1、 ETSI TS 125 141 V6.0.0 (2002-12)Technical Specification Universal Mobile Telecommunications System (UMTS);Base station conformance testing (FDD)(3GPP TS 25.141 version 6.0.0 Release 6)ETSI ETSI TS 125 141 V6.0.0 (2002-12) 1 3GPP TS 25.141 version 6.0.0 Release 6 Reference RTS/TSGR-0425141v600 Keywo
2、rds UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present docum
3、ent can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of disput
4、e, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETS
5、I documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to r
6、eproduction in all media. European Telecommunications Standards Institute 2002. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its
7、 Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 125 141 V6.0.0 (2002-12) 2 3GPP TS 25.141 version 6.0.0 Release 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may
8、have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI sta
9、ndards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of o
10、ther IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer t
11、o technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The cross reference between GSM, UMTS, 3GPP and ETSI identities can be found under http:/webapp.etsi.org/key/q
12、ueryform.asp . ETSI ETSI TS 125 141 V6.0.0 (2002-12) 3 3GPP TS 25.141 version 6.0.0 Release 6 Contents Intellectual Property Rights2 Foreword.2 Foreword.13 1 Scope 14 2 References 14 3 Definitions and abbreviations.15 3.1 Definitions15 3.2 Void15 3.3 Abbreviations .15 3.4 Radio Frequency bands 16 3.
13、4.1 Frequency bands .16 3.4.2 TXRX frequency separation .16 3.5 Channel arrangement17 3.5.1 Channel spacing17 3.5.2 Channel raster .17 3.5.3 Channel number17 4 General test conditions and declarations 17 4.1 Acceptable uncertainty of Test System 17 4.1.1 Measurement of test environments .18 4.1.2 Me
14、asurement of transmitter 19 4.1.3 Measurement of receiver 20 4.1.4 Measurement of performance requirement .21 4.2 Test Tolerances (informative) 21 4.2.1 Transmitter22 4.2.2 Receiver 22 4.2.3 Performance requirement23 4.2.4 RRM measurements23 4.3 Interpretation of measurement results 23 4.3A Base sta
15、tion classes 23 4.4 Test environments 24 4.4.1 Normal test environment 24 4.4.2 Extreme test environment .24 4.4.2.1 Extreme temperature .24 4.4.3 Vibration.25 4.4.4 Power supply 25 4.4.5 Definition of Additive White Gaussian Noise (AWGN) Interferer 25 4.5 Selection of configurations for testing25 4
16、.6 BS Configurations 25 4.6.1 Receiver diversity .25 4.6.2 Duplexers26 4.6.3 Power supply options26 4.6.4 Ancillary RF amplifiers 26 4.6.5 BS using antenna arrays27 4.6.5.1 Receiver tests 27 4.6.5.2 Transmitter tests28 4.7 Regional requirements28 4.8 Specified frequency range 30 5 Format and interpr
17、etation of tests.31 6 Transmitter .31 6.1 General .31 6.1.1 Test Models 32 6.1.1.1 Test Model 1 .32 6.1.1.2 Test Model 2 .35 ETSI ETSI TS 125 141 V6.0.0 (2002-12) 4 3GPP TS 25.141 version 6.0.0 Release 6 6.1.1.3 Test Model 3 .35 6.1.1.4 Test Model 4 .36 6.1.1.4A Test Model 5 .36 6.1.1.5 DPCH Structu
18、re of the Downlink Test Models.38 6.1.1.6 Common channel Structure of the Downlink Test Models .39 6.1.1.6.1 P-CCPCH 39 6.1.1.6.2 PICH39 6.1.1.6.3 Primary scrambling code and SCH39 6.1.1.6.4 S-CCPCH containing PCH39 6.1.1.7 HS-PDSCH Structure of the Downlink Test Model 5.40 6.1.1.8 HS-SCCH Structure
