1、Personal protective equipment - Footwear protecting against risks in foundries and weldingPart 1: Requirements and test methods for protection against risks in foundriesBS EN ISO 20349-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EURO
2、PENNE EUROPISCHE NORM EN ISO 20349-1 August 2017 ICS 13.340.50 Supersedes EN ISO 20349:2010English Version Personal protective equipment - Footwear protecting against risks in foundries and welding - Part 1: Requirements and test methods for protection against risks in foundries (ISO 20349-1:2017) q
3、uipement de protection individuelle - Chaussures de protection contre les risques dans les fonderies et lors doprations de soudage - Partie 1: Exigences et mthode dessai pour la protection contre les risques dans les fonderies (ISO 20349-1:2017) Persnliche Schutzausrstung - Schuhe zum Schutz gegen R
4、isiken in Gieereien und beim Schweien - Teil 1: Anforderungen und Prfverfahren zum Schutz gegen Risiken in Gieereien (ISO 20349-1:2017) This European Standard was approved by CEN on 12 June 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions
5、 for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in t
6、hree official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards
7、bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia,
8、Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means rese
9、rved worldwide for CEN national Members. Ref. No. EN ISO 20349-1:2017 ENational forewordThis British Standard is the UK implementation of EN ISO 20349-1:2017. It is identical to ISO 20349-1:2017. It supersedes BS EN ISO 20349:2010, which is withdrawn.The UK participation in its preparation was entru
10、sted to Technical Committee PH/1, Safety, protective and occupational footwear.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its corr
11、ect application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 82041 0ICS 13.340.50Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strat
12、egy Committee on 30 November 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 20349-1:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 20349-1 August 2017 ICS 13.340.50 Supersedes EN ISO 20349:2010English Version Personal protective equipment
13、 - Footwear protecting against risks in foundries and welding - Part 1: Requirements and test methods for protection against risks in foundries (ISO 20349-1:2017) quipement de protection individuelle - Chaussures de protection contre les risques dans les fonderies et lors doprations de soudage - Par
14、tie 1: Exigences et mthode dessai pour la protection contre les risques dans les fonderies (ISO 20349-1:2017) Persnliche Schutzausrstung - Schuhe zum Schutz gegen Risiken in Gieereien und beim Schweien - Teil 1: Anforderungen und Prfverfahren zum Schutz gegen Risiken in Gieereien (ISO 20349-1:2017)
15、This European Standard was approved by CEN on 12 June 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical refere
16、nces concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN
17、member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
18、 France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATION E
19、UROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 20349-1:2017 EBS EN ISO 20349-1:2017EN ISO 20349-1:2017 (E) 3 European foreword
20、 This document (EN ISO 20349-1:2017) has been prepared by Technical Committee CEN/TC 161 “Foot and leg protectors” the secretariat of which is held by BSI, in collaboration with Technical Committee ISO/TC 94 “Personal safety - Protective clothing and equipment”. This European Standard shall be given
21、 the status of a national standard, either by publication of an identical text or by endorsement, at the latest by February 2018, and conflicting national standards shall be withdrawn at the latest by August 2018. Attention is drawn to the possibility that some of the elements of this document may b
22、e the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document supersedes EN ISO 20349:2010. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association, and supports e
23、ssential requirements of EU Directive(s). For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document. According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this Europe
24、an Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovaki
25、a, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 20349-1:2017 has been approved by CEN as EN ISO 20349-1:2017 without any modification. BS EN ISO 20349-1:2017EN ISO 20349-1:2017 (E) 4 Annex ZA (informative) Relationship between this European
26、Standard and the essential requirements of EU Directive 89/686/EEC Personal Protective Equipment aimed to be covered This European Standard has been prepared under a Commissions standardization request M/031 Personal protective equipment to provide one voluntary means of conforming to essential requ
27、irements of the New Approach Directive 89/686/EEC Personal Protective Equipment. Once this standard is cited in the Official Journal of the European Union under that Directive 89/686/EEC, compliance with the normative clauses of this standard given in Table ZA.1 confers, within the limits of the sco
