1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN ISO 9444-2:2010Continuously hot-rolledstainless steel Tolerances ondimensions and formPart 2: Wide strip and sheet/plate (ISO9444-2:2009)BS EN ISO 9444-2:2010 BRITISH STAND
2、ARDNational forewordThis British Standard is the UK implementation of EN ISO9444-2:2010. It is identical to ISO 9444-2:2009.The UK participation in its preparation was entrusted to TechnicalCommittee ISE/105, Steels for Heat Treatment, Alloy Steels, Free-Cutting Steels and Stainless Steels.A list of
3、 organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. BSI 2010ISBN 978 0 580 70753 7ICS 77.140.20; 77.140.50Compliance with a Br
4、itish Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2010Amendments issued since publicationDate Text affectedEUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 9444-2 June 2
5、010 ICS 77.140.20; 77.140.50 English Version Continuously hot-rolled stainless steel - Tolerances on dimensions and form - Part 2: Wide strip and sheet/plate (ISO 9444-2:2009) Acier inoxydable lamin chaud en continu - Tolrances sur les dimensions et la forme - Partie 2: Larges bandes et tles (ISO 94
6、44-2:2009) Kontinuierlich warmgewalzter nichtrostender Stahl - Grenzabmae und Formtoleranzen - Teil 2: Warmbreitband und Blech (ISO 9444-2:2009) This European Standard was approved by CEN on 20 May 2010. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the co
7、nditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member. This European Standard exists in t
8、hree official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions. CEN members are the national standards bodies o
9、f Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom
10、. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG Management Centre: Avenue Marnix 17, B-1000 Brussels 2010 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 9444-2:2010: EBS E
11、N ISO 9444-2:2010EN ISO 9444-2:2010 (E) 3 Foreword The text of ISO 9444-2:2009 has been prepared by Technical Committee ISO/TC 17 “Steel” of the International Organization for Standardization (ISO) and has been taken over as EN ISO 9444-2:2010 by Technical Committee ECISS/TC 105 “Steels for heat tre
12、atment, alloy steels, free-cutting steels and stainless steels” the secretariat of which is held by DIN. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by December 2010, and conflicting national sta
13、ndards shall be withdrawn at the latest by December 2010. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and/or CENELEC shall not be held responsible for identifying any or all such patent rights. According to the CEN/CENELEC
14、 Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
15、Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. Endorsement notice The text of ISO 9444-2:2009 has been approved by CEN as a EN ISO 9444-2:2010 without any modification. BS EN ISO 9444-2:2010ISO 9444-2:2009(E)
16、ISO 2009 All rights reserved iiiContents Page Foreword iv 1 Scope . 1 2 Normative references . 1 3 Terms and definitions. 1 4 Information to be supplied by the purchaser 2 5 Type of delivery and delivery condition . 3 6 Tolerances on thickness for hot-rolled wide strip and sheet/plate . 3 7 Toleranc
17、es on width for hot-rolled wide strip and sheet/plate 4 8 Tolerances on length for sheet/plate 4 9 Tolerances on edge camber for hot-rolled wide strip and sheet/plate . 5 10 Tolerances on squareness for sheet/plate. 5 11 Tolerances on flatness for sheet/plate . 5 12 Form of coils . 5 13 Ordered form
18、at for sheet/plate 5 14 Measurement of thickness for hot-rolled wide strip and sheet/plate 6 15 Measurement of width 6 16 Measurement of length. 6 17 Measurement of edge camber . 6 18 Measurement of squareness . 7 19 Measurement of flatness 7 Bibliography . 8 BS EN ISO 9444-2:2010ISO 9444-2:2009(E)
19、iv ISO 2009 All rights reservedForeword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body intere
20、sted in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical
21、Commission (IEC) on all matters of electrotechnical standardization. International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2. The main task of technical committees is to prepare International Standards. Draft International Standards adopted by the tec