19、 of the Downlink Test Model 5.40 6.2 Base station output power 40 6.2.1 Base station maximum output power40 6.2.1.1 Definition and applicability.40 6.2.1.2 Minimum Requirement .40 6.2.1.3 Test purpose 40 6.2.1.4 Method of test .41 6.2.1.4.1 Initial conditions41 6.2.1.4.2 Procedure.41 6.2.1.5 Test Re
20、quirements.41 6.2.2 CPICH power accuracy 41 6.2.2.1 Definition and applicability.41 6.2.2.2 Minimum Requirement .41 6.2.2.3 Test purpose 41 6.2.2.4 Method of test .41 6.2.2.4.1 Initial conditions41 6.2.2.4.2 Procedure.42 6.2.2.5 Test Requirement 42 6.3 Frequency error 42 6.3.1 Definition and applica
21、bility 42 6.3.2 Minimum Requirement.42 6.3.3 Test purpose42 6.3.4 Method of test .42 6.3.5 Test requirement .42 6.4 Output power dynamics43 6.4.1 Inner loop power control.43 6.4.2 Power control steps.43 6.4.2.1 Definition and applicability.43 6.4.2.2 Minimum Requirement .43 6.4.2.3 Test purpose 44 6
22、.4.2.4 Method of test .44 6.4.2.4.1 Initial conditions44 6.4.2.4.2 Procedure.44 6.4.2.5 Test requirement .44 6.4.3 Power control dynamic range .45 6.4.3.1 Definition and applicability.45 6.4.3.2 Minimum Requirement .45 6.4.3.3 Test purpose 45 6.4.3.4 Method of test .45 6.4.3.4.1 Initial conditions45
23、 6.4.3.4.2 Procedure.46 6.4.3.5 Test requirement .46 6.4.4 Total power dynamic range 46 6.4.4.1 Definition and applicability.46 6.4.4.2 Minimum Requirement .46 6.4.4.3 Test purpose 46 6.4.4.4 Method of test .46 6.4.4.5 Test requirement .46 6.4.5 IPDL time mask47 6.4.5.1 Definition and applicability.
24、47 6.4.5.2 Minimum Requirement .47 6.4.5.3 Test purpose 47 ETSI ETSI TS 125 141 V6.0.0 (2002-12) 5 3GPP TS 25.141 version 6.0.0 Release 6 6.4.5.4 Method of test .47 6.4.5.4.1 Initial conditions47 6.4.5.4.2 Procedure.48 6.4.5.5 Test Requirements.48 6.5 Output RF spectrum emissions.48 6.5.1 Occupied b
25、andwidth .48 6.5.1.1 Definition and applicability.48 6.5.1.2 Minimum Requirements48 6.5.1.3 Test purpose 48 6.5.1.4 Method of test .48 6.5.1.4.1 Initial conditions48 6.5.1.4.2 Procedure.49 6.5.1.5 Test requirements49 6.5.2 Out of band emission 49 6.5.2.1 Spectrum emission mask.49 6.5.2.1.1 Definitio
26、ns and applicability .49 6.5.2.1.2 Minimum Requirements49 6.5.2.1.3 Test purpose 51 6.5.2.1.4 Method of test51 6.5.2.1.4.1 Initial conditions 51 6.5.2.1.4.2 Procedures .51 6.5.2.1.5 Test requirements 51 6.5.2.2 Adjacent Channel Leakage power Ratio (ACLR).53 6.5.2.2.1 Definition and applicability.53
27、6.5.2.2.2 Minimum Requirement .53 6.5.2.2.3 Test purpose 53 6.5.2.2.4 Method of test53 6.5.2.2.4.1 Initial conditions 53 6.5.2.2.4.2 Procedure .54 6.5.2.2.5 Test Requirement.54 6.5.3 Spurious emissions .54 6.5.3.1 Definition and applicability.54 6.5.3.2 (void).54 6.5.3.3 (void).54 6.5.3.4 Minimum Re
28、quirements.54 6.5.3.4.1 Spurious emissions (Category A) 54 6.5.3.4.1.1 Minimum Requirement55 6.5.3.4.2 Spurious emissions (Category B) 55 6.5.3.4.2.1 Minimum Requirement55 6.5.3.4.3 Protection of the BS receiver.57 6.5.3.4.3.1 Minimum Requirement57 6.5.3.4.4 Co-existence with GSM 90058 6.5.3.4.4.1 O
