1 Example
32、 of humidity differences . 8 Figure 2 Working space . 8 Figure 3 Location sensors for temperature/humidity chambers up to 2 000 l. 10 Figure 4 Location of minimal additional sensors for temperature/humidity chambers over 2 000 l . 11 Figure 5 Example of achieved humidity 12 Figure 6 Example of tempe
33、rature/humidity stabilization 12 Figure 7 Example of humidity fluctuation 13 Figure 8 Example of humidity gradient for chambers up to 2 000 l 14 Figure 9 Example of humidity variation in space for chambers up to 2000 l 15 Figure 10 Example of climatogram . 16 Table 1 Practical dimensions . 9 Table 2
34、 Example of test sequence . 15 2 IEC 60068-3-6:2018 IEC 2018 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 4 Measuring of performances . 9 4.1 Test area environment 9 4.2 Measurement system 9 4.3 Temperature measurement system . 9 4.4 Humidity me
35、asurement system . 9 4.5 Temperature/humidity chamber test specimens . 10 4.6 Specified location of temperature sensors and humidity sensor in working space 10 4.6.1 General . 10 4.6.2 Temperature sensors . 11 4.6.3 Humidity sensor . 11 4.7 Measurement method . 11 4.7.1 General . 11 4.7.2 Achieved h
36、umidity . 11 4.7.3 Temperature/humidity stabilization 12 4.7.4 Humidity fluctuation . 12 4.7.5 Humidity gradient. 13 4.7.6 Humidity variation in space 14 4.8 Standard humidity sequence . 15 5 Information to be given in the performance test report . 16 Bibliography 17 Figure 1 Example of humidity dif
37、ferences . 8 Figure 2 Working space . 8 Figure 3 Location sensors for temperature/humidity chambers up to 2 000 l. 10 Figure 4 Location of minimal additional sensors for temperature/humidity chambers over 2 000 l . 11 Figure 5 Example of achieved humidity 12 Figure 6 Example of temperature/humidity
38、stabilization 12 Figure 7 Example of humidity fluctuation 13 Figure 8 Example of humidity gradient for chambers up to 2 000 l 14 Figure 9 Example of humidity variation in space for chambers up to 2000 l 15 Figure 10 Example of climatogram . 16 Table 1 Practical dimensions . 9 Table 2 Example of test
39、 sequence . 15 BS EN IEC 60068-3-6:2018IEC 60068-3-6:2018 IEC 2018 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ENVIRONMENTAL TESTING Part 3-6: Supporting documentation and guidance Confirmation of the performance of temperature/humidity chambers FOREWORD 1) The International Electrotechnical Commi
40、ssion (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and i
41、n addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee i
42、nterested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordanc
43、e with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interes
44、ted IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsibl
45、e for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence bet
46、ween any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of c
47、onformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and m
48、embers of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publicatio
49、n or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60068-3-6 has be
