1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Heat shrinkable low and medium voltage moulded shapesPart 1: General requirements (IEC 62677-1:2017)BS EN IEC 62677-1:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62677-1 February 2018 ICS 29.035.01; 29.
2、035.20 English Version Heat shrinkable low and medium voltage moulded shapes - Part 1: General requirements (IEC 62677-1:2017) Profils thermortractables basse et moyenne tensions - Partie 1: Exigences gnrales (IEC 62677-1:2017) Wrmeschrumpfende Nieder- und Mittelspannungsformteile - Teil 1: Allgemei
3、ne Anforderungen (IEC 62677-1:2017) This European Standard was approved by CENELEC on 2017-11-15. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. U
4、p-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by
5、translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republ
6、ic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kin
7、gdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means res
8、erved worldwide for CENELEC Members. Ref. No. EN IEC 62677-1:2018 E National forewordThis British Standard is the UK implementation of EN IEC 626771:2018. It is identical to IEC 626771:2017.The UK participation in its preparation was entrusted to Technical Committee GEL/15/5, Flexible insulating sle
9、eving for electrical purposes.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institutio
10、n 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 79813 9ICS 29.035.20; 29.035.01Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2018.Amen
11、dments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 626771:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62677-1 February 2018 ICS 29.035.01; 29.035.20 English Version Heat shrinkable low and medium voltage moulded shapes - Part 1: General requirement
12、s (IEC 62677-1:2017) Profils thermortractables basse et moyenne tensions - Partie 1: Exigences gnrales (IEC 62677-1:2017) Wrmeschrumpfende Nieder- und Mittelspannungsformteile - Teil 1: Allgemeine Anforderungen (IEC 62677-1:2017) This European Standard was approved by CENELEC on 2017-11-15. CENELEC
13、members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on appli
14、cation to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CEN
15、ELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Ic
16、eland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechni
17、que Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 62677-1:2018 E BS EN IEC 626771:2018EN IEC 62677-1:20
18、18 (E) 2 European foreword The text of document 15/806/FDIS, future edition 1 of IEC 62677-1, prepared by IEC/TC 15 “Solid electrical insulating materials“, was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62677-1:2018. The following dates are fixed: latest date by wh
19、ich the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-08-15 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-11-15 Attention is drawn to the possibility that some
20、 of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62677-1:2017 was approved by CENELEC as a European Standard without any
21、 modification. In the official version, for Bibliography, the following note has to be added for the standard indicated : IEC 62677-2 NOTE Harmonized as EN IEC 62677-2. BS EN IEC 626771:2018EN IEC 62677-1:2018 (E) 3 Annex ZA (normative) Normative references to international publications with their c
22、orresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (includi
23、ng any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publi
24、cation Year Title EN/HD Year IEC 60050 series International electrotechnical vocabulary - series IEC 60050-212 AMD 1 AMD 2 2010 2015 2015 International Electrotechnical Vocabulary - Part-212: Electrical insulating solids, liquids and gases - - BS EN IEC 626771:2018This page deliberately left blank 2
25、 IEC 62677-1:2017 IEC 2017 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references . 6 3 Terms and definitions. 6 4 Moulded shape material specimens 7 5 Classification . 7 6 Ordering 7 7 Dimensions 7 8 Colour . 7 9 Finish 7 10 Packaging 7 11 Labelling 8 12 Qualification approval requ
26、irements . 8 13 Consignment tests . 8 Annex A (informative) Heat shrinkable moulded parts (typical configuration) . 9 Bibliography 10 Figure A.1 Typical configuration of heat shrinkable moulded parts 9 2 IEC 62677-1:2017 IEC 2017 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative reference
27、s . 6 3 Terms and definitions. 6 4 Moulded shape material specimens 7 5 Classification . 7 6 Ordering 7 7 Dimensions 7 8 Colour . 7 9 Finish 7 10 Packaging 7 11 Labelling 8 12 Qualification approval requirements . 8 13 Consignment tests . 8 Annex A (informative) Heat shrinkable moulded parts (typica
28、l configuration) . 9 Bibliography 10 Figure A.1 Typical configuration of heat shrinkable moulded parts 9 BS EN IEC 626771:2018IEC 62677-1:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES Part 1: General requirements FOREWORD 1) The Int
29、ernational Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and ele
30、ctronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committ
31、ees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for S
32、tandardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee ha
33、s representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accura
34、te, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional
35、 publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in som
36、e areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents i
37、ncluding individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or r
38、eliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of th
39、e elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62677-1 has been prepared by IEC technical committee 15: Solid electrical insulating materials. The text of this standar
40、d is based on the following documents: FDIS Report on voting 15/806/FDIS 15/810/RVD Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directiv
41、es, Part 2. BS EN IEC 626771:2018 4 IEC 62677-1:2017 IEC 2017 A list of all parts in the IEC 62677 series, published under the general title Heat shrinkable low and medium voltage moulded shapes, can be found on the IEC website. The committee has decided that the contents of this document will remai
42、n unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific document. At this date, the document will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN IEC 626771:2018IEC 62677-1:2017 IEC 2017 5 INTRODU
43、CTION This part of IEC 62677 is one of a series which deals with heat shrinkable low and medium voltage moulded shapes. The series consists of three parts: Part 1: General requirements (IEC 62677-1) Part 2: Methods of test (IEC 62677-21) Part 3: Material requirements (IEC 62677-3-1012, IEC 62677-3-1
44、023and IEC 62677-3-1034) _ 1Under preparation. Stage at the time of publication: IEC RFDIS IEC 62677-2:2017. 2Under preparation. Stage at the time of publication: IEC AFDIS IEC 62677-3-101:2017. 3Under preparation. Stage at the time of publication: IEC AFDIS IEC 62677-3-102:2017. 4Under preparation.
45、 Stage at the time of publication: IEC ACDV IEC 62677-3-103:2017. BS EN IEC 626771:2018 6 IEC 62677-1:2017 IEC 2017 HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES Part 1: General requirements 1 Scope This document is applicable to heat shrinkable low and medium voltage moulded shapes in a ran
46、ge of configurations and materials suitable for insulation, environmental sealing, mechanical protection, electrical conductance, anti-tracking and strain relief for power cable terminations, joints and stop ends. It specifies the test methods and material requirements. The most commonly available s
47、hapes are as shown in the Annex A. Materials which conform to this document meet established levels of performance. However, the selection of a material by a user for a specific application will be based on the actual requirements necessary for adequate performance in that application and will not b
48、e based on this document alone. These moulded shapes are designed to be used in low and medium voltage cable accessories and as such electrical performance will be proven as part of the assembly. Examples of this are described in EN 50393, HD 629.1 and IEC 60502-4. 2 Normative references The followi
49、ng documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050 (all parts), International Electrotechnical Vocabulary (available at http:/www.electropedia.org) IEC 60050-212:2010, International Electrotechnical Vocabulary - Part 212: Elec