29、peration in the same geographic area 58 6.5.3.4.4.1.1 Minimum Requirement 58 6.5.3.4.4.2 Co-located base stations.58 6.5.3.4.4.2.1 Minimum Requirement 58 6.5.3.4.5 Co-existence with DCS 1800 58 6.5.3.4.5.1 Operation in the same geographic area 58 6.5.3.4.5.1.1 Minimum Requirement 58 6.5.3.4.5.2 Co-l
30、ocated basestations59 6.5.3.4.5.2.1 Minimum Requirement 59 6.5.3.4.6 Co-existence with PHS59 6.5.3.4.6.1 Minimum Requirement59 6.5.3.4.7 Co-existence with services in adjacent frequency bands.59 6.5.3.4.7.1 Minimum requirement .59 6.5.3.4.8 Co-existence with UTRA-TDD.59 6.5.3.4.8.1 Operation in the
31、same geographic area 59 6.5.3.4.8.1.1 Minimum Requirement 60 6.5.3.4.8.2 Co-located base stations.60 6.5.3.4.8.2.1 Minimum Requirement 60 6.5.3.4.9 Co-existence with UTRA in frequency band I 60 6.5.3.4.9.1 Operation in the same geographic area 60 ETSI ETSI TS 125 141 V6.0.0 (2002-12) 6 3GPP TS 25.14
32、1 version 6.0.0 Release 6 6.5.3.4.9.1.1 Minimum Requirement 60 6.5.3.4.9.2 Co-located base stations.60 6.5.3.4.9.2.1 Minimum Requirement 60 6.5.3.4.10 Co-existence with UTRA in frequency band III61 6.5.3.4.10.1 Operation in the same geographic area 61 6.5.3.4.10.1.1 Minimum Requirement 61 6.5.3.4.10
33、.2 Co-located base stations.61 6.5.3.4.10.2.1 Minimum Requirement 61 6.5.3.4.11 Co-existence with PCS1900 61 6.5.3.4.11.1 Operation in the same geographic area 61 6.5.3.4.11.1.1 Minimum Requirement 61 6.5.3.4.11.2 Co-located base stations.62 6.5.3.4.11.2.1 Minimum Requirement 62 6.5.3.4.12 Co-existe
34、nce with GSM850.62 6.5.3.4.12.1 Operation in the same geographic area 62 6.5.3.4.12.1.1 Minimum Requirement 62 6.5.3.4.12.2 Co-located base stations.62 6.5.3.4.12.2.1 Minimum Requirement 62 6.5.3.5 Test purpose 62 6.5.3.6 Method of Test62 6.5.3.6.1 Initial conditions62 6.5.3.6.2 Procedure.63 6.5.3.7
35、 Test requirements63 6.5.3.7.1 Spurious emissions (Category A) 63 6.5.3.7.2 Spurious emissions (Category B) 64 6.5.3.7.3 Protection of the BS receiver.66 6.5.3.7.4 Co-existence with GSM 90066 6.5.3.7.4.1 Operation in the same geographic area 66 6.5.3.7.4.2 Co-located base stations.67 6.5.3.7.5 Co-ex
36、istence with DCS 1800 67 6.5.3.7.5.1 Operation in the same geographic area 67 6.5.3.7.5.2 Co-located base stations.67 6.5.3.7.6 Co-existence with PHS67 6.5.3.7.7 Co-existence with services in adjacent frequency bands.67 6.5.3.7.8 Co-existence with UTRA-TDD.68 6.5.3.7.8.1 Operation in the same geogra
37、phic area 68 6.5.3.7.8.2 Co-located base stations.68 6.5.3.7.9 Co-existence with UTRA in frequency band I 68 6.5.3.7.9.1 Operation in the same geographic area 68 6.5.3.7.9.2 Co-located base stations.68 6.5.3.7.10 Co-existence with UTRA in frequency band III68 6.5.3.7.10.1 Operation in the same geogr
38、aphic area 68 6.5.3.7.10.2 Co-located base stations.69 6.5.3.7.11 Co-existence with PCS1900 69 6.5.3.7.11.1 Operation in the same geographic area 69 6.5.3.7.11.2 Co-located base stations.69 6.5.3.7.12 Co-existence with GSM850.69 6.5.3.7.12.1 Operation in the same geographic area 69 6.5.3.7.12.2 Co-l
39、ocated base stations.69 6.6 Transmit intermodulation .70 6.6.1 Definition and applicability 70 6.6.2 Minimum Requirement.70 6.6.3 Test purpose70 6.6.4 Method of test .70 6.6.4.1 Initial conditions .70 6.6.4.2 Procedures.70 6.6.5 Test Requirements 71 6.7 Transmit modulation 71 6.7.1 Error Vector Magn