28、pe of this standard, a presumption of conformity with the corresponding essential requirements of that Directive 89/686/EEC, and associated EFTA regulations. Table ZA.1 Correspondence between this European Standard and EU Directive 89/686/EEC Personal Protective Equipment Essential Requirements of D
29、irective 89/686/EEC Clause(s)/sub-clause(s) of this EN Remarks/Notes 1.1 Ergonomics 7.1 EN ISO 20345:2011, 5.3.4 1.2 Innocuousness of PPE 7.9 1.4 Information supplied by the manufacturer 9 2.2 PPE enclosing the parts of the body to be protected EN ISO 20345:2011, 5.4.6 and 5.5.3 2.4 PPE subject to a
30、geing 7.3, 7.4, 7.5, 7.6, and 7.7 EN ISO 20345:2011, 5.3.2.5, 6.4.1 and 6.2.3.2 2.12 PPE bearing one or more identification or recognition marks directly or indirectly relating to health and safety 8 3.1 Protection against mechanical impact EN ISO 20345:2011, 5.3.2, 6.2.4, 6.2.6 and 6.2.7 3.1.2.1 Pr
31、otection against mechanical impact EN ISO 20345:2011, 5.3.5 3.2 Protection against (static) compression of part of the body EN ISO 20345:2011, 5.3.2.4, 6.2.1 and 6.2.4 3.3 Protection against physical injury (abrasion, perforation, cuts, bites) EN ISO 20345:2011, 6.2.1 and 6.2.8 3.6 Protection agains
32、t heat and/or fire 7.1, 7.2, 7.3, 7.5, 7.5, 7.6, 7.7 and 7.8 EN ISO 20345:2011, 6.4.1 3.7 Protection against cold EN ISO 20345:2011, 6.2.3.2 3.8 Protection against electric shock EN ISO 20345:2011, 6.2.2.3 WARNING 1 Presumption of conformity stays valid only as long as a reference to this European S
33、tandard is maintained in the list published in the Official Journal of the European Union. Users of this standard should consult frequently the latest list published in the Official Journal of the European Union. WARNING 2 Other Union legislation may be applicable to the product(s) falling within th
34、e scope of this standard. BS EN ISO 20349-1:2017This page deliberately left blank ISO 20349-1:2017(E)Foreword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Classification of footwear 25 Sampling and conditioning 26 Requirements 27 Specific requirements . 47.1 Height of upper . 47
35、.2 Footwear design. 47.3 Resistance to the effects of molten metal. 57.4 Resistance of upper to contact heat transmission . 57.5 Burning behaviour . 57.6 Heat insulation of sole complex . 57.7 Surface shrinkage of leather 57.8 Footwear removal time 77.9 Innocuousness . 78 Marking 79 Information to b
36、e supplied by the manufacturer . 89.1 General . 89.2 Information regarding perforation resistant insert 99.3 Electrical properties 109.3.1 Antistatic footwear .109.3.2 Electrically insulating footwear . 109.4 Insocks 10Annex A (normative) Test method for the resistance of footwear to the effects of
37、large quantities of molten metal 11Bibliography .15 ISO 2017 All rights reserved iiiContents PageISO 20349-1:2017(E)Foreword iv1 Scope . 12 Normative references 13 Terms and definitions . 14 Classification of footwear 25 Sampling and conditioning 26 Requirements 27 Specific requirements . 47.1 Heigh
38、t of upper . 47.2 Footwear design. 47.3 Resistance to the effects of molten metal. 57.4 Resistance of upper to contact heat transmission . 57.5 Burning behaviour . 57.6 Heat insulation of sole complex . 57.7 Surface shrinkage of leather 57.8 Footwear removal time 77.9 Innocuousness . 78 Marking 79 I
39、nformation to be supplied by the manufacturer . 89.1 General . 89.2 Information regarding perforation resistant insert 99.3 Electrical properties 109.3.1 Antistatic footwear .109.3.2 Electrically insulating footwear . 109.4 Insocks 10Annex A (normative) Test method for the resistance of footwear to
40、the effects of large quantities of molten metal 11Bibliography .15 ISO 2017 All rights reserved iiiContents PageBS EN ISO 20349-1:2017ISO 20349-1:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The wo
41、rk of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governm
42、ental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in th
43、e ISO/IEC Directives, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the po
44、ssibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list
45、 of patent declarations received (see www .iso .org/ patents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions relat
46、ed to conformity assessment, as well as information about ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.This document was prepared by the European Committee Standardization (CEN) Tech
47、nical Committee CEN/TC 161, Foot and leg protectors in equipment, in collaboration with ISO Technical Committee TC 94 Personal safety Protective clothing and equipment, Subcommittee SC 3, Foot protection, in accordance with the agreement on technical cooperation between ISO and CEN (Vienna Agreement
48、).This first edition of ISO 20349-1 cancels and replaces ISO 20349:2010, which has been technically revised.A list of all parts in the ISO 20349 series can be found on the ISO website.iv ISO 2017 All rights reservedBS EN ISO 20349-1:2017ISO 20349-1:2017(E)ForewordISO (the International Organization
49、for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission
