1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Impulse tests on cables and their accessoriesBS EN IEC 60230:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 60230 March 2018 ICS 29.060.20 Supersedes EN 60230:2002 English Version Impulse tests on cables a
2、nd their accessories (IEC 60230:2018) Essais de choc des cbles et de leurs accessoires (IEC 60230:2018) Stospannungsprfungen an Kabeln und deren Garnituren (IEC 60230:2018) This European Standard was approved by CENELEC on 2018-02-14. CENELEC members are bound to comply with the CEN/CENELEC Internal
3、 Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN
4、ELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the officia
5、l versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Mal
6、ta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-
7、CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 60230:2018 E National forewordThis British Standard is the UK implementation of EN IEC 60230:2018. It is ident
8、ical to IEC 60230:2018. It supersedes BS EN 60230:2002, which will be withdrawn on 14 February 2021.The UK participation in its preparation was entrusted to Technical Committee GEL/20/16, Electric Cables - Medium/high voltage.A list of organizations represented on this committee can be obtained on r
9、equest to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 84672 4ICS 29.060.20Compliance with a Briti
10、sh Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 April 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 60230:2018EUROPEAN STANDARD NORM
11、E EUROPENNE EUROPISCHE NORM EN IEC 60230 March 2018 ICS 29.060.20 Supersedes EN 60230:2002 English Version Impulse tests on cables and their accessories (IEC 60230:2018) Essais de choc des cbles et de leurs accessoires (IEC 60230:2018) Stospannungsprfungen an Kabeln und deren Garnituren (IEC 60230:2
12、018) This European Standard was approved by CENELEC on 2018-02-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliograph
13、ical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsib
14、ility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland,
15、Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for El
16、ectrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Mem
17、bers. Ref. No. EN IEC 60230:2018 E BS EN IEC 60230:2018EN IEC 60230:2018 (E) 2 European foreword The text of document 20/1769A/FDIS, future edition 2 of IEC 60230, prepared by IEC/TC 20 “Electric cables“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 60230:2018. The
18、 following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-11-14 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-02-14 Th
19、is document supersedes EN 60230:2002. Endorsement notice The text of the International Standard IEC 60230:2018 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 60060-
20、2 NOTE Harmonized as EN 60060-2. BS EN IEC 60230:2018EN IEC 60230:2018 (E) 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content cons
21、titutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mo
22、d), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60060-1 2010 High-voltage test techniques - Part 1: General definitions and test requirements E
23、N 60060-1 2010 BS EN IEC 60230:2018 2 IEC 60230:2018 IEC 2018 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions 5 4 Characteristics of the test object to be subjected to the tests . 5 5 State of the test object to be subjected to the test . 6 6 Lightning impulse voltag
24、e 6 7 Switching impulse voltage . 6 8 Superimposed impulse voltage test . 6 8.1 General . 6 8.2 Test setup . 6 8.3 Time parameters . 7 8.4 Application of the DC voltage 7 9 Measuring system . 7 10 Application of the impulses 7 Annex A (informative) Tests above the withstand level . 8 A.1 General . 8
25、 A.2 Procedure for tests above the withstand level . 8 A.2.1 General sequence of lightning-impulse tests 8 A.2.2 Tests beyond withstand level . 8 A.2.3 Re-calibration of the generator 8 Annex B (normative) Calibration of impulse generator 9 B.1 General . 9 B.2 Calibration of impulse generator . 9 B.
26、3 Application of the impulses at the level specified 9 Annex C (normative) Test circuits for superimposed impulse voltage test 10 C.1 General . 10 Bibliography 12 Figure C.1 Spark gap setup using calibrated composite measuring system capable of measuring HVDC and impulse 10 Figure C.2 Blocking capac
27、itor setup using calibrated composite measuring system capable of measuring HVDC and impulse . 11 BS EN IEC 60230:2018IEC 60230:2018 IEC 2018 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ IMPULSE TESTS ON CABLES AND THEIR ACCESSORIES FOREWORD 1) The International Electrotechnical Commission (IEC) is
28、 a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to
29、other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in t
30、he subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditi
31、ons determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC Nation
32、al Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way
33、in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC P
34、ublication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC
35、 is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its
36、technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other
37、 IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the s
38、ubject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60230 has been prepared by IEC technical committee 20: Electric cables. This second edition cancels and replaces the first edition published in 1966. This edition cons
39、titutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the structure of the standard takes into account the current style of IEC standards; b) this document is no longer a “Recommendation” but an “International Standar
40、d”; c) the test installation is no longer related to gas-pressure and oil-filled cables only; d) switching-impulse voltage and superimposed impulse voltage tests have been included; e) for the measuring system the reference to IEC 60060-2 has been added. The reference to the sphere gap method has be
41、en moved to Annex B. BS EN IEC 60230:2018 4 IEC 60230:2018 IEC 2018 The text of this standard is based on the following documents: FDIS Report on voting 20/1769A/FDIS 20/1779/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the ab
42、ove table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specifi
43、c publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. BS EN IEC 60230:2018IEC 60230:2018 IEC 2018 5 IMPULSE TESTS ON CABLES AND THEIR ACCESSORIES 1 Scope This docu
44、ment defines the procedure for carrying out withstand lightning and switching impulse tests and withstand superimposed impulse test on cables and their accessories. This document applies solely to the methods of carrying out the tests as such, independently of the problem of selecting the test level
45、s to be specified. The voltages pertaining to the system on which cables and accessories are to be used are given in IEC 60183 or in the relevant product standard. This document specifies the following requirements: the characteristics and state of the test installation and those parts of the proced
46、ure which are common to withstand tests and tests above the withstand level; the procedure for carrying out withstand lightning and switching impulse tests and superimposed impulse test; the procedure for carrying out tests above the withstand level which is intended for research purposes. 2 Normati
47、ve references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amen
48、dments) applies. IEC 60060-1:2010, High-voltage test techniques Part 1: General definitions and test requirements 3 Terms and definitions For the purposes of this document, the terms and definitions given in the relevant product standards and the following apply. ISO and IEC maintain terminological
49、databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp 3.1 superimposed impulse voltage impulse voltage applied to a test object which is at the same time energized by a DC voltage Note 1 to entry: The superimposed impulse voltage falls under the definition of composite voltage given in IEC 60060-1:2010, 9.2. 4 Characteristics of the test object to be subjected to