40、itude71 6.7.1.1 Definition and applicability.71 6.7.1.2 Minimum Requirement .71 6.7.1.3 Test Purpose71 ETSI ETSI TS 125 141 V6.0.0 (2002-12) 7 3GPP TS 25.141 version 6.0.0 Release 6 6.7.1.4 Method of Test72 6.7.1.4.1 Initial Conditions.72 6.7.1.4.2 Procedure.72 6.7.1.5 Test Requirement 72 6.7.2 Peak
41、 Code Domain Error72 6.7.2.1 Definition and applicability.72 6.7.2.2 Minimum requirement 72 6.7.2.3 Test Purpose73 6.7.2.4 Method of test .73 6.7.2.4.1 Initial conditions73 6.7.2.4.2 Procedure.73 6.7.2.5 Test requirement .73 6.7.3 Time alignment error in Tx Diversity.73 6.7.3.1 Definition and applic
42、ability.73 6.7.3.2 Minimum Requirement .73 6.7.3.3 Test Purpose73 6.7.3.4 Method of Test73 6.7.3.4.1 Initial Conditions.73 6.7.3.4.2 Procedure.74 6.7.3.5 Test Requirement 74 7 Receiver characteristics74 7.1 General .74 7.2 Reference sensitivity level75 7.2.1 Definition and applicability 75 7.2.2 Min
43、imum Requirement.75 7.2.3 Test purpose75 7.2.4 Method of testing75 7.2.4.1 Initial conditions .75 7.2.4.2 Procedure 75 7.2.5 Test requirement .76 7.3 Dynamic range .76 7.3.1 Definition and applicability 76 7.3.2 Minimum Requirement.76 7.3.3 Test purpose76 7.3.4 Method of test .76 7.3.4.1 Initial con
44、ditions .76 7.3.4.2 Procedure 76 7.3.5 Test Requirements 77 7.4 Adjacent Channel Selectivity (ACS)77 7.4.1 Definition and applicability 77 7.4.2 Minimum Requirement.77 7.4.3 Test purpose77 7.4.4 Method of test .78 7.4.4.1 Initial conditions .78 7.4.4.2 Procedure 78 7.4.5 Test Requirements 78 7.5 Blo
45、cking characteristics .78 7.5.1 Definition and applicability 78 7.5.2 Minimum Requirements .78 7.5.3 Test purpose81 7.5.4 Method of test .81 7.5.4.1 Initial conditions .81 7.5.4.2 Procedure 82 7.5.5 Test Requirements 82 7.6 Intermodulation characteristics 85 7.6.1 Definition and applicability 85 7.6
46、.2 Minimum Requirement.85 7.6.3 Test purpose85 7.6.4 Method of test .85 7.6.4.1 Initial conditions .85 7.6.4.2 Procedures.85 ETSI ETSI TS 125 141 V6.0.0 (2002-12) 8 3GPP TS 25.141 version 6.0.0 Release 6 7.6.5 Test requirements86 7.7 Spurious Emissions 86 7.7.1 Definition and applicability 86 7.7.2
47、Minimum Requirements .86 7.7.3 Test purpose87 7.7.4 Method of test .87 7.7.4.1 Initial conditions .87 7.7.4.2 Procedure 87 7.7.5 Test requirements88 7.8 Verification of the internal BER calculation 88 7.8.1 Definition and applicability 88 7.8.2 Minimum Requirement.88 7.8.3 Test purpose89 7.8.4 Metho
48、d of test .89 7.8.4.1 Initial conditions .89 7.8.4.2 Procedure 89 7.8.5 Test Requirement89 8 Performance requirement .89 8.1 General .89 8.2 Demodulation in static propagation conditions 90 8.2.1 Demodulation of DCH90 8.2.1.1 Definition and applicability.90 8.2.1.2 Minimum requirement 90 8.2.1.3 Tes
49、t purpose 90 8.2.1.4 Method of test .90 8.2.1.4.1 Initial conditions90 8.2.1.4.2 Procedure.90 8.2.1.5 Test requirements91 8.3 Demodulation of DCH in multipath fading conditions 91 8.3.1 Multipath fading Case 191 8.3.1.1 Definition and applicability.91 8.3.1.2 Minimum requirement 91 8.3.1.3 Test Purpose91 8.3.1.4 Method of test .91 8.3.1.4.1 Initial conditions91 8.3.1.4.2 Procedure.92 8.3.1.5 Test requirements92 8.3.2 Multipath fading Case 292 8.3.2.1 Definition and applicability.92 8.3.2.2 Minimum requirement 92 8.3.2.3 Test Purpose93 8.3.2.4 Method of test .93 8.3.2.4.1 Initi
