1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Paints and varnishes Corrosion protection of steel structures by protective paint systemsPart 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018)BS
2、EN ISO 12944-9:2018National forewordThis British Standard is the UK implementation of EN ISO 129449:2018. It is identical to ISO 129449:2018.The UK participation in its preparation was entrusted to Technical Committee STI/21, Paint systems and surface preparation for metallic substrates.A list of or
3、ganizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited
4、2018ISBN 978 0 580 93274 8ICS 87.040Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2018.Amendments/corrigenda issued since publicationDate Text affect
5、edBRITISH STANDARDBS EN ISO 129449:2018EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN ISO 129449February 2018ICS 87.040EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMIT EUROPEN DE NORMALISATIONEUROPISCHES KOMITEE FR NORMUNGCENCENELEC Management Centre: Avenue Marnix 17, B1000 Brussels 2018 CEN Ref. No.
6、 EN ISO 129449:2018: EAll rights of exploitation in any form and by any means reserved worldwide for CEN national MembersPaints and varnishes Corrosion protection of steel structures by protective paint systems Part 9: Protective paint systems and laboratory performance test methods for offshore and
7、 related structures (ISO 129449:2018)Peintures et vernis Anticorrosion des structures en acier par systmes de peinture Partie 9: Systmes de peinture protectrice et mthodes dessai de performance en laboratoire pour la protection des sctructures offshore et structures associes (ISO 129449:2018)Beschic
8、htungsstoffe Korrosionsschutz von Stahlbauten durch Beschichtungssysteme Teil 9: Beschichtungssysteme und Leistungsprfverfahren im Labor fr Bauwerke im Offshorebereich (ISO 129449:2018)This European Standard was approved by CEN on 22 January 2018.CEN members are bound to comply with the CEN/CENELEC
9、Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Uptodate lists and bibliographical references concerning such national standards may be obtained on application to the CENCENELEC Management Centre or to an
10、y CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official ve
11、rsions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
12、 Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.English VersionEN ISO 129449:2018 (E)European forewordThis document (EN ISO 129449:2018) has been prepared by Technical Committee ISO/TC 35 “Paints and varnishes“ in collaboration with Techn
13、ical Committee CEN/TC 139 “Paints and varnishes” the secretariat of which is held by DIN.This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by August 2018, and conflicting national standards shall be wi
14、thdrawn at the latest by August 2018.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.According to the CENCENELEC Internal Regulations, the national st
15、andards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
16、 Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.Endorsement noticeThe text of ISO 129449:2018 has been approved by CEN as EN ISO 129449:2018 without any modification.2BS EN ISO 129449:2018ISO 12
17、9449:2018Foreword ivIntroduction v1 Scope . 12 Normative references 23 Terms and definitions . 34 Field of application 44.1 Type of environment 44.2 Type of surface and surface preparation 54.3 Type of paint . 55 Relationship between artificial ageing and natural exposure 56 Paints 66.1 General . 66
18、.2 Quality assurance 66.3 Packaging and labelling . 66.4 Required product information 66.5 Paint identification 76.5.1 General 76.5.2 Fingerprint check 76.5.3 Routine batch check 86.6 Confidential information 87 Protective paint systems 87.1 Description . 87.2 Minimum requirements for protective pai
19、nt systems 98 Application testing of paints .109 Performance testing of the paint system 119.1 Preparation and conditioning of test panels 119.1.1 Type and size of panel and number of panels .119.1.2 Surface preparation 119.1.3 Application and curing 119.1.4 Dry film thickness 119.1.5 Over-coating t
20、ime .119.1.6 Conditioning/curing 129.1.7 Porosity detection 129.1.8 Scribe line . 129.1.9 Assessment of corrosion 129.2 Qualification tests 129.3 Assessment Methods and requirements 129.3.1 General. 129.3.2 Assessment 1310 Test report 14Annex A (normative) Scribe line for cyclic ageing test and sea
21、water immersion .16Annex B (normative) Cyclic ageing test 18Annex C (normative) Fingerprint .19Annex D (informative) Examples of test reports .20Bibliography .24 ISO 2018 All rights reserved iiiContents PageBS EN ISO 129449:2018ISO 129449:2018ForewordISO (the International Organization for Standardi
22、zation) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to b
23、e represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used t
24、o develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of t
25、he ISO/IEC Directives, Part 2 (see www.iso.org/directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified du
26、ring the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www.iso.org/patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the vo
27、luntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www.iso.org/iso/foreword.html.
28、This document was prepared by Technical Committee ISO/TC 35, Paints and varnishes, Subcommittee SC 14, Protective paint systems for steel structures.This first edition of ISO 129449 cancels and replaces ISO 20340:2009, which has been technically revised.A list of all parts in the ISO 12944 series ca
29、n be found on the ISO website.iv ISO 2018 All rights reservedBS EN ISO 129449:2018ISO 129449:2018IntroductionUnprotected steel in the atmosphere, in water and in soil is subject to corrosion that can lead to damage. Therefore, to avoid corrosion damage, steel structures are normally protected to wit
30、hstand the corrosion stresses to which they will be subjected during the service life required of the structure.There are different ways of protecting steel structures from corrosion. ISO 12944 (all parts) deals with protection by paint systems and covers, in the various parts, all features that are
31、 important in achieving adequate corrosion protection. Additional or other measures are possible but require particular agreement between the interested parties.In order to ensure effective corrosion protection of steel structures, owners of such structures, planners, consultants, companies carrying
32、 out corrosion protection work, inspectors of protective coatings and manufacturers of coating materials need to have at their disposal state-of-the-art information in concise form on corrosion protection by paint systems. It is vital that such information is as complete as possible, unambiguous and
33、 easily understandable to avoid difficulties and misunderstandings between the parties concerned with the practical implementation of protection work.ISO 12944 (all parts) is intended to give this information in the form of a series of instructions. It is written for those who have some technical kn
34、owledge. It is also assumed that the user of ISO 12944 (all parts) is familiar with other relevant International Standards, in particular those dealing with surface preparation.Although ISO 12944 (all parts) does not deal with financial and contractual questions, attention is drawn to the fact that,
35、 because of the considerable implications of inadequate corrosion protection, non-compliance with requirements and recommendations given in this document may result in serious financial consequences.ISO 129441 defines the overall scope of ISO 12944. It gives some basic terms and definitions and a ge
36、neral introduction to the other parts of ISO 12944. Furthermore, it includes a general statement on health, safety and environmental protection, and guidelines for using ISO 12944 (all parts) for a given project.Offshore and related structures require specific attention in order to be able to withst
37、and the severe corrosion stresses to which they are exposed during their service life and to minimize the risk of failures that would impact safety, operating costs or capital cost.In order to establish sufficient corrosion protection and ensure optimum performance of the coating, it is necessary to
38、 specify the requirements for the protective paint system(s) along with the relevant laboratory performance tests to assess its (their) likely durability.In order to achieve the same performance as indicated by testing, proper surface preparation and application of the paint is essential. Close atte
39、ntion needs to be given to the execution of the work.This document places emphasis on high-durability paint systems, with the aim of minimizing maintenance and hence reducing safety considerations and environmental impact. ISO 2018 All rights reserved vBS EN ISO 129449:2018This page deliberately lef
40、t blankPaints and varnishes Corrosion protection of steel structures by protective paint systems Part 9: Protective paint systems and laboratory performance test methods for offshore and related structures (ISO 12944-9:2018)1 ScopeThis document specifies the performance requirements for protective p
41、aint systems for offshore and related structures (i.e. those exposed to the marine atmosphere, as well as those immersed in sea or brackish water). Such structures are exposed to environments of corrosivity category CX (offshore) and immersion category Im4 as defined in ISO 129442.This part of ISO 1
42、2944 describes paint systems for high durability according to ISO 129441.This document is applicable to structures made of carbon steel and does not cover Cd/Bi Cr and Zn/Bi Cr surfaces. It is not applicable to surfaces under insulation or concrete.This document is applicable for paint systems inten
43、ded for a service temperature range between 20 C and +80 C, and the performance testing is aimed at verifying suitability of the paint systems for this temperature range.This document is applicable for paint systems for submerged service (Im4) which are intended for ambient operating temperatures up
44、 to a maximum of 50 C.This document specifies: the test methods to be used to determine the composition of the separate components of the protective paint system; the laboratory performance test methods for the assessment of the likely durability of the protective paint system; the criteria to be us
45、ed to evaluate the results of performance tests.This document covers the requirements for new work and any repairs necessary before startup. It can also be used in relation to maintenance where complete refurbishment is carried out and the underlying metal substrate is completely exposed by abrasive
46、 blastcleaning.It does not address maintenance in general where methods of surface preparation other than abrasive blastcleaning are typically used.This document deals with structures, made of carbon steel of not less than 3 mm thickness, which are designed using an approved strength calculation.The
47、 following are not covered by this document: structures built of stainless steel as well as those built of copper, titanium or aluminium or their alloys; steel cables;INTERNATIONAL STANDARD ISO 12944-9:2018 ISO 2018 All rights reserved 1BS EN ISO 129449:2018ISO 12944-9:2018 buried structures; pipeli
48、nes; the interiors of storage tanks.2 Normative referencesThe following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of
49、 the referenced document (including any amendments) applies.ISO 1461, Hot dip galvanized coatings on fabricated iron and steel articles Specifications and test methodsISO 1514, Paints and varnishes Standard panels for testingISO 2063 (all parts), Thermal spraying Zinc, aluminium and their alloysISO 2811 (all parts), Paints and varnishes Determination of densityISO 28122, Paints and varnishes Determination of resistance to liquids Part 2: Water immersion methodISO 32331, Paints and varni
