1、Energy performance of buildings Indicators for partial EPB requirements related to thermal energy balance and fabric featuresPart 1: Overview of optionsBS EN ISO 52018-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE
2、NORM EN ISO 52018-1 July 2017 ICS 91.120.10 English Version Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 1: Overview of options (ISO 52018-1:2017) Performance nergtique des btiments - Indicateurs pour des exige
3、nces PEB partielles lies aux caractristiques du bilan nergtique thermique et du bti - Partie 1: Aperu des options (ISO 52018-1:2017)Energieeffizienz von Gebuden - Indikatoren fr EPB-Teilanforderungen im Hinblick auf die Wrmeenergiebilanz und Funktionen der Bausubstanz - Teil 1: berblick ber die Mgli
4、chkeiten (ISO 52018-1:2017) This European Standard was approved by CEN on 27 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date
5、lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation un
6、der the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former
7、 Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION
8、COMIT EUROPEN DE NORMALISATION EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 52018-1:2017 ENational forewordThis British Sta
9、ndard is the UK implementation of EN ISO 52018-1:2017.The UK participation in its preparation was entrusted to Technical Committee B/540/2, Building performance - Moisture.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purp
10、ort to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 87109 2ICS 91.120.10Compliance with a British Standard cannot confer immunity from legal obligati
11、ons.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN ISO 52018-1:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN ISO 52018-1 July 201
12、7 ICS 91.120.10 English Version Energy performance of buildings - Indicators for partial EPB requirements related to thermal energy balance and fabric features - Part 1: Overview of options (ISO 52018-1:2017) Performance nergtique des btiments - Indicateurs pour des exigences PEB partielles lies aux
13、 caractristiques du bilan nergtique thermique et du bti - Partie 1: Aperu des options (ISO 52018-1:2017)Energieeffizienz von Gebuden - Indikatoren fr EPB-Teilanforderungen im Hinblick auf die Wrmeenergiebilanz und Funktionen der Bausubstanz - Teil 1: berblick ber die Mglichkeiten (ISO 52018-1:2017)
14、This European Standard was approved by CEN on 27 February 2017. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical re
15、ferences concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a
16、CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedo
17、nia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMIT EUROPEN DE NORMALISATI
18、ON EUROPISCHES KOMITEE FR NORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN ISO 52018-1:2017 EBS EN ISO 52018-1:2017EN ISO 52018-1:2017 (E) 2 European fore
19、word This document (EN ISO 52018-1:2017) has been prepared by Technical Committee ISO/TC 163 “Thermal performance and energy use in the built environment“ in collaboration with Technical Committee CEN/TC 89 “Thermal performance of buildings and building components” the secretariat of which is held b
20、y SIS. This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by January 2018, and conflicting national standards shall be withdrawn at the latest by January 2018. Attention is drawn to the possibility that
21、 some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association. This document
22、is part of the set of standards on the energy performance of buildings (the set of EPB standards) and has been prepared under a mandate given to CEN by the European Commission and the European Free Trade Association (Mandate M/480, see reference EF1 below), and supports essential requirements of EU
23、Directive 2010/31/EC on the energy performance of buildings (EPBD, EF2). In case this standard is used in the context of national or regional legal requirements, mandatory choices may be given at national or regional level for such specific applications, in particular for the application within the
24、context of EU Directives transposed into national legal requirements. Further target groups are users of the voluntary common European Union certification scheme for the energy performance of non-residential buildings (EPBD art.11.9) and any other regional (e.g. Pan European) parties wanting to moti
25、vate their assumptions by classifying the building energy performance for a dedicated building stock. References: EF1 Mandate M/480, Mandate to CEN, CENELEC and ETSI for the elaboration and adoption of standards for a methodology calculating the integrated energy performance of buildings and promoti
26、ng the energy efficiency of buildings, in accordance with the terms set in the recast of the Directive on the energy performance of buildings (2010/31/EU) of 14th December 2010 EF2 EPBD, Recast of the Directive on the energy performance of buildings (2010/31/EU) of 14thDecember 2010 According to the
27、 CEN-CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hu
28、ngary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Endorsement notice The text of ISO 52018-1:2017 has been approved by CEN as EN ISO 52018-1:2017
29、 without any modification. ISO 52018-1:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and definitions . 23.1 Building . 23.2 Indoor and outdoor conditions. 53.3 Technical building systems . 63.4 Energy . 73.5 Energy performance . 73.6 Building heat transfer, heat gains an
30、d recoverable system thermal losses 84 Symbols and subscripts 104.1 Symbols 104.2 Subscripts . 105 Description of this document .115.1 General 115.2 Brief overview of this document 125.3 Selection criteria between the possible options .125.4 Input and output data 126 Mix of EPB features with require
31、ments .137 Summer thermal comfort .138 Winter thermal comfort .149 Energy need for heating or variants .1410 Energy need for cooling, or variants .1511 Combination of “needs” 1512 Overall thermal insulation of the thermal envelope 1513 Thermal insulation of individual elements of the thermal envelop
32、e .1514 Thermal bridges 1615 Window energy performances1716 Airtightness of the thermal envelope 1717 Solar control .1818 Other requirements .1819 Quality control .1820 Compliance check .18Annex A (normative) Input and method selection data sheet Template 20Annex B (informative) Input and method sel
33、ection data sheet Default choices 29Annex C (normative) Regional references in line with ISO Global Relevance Policy 42Bibliography .43 ISO 2017 All rights reserved iiiContents PageBS EN ISO 52018-1:2017ISO 52018-1:2017(E)Foreword ivIntroduction v1 Scope . 12 Normative references 13 Terms and defini
34、tions . 23.1 Building . 23.2 Indoor and outdoor conditions. 53.3 Technical building systems . 63.4 Energy . 73.5 Energy performance . 73.6 Building heat transfer, heat gains and recoverable system thermal losses 84 Symbols and subscripts 104.1 Symbols 104.2 Subscripts . 105 Description of this docum
35、ent .115.1 General 115.2 Brief overview of this document 125.3 Selection criteria between the possible options .125.4 Input and output data 126 Mix of EPB features with requirements .137 Summer thermal comfort .138 Winter thermal comfort .149 Energy need for heating or variants .1410 Energy need for
36、 cooling, or variants .1511 Combination of “needs” 1512 Overall thermal insulation of the thermal envelope 1513 Thermal insulation of individual elements of the thermal envelope .1514 Thermal bridges 1615 Window energy performances1716 Airtightness of the thermal envelope 1717 Solar control .1818 Ot
37、her requirements .1819 Quality control .1820 Compliance check .18Annex A (normative) Input and method selection data sheet Template 20Annex B (informative) Input and method selection data sheet Default choices 29Annex C (normative) Regional references in line with ISO Global Relevance Policy 42Bibli
38、ography .43 ISO 2017 All rights reserved iiiContents PageBS EN ISO 52018-1:2017ISO 52018-1:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally car
39、ried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.
40、 ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directives, Part 1. In particular the differe
41、nt approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document ma
42、y be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the ISO list of patent declarations received (see www .iso .org/ pa
43、tents).Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement.For an explanation on the voluntary nature of standards, the meaning of ISO specific terms and expressions related to conformity assessment, as well as information abo
44、ut ISOs adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see the following URL: www .iso .org/ iso/ foreword .html.ISO 52018-1 was prepared by ISO Technical Committee ISO/TC 163, Thermal performance and energy use in the built environment, Subcommit
45、tee SC 2, Calculation methods, in collaboration with the European Committee for Standardization (CEN) Technical Committee CEN/TC 89, Thermal performance of buildings and building components, in accordance with the Agreement on technical cooperation between ISO and CEN (Vienna Agreement).A list of al
46、l parts in the ISO 52018 series can be found on the ISO website.iv ISO 2017 All rights reservedBS EN ISO 52018-1:2017ISO 52018-1:2017(E)ForewordISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing I
47、nternational Standards is normally carried out through ISO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison
48、 with ISO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEC Directi
49、ves, Part 1. In particular the different approval criteria needed for the different types of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of th