22、hnical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO
23、 shall not be held responsible for identifying any or all such patent rights. ISO 9444-2 was prepared by Technical Committee ISO/TC 17, Steel, Subcommittee SC 4, Heat treatable and alloy steels. This first edition of ISO 9444-2 cancels and replaces the second edition of ISO 9444:2002, the contents o
24、f which has been technically revised and separated into two parts. ISO 9444 consists of the following parts, under the general title Continuously hot-rolled stainless steel Tolerances on dimensions and form: Part 1: Narrow strip and cut lengths Part 2: Wide strip and sheet/plate BS EN ISO 9444-2:201
25、0INTERNATIONAL STANDARD ISO 9444-2:2009(E) ISO 2009 All rights reserved 1Continuously hot-rolled stainless steel Tolerances on dimensions and form Part 2: Wide strip and sheet/plate 1 Scope This part of ISO 9444 specifies the tolerances on dimensions and form for continuously hot-rolled stainless st
26、eel wide strip in actual widths from 600 mm to 2 500 mm and for sheet/plate cut from such strip. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest
27、edition of the referenced document (including any amendments) applies. ISO 6929:1987, Steel products Definitions and classification 3 Terms and definitions For the purposes of this document, the terms and definitions given in ISO 6929 and the following apply. 3.1 hot-rolled sheet/plate flat rolled p
28、roduct, the edges being allowed to deform freely, supplied flat and generally square or rectangular, but also in any other shape, for example circular or according to the design sketch; the edges are as-rolled or sheared or flame-cut or chamfered NOTE 1 The product may also be delivered precurved. N
29、OTE 2 Hot-rolled sheet/plate may be produced: a) directly rolled on a reversing mill, or by cutting from a parent plate rolled on a reversing mill; b) by cutting from hot-rolled strip rolled on a continuous mill. NOTE 3 Reversing-mill plate is known generally as “quarto-plate”. Continuous-mill sheet
30、/plate is known generally as “hot-rolled sheet/plate”. NOTE 4 Where further subdivision is required to be made on the basis of thickness for statistical purposes, the following is recommended: a) sheet: thickness less than 3 mm (except electrical sheet); b) plate: thickness equal to or greater than
31、3 mm. NOTE 5 Adapted from ISO 6929:1987, definition 6.2.6.2.2.2. BS EN ISO 9444-2:2010ISO 9444-2:2009(E) 2 ISO 2009 All rights reserved3.2 hot-rolled strip hot-rolled flat product which immediately after the final rolling pass or after pickling or annealing is wound into laps so as to form a coil NO
32、TE 1 Hot-rolled strip as-rolled has slightly convex edges, but it may also be supplied with sheared edges or be obtained by slitting wider hot-rolled strip. ISO 6929:1987, definition 6.2.6.2.2.3.1 NOTE 2 According to its actual width, including hot-rolled slit strips irrespective of the rolling widt
33、h, hot-rolled strip is classified as hot-rolled wide strip: strip of a width equal to or greater than 600 mm, or hot-rolled narrow strip: strip of a width less than 600 mm. After decoiling and cutting to length, hot-rolled narrow strip may be supplied as cut lengths. 4 Information to be supplied by
34、the purchaser 4.1 It shall be the responsibility of the purchaser to specify all requirements that are necessary for products under this specification. Such requirements to be considered include, in the order listed, but not limited to, the following: a) the type of delivery see 5.1 a) and 5.1 b); b
35、) the number of this part of ISO 9444, i.e. ISO 9444-2; c) the thickness, in millimetres (if necessary, accurate to two decimal places); d) the width, in millimetres; e) the condition of the edges (M = mill edges, T = trimmed edges); f) for wide strip see 5.1 a), the condition of the ends R = rolled
36、 (mill) ends, C = cropped ends; g) for sheet/plate, the length, in millimetres; h) any special delivery condition (see 5.2). EXAMPLE 1 Plate in accordance with this International Standard, with a specified thickness of 4,0 mm, a specified width of 1 200 mm, with trimmed edges (T) and a specified len
37、gth of 2 500 mm. Plate ISO 9444-2 4,0 1200T 2500 EXAMPLE 2 Hot-rolled wide strip in accordance with this International Standard, with a specified thickness of 6,0 mm, a specified width of 1 500 mm, with mill edges (M) and mill (rolled = R) ends: Hot-rolled wide strip ISO 9444-2 6,0 1500M-R 4.2 In th
38、e absence of information in the order concerning special requirements for tolerances on dimension and shape see 4.1 c) to 4.1 h), hot-rolled products covered by this part of ISO 9444 will be delivered in accordance with the basic specifications of this part of ISO 9444, i.e. with normal tolerances a
39、nd/or in the usual delivery condition. BS EN ISO 9444-2:2010ISO 9444-2:2009(E) ISO 2009 All rights reserved 35 Type of delivery and delivery condition 5.1 Type of delivery Flat products in accordance with this part of ISO 9444 can be supplied as a) hot-rolled wide strip (strip in actual widths from
40、600 mm to 2 500 mm), or b) hot-rolled sheet/plate cut from hot-rolled wide strip in accordance with 5.1 a); 5.2 Delivery condition 5.2.1 Hot-rolled wide strip and sheet/plate covered by this part of ISO 9444 are supplied in the as-rolled (U) condition, unless the annealed and/or descaled conditions
41、has been agreed upon. 5.2.2 Hot-rolled, or hot-rolled and annealed, wide strip is supplied with mill edges and mill ends. Delivery with trimmed (slit) edges shall be by special agreement. 5.2.3 Annealed and descaled wide strip and sheet/plate are supplied with trimmed (slit) edges and cut ends. 5.3
42、General information In the absence of agreements at the time of enquiry and order concerning special requirements for the delivery condition given in 5.2, flat products covered by this part of ISO 9444 will be delivered in accordance with the basic specifications of this part of ISO 9444. 6 Toleranc
43、es on thickness for hot-rolled wide strip and sheet/plate 6.1 The tolerances on thickness, which include crown, are given in Table 1. Table 1 Tolerances on specified thickness for hot-rolled wide strip and sheet/plate aDimensions in millimetres Specified thickness Tolerances on specified thickness b
44、 for nominal width of t w u 1 400 1 400 13,0 The tolerances have to be agreed upon at the time of enquiry and order. aFor wide strip, the specified values for tolerances shall not apply to the mill ends of the coil for a total length l which is calculated using the formula: ()90mnominal thickness (m
45、m)l = with a maximum total length (both ends) of 20 m per coil. bTrimmed edges or sheared ends may have burrs. BS EN ISO 9444-2:2010ISO 9444-2:2009(E) 4 ISO 2009 All rights reserved6.2 If required for hot-rolled wide strip intended for cold rolling, the difference in thickness throughout one coil sh
46、all not exceed the values given in Table 2. 6.3 If the purchaser requires tolerances on crown tighter than those implicit in the tolerance on thickness, the tolerances on crown shall be subject to agreement between the manufacturer and purchaser, and shall be specified on the purchase order. Table 2
47、 Permitted thickness differences within one coil for hot-rolled wide strip intended for cold rolling Dimensions in millimetres Specified thickness Permitted thickness differences for width of stripat w u 1 200 1 200 10 mm, the upper tolerances shall be agreed upon at the time of enquiry and order. 8
48、 Tolerances on length for sheet/plate The tolerances on length for sheet/plate are given in Table 4. BS EN ISO 9444-2:2010ISO 9444-2:2009(E) ISO 2009 All rights reserved 5Table 4 Length tolerances for sheet/plate Dimensions in millimetres Specified length, l Tolerances l 1 500 38 12 Form of coils Th
49、e coils delivered in accordance with this part of ISO 9444 shall be tightly wound, as round as possible. The edges of the coil are permitted to show a gradual displacement to one side which shall not exceed 35 mm in the case of trimmed (slit) edges and 70 mm in the case of mill (as-rolled) edges. 13 Ordered format for sheet/plate 13.1 Except as described in 13.2, sheet/plate shall conform to the thickness, width, length, edge camber and out-of-squareness tolerances shown in the applicable tables and text
