1、ETSI TS 131 121 V3.5.0 (2003-03) Technical Specificafion Universal Mobile Telecommunications System (UMTS); U ICC-termi na1 interface; USIM application test specification (3GPP TS 31.121 version 3.5.0 Release 1999) 3GPP TS 31.121 version 3.5.0 Release 1999 1 ETSI TS 131 121 V3.5.0 (2003-03) Referenc
2、e RTS/TSGT-O331121350 Keywords U MTS ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individu
3、al copies of the present document can be downloaded from: http:lwmv.etsi .arq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document
4、Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the curre
5、nt status of this and other ETSI documents is available at ha p:/pa rta I. etsi I a rgltbistat uslstatus .as p If you find errors in the present document, send your comment to: Cori vriaht Notifica tion No part may be reproduced except as authorized by written permission. The copyright and the foreg
6、oing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTMand UMTSTMare Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered b
7、y ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3GPP TS 31.121 version 3.5.0 Release 1999 2 ETSI TS 131 121 V3.5.0 (2003-03) Intellectual Property Rights IPRs essential or potentially essent
8、ial to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (7PRs); Essential, orpotentially Essential, IPRs notlJied
9、 to ETSI in respect ofETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (5). All published ETSI deliverables shall include information which directs the reader to the above source of information. Foreword This Technical Specification (
10、TS) has been produced by ETSI 3rd Generation Partnership Project (3GPP). The present document may refer to technical specifications or reports using their 3GPP identities, UMTS identities or GSM identities. These should be interpreted as being references to the corresponding ETSI deliverables. The c
11、ross reference between GSM, UMTS, 3GPP and ETSI identities can be found under ht tn : Nweb ann. et si. og;kev/aiiervfom. asn . ETSI 3GPP TS 31.121 version 3.5.0 Release 1999 3 ETSI TS 131 121 V3.5.0 (2003-03) Contents Intellectual Property Rights 2 Foreword . 2 Foreword . 10 Introduction 10 1 Scope
12、11 2 References 11 3 Definitions. symbols. abbreviations and coding . 12 3.1 Definitions 12 Symbols 13 3.2 3.3 Abbreviations . 13 3.4 Coding Conventions . 14 4 Default Values 14 4.1 Definition of default values for USIM-Terminal interface testing (Default UICC) . 15 4.1.1 Values of the EFs (Default
13、UICC) . 15 4.1.1.1 EFMSI (IMSI) 15 4.1.1.2 EFm (Administrative Data) 15 4.1.1.3 4.1.1.4 4.1.1.5 4.1.1.6 4.1.1.7 4.1.1.8 4.1.1.9 4.1.1.10 4.1.1.1 1 4.1.1.12 4.1.1.13 4.1.1.14 PIN 18 4.1.1.15 PIN2 18 4.1.1.16 Unblock PIN . 18 4.1.1.17 Unblock PIN2 . 18 Other Values ofthe USIM 19 4.1.1.18 4.2 Definitio
14、n of FDN UICC 19 4.2.1 Values of the EFs (FDN UICC) . 19 4.2.1.1 4.2.1.2 4.2.1.3 4.2.1.4 4.2.1.5 4.3 4.3.1 4.3.1.1 EFUST (USIM Service Table) 21 EFEST (Enable Service Table) 21 4.3.1.2 4.3.1.3 EFBDN (Barred Dialling Numbers) 21 4.3.1.4 EFEcc (Emergency Call Codes) 22 4.3.1.5 Other Values of the USIM
15、 22 5 Subscription related tests 22 5.1 IMSI / TMSI handling 22 UE identification by short IMSI . 22 5.1.1 5.1.1.1 Definition and applicability . 22 5.1.1.2 Conformance requirement . 22 5.1.1.3 Test purpose 23 . EFLOCI (Location Information) 15 EFKeys (Ciphering and Integrity Keys) 15 EFKeyspS (Ciph
16、ering and Integrity Keys for Packet Switched domain) 16 EFAcc (Access Control Class) . 16 EFUST (USIM Service Table) 16 EFEST (Enable Service Table) 16 EFPLmwACT (User Controlled PLMN Selector with Access Technology) 17 EFOpLmwACT (Operator Controlled PLMN Selector with Access Technology) 17 EFmLmAC
17、T (RPLMN Last used Access Technology) 18 EFFPL (Forbidden PLMNs) 16 EFmN (Abbreviated Dialling Number) . 16 EFUST (USIM Service Table) 19 EFEST (Enable Service Table) 19 EFFDN (Fixed Dialling Numbers) 19 EFEcc (Emergency Call Codes) . 20 Other Values ofthe USIM 20 Definition of BDN UICC . 20 Values
18、of the EFs (BDN UICC) . 21 . ETSI 3GPP TS 31.121 version 3.5.0 Release 1999 4 ETSI TS 131 121 V3.5.0 (2003-03) 5.1.1.4 5.1.1.4.1 5.1.1.4.2 5.1.1.5 5.1.2 5.1.2.1 5.1.2.2 5.1.2.3 5.1.2.4 5.1.2.4.1 5.1.2.4.2 5.1.2.5 5.1.3 5.1.3.1 5.1.3.2 5.1.3.3 5.1.3.4 5.1.3.4.1 5.1.3.4.2 5.1.3.5 5.1.4 5.1.4.1 5.1.4.2
19、 5.1.4.3 5.1.4.4 5.1.4.4.1 5.1.4.4.2 5.1.4.5 5.1.5 5.1.5.1 5.1.5.2 5.1.5.3 5.1.5.4 5.1.5.4.1 5.1.5.4.2 5.1.5.5 5.2 5.2.1 5.2.1.1 5.2.1.2 5.2.1.3 5.2.1.4 5.2.1.4.1 5.2.1.4.2 5.2.1.4.3 5.2.1.5 .23 . 23 .23 . 23 .23 . 23 .24 .24 .24 .24 . .24 . .24 . Conformance requirement . . 23 . . . Conformance req
20、uirement . 25 Test purpose 25 . .25 Initial conditions 25 Procedure . . .25 Acceptance criteria . 25 UE identification by “long“ TMSI . 25 Definition and applicability. . 25 Conformance requirement . 26 Method of test . . . Initial conditions . . Acceptance criteria . ey set identifier assignment De
21、finition and applicability. . UE identification by long IMSI, TMSI . . . Initial conditions Procedure . Acceptance criteria Definition and applicability Conformance requirement Test purpose . Method of test Initial conditions . Coding details. Procedure Acceptance criteria . 6 6.1 PIN handling . . 6
22、.1.1 Entry of PIN . . 6.1.1.1 Definition and applicability. . 6.1.1.2 Conformance requirement . 6.1.1.3 Test purpose . . 6.1.1.4 Method of test . 6.1.1.4.1 Initial conditions . 6.1.1.4.2 Procedure . 6.1.1.5 Acceptance criteria 6.1.2 Change of PIN . 6.1.2.1 Definition and applic 6.1.2.2 Conformance r
23、equirement 6.1.2.3 Test purpose . 6.1.2.4 Method of test Security related Tests . 39 . ETSI 6.1.2.4.1 6.1.2.4.2 6.1.2.5 6.1.3 6.1.3.1 6.1.3.2 6.1.3.3 6.1.3.4 6.1.3.4.1 6.1.3.4.2 6.1.3.5 6.1.4 6.1.4.1 6.1.4.2 6.1.4.3 6.1.4.4 6.1.4.4.1 6.1.4.4.2 6.1.4.5 6.1.5 6.1.5.1 6.1.5.2 6.1.5.3 6.1.5.4 6.1.5.4.1
24、6.1.5.4.2 6.1.5.5 6.1.6 6.1.6.1 6.1.6.2 6.1.6.3 6.1.6.4 6.1.6.4.1 6.1.6.4.2 6.1.6.5 6.2 6.2.1 6.2.1.1 6.2.1.2 6.2.1.3 6.2.1.4 6.2.1.4.1 6.2.1.4.2 6.2.1.5 6.2.2 6.2.2.1 6.2.2.2 6.2.2.3 6.2.2.4 6.2.2.4.1 6.2.2.4.2 6.2.2.5 6.2.3 6.2.3.1 6.2.3.2 6.2.3.3 6.2.3.4 6.2.3.4.1 6.2.3.4.2 6.2.3.5 6.3 Initial co
25、nditions 40 Procedure . 40 Acceptance criteria 40 Unblock PIN . 41 Definition and applicability . 41 Conformance requirement . 41 Test purpose 41 Method of test . 41 Initial conditions 41 Procedure . 41 Acceptance criteria 41 42 42 Conformance requirement 42 42 42 42 42 42 43 . Definition and applic
26、abil 43 Conformance requirement 43 43 Method of test . 43 Initial conditions 43 Procedure . 43 Acceptance criteria 43 Unblock PIN2 . 44 Definition and applicability . 44 Conformance requirement . 44 Test purpose 44 Method of test . 44 Initial conditions 44 Procedure . 44 Acceptance criterias 45 Fixe
27、d Dialling Numbers (FDN) handling . 45 Terminal and USIM with FDN enabled, EFmN readable and updateable 45 Definition and applicability . 45 Conformance requirement . 45 Test purpose 45 Method of test . 46 Initial conditions 46 Procedure . 46 Acceptance criteria 46 Terminal and USIM with FDN disable
28、d . 47 Definition and applicability . 47 Conformance requirement . 47 Test purpose 47 Method of test . 47 Initial conditions 47 Procedure . 48 Acceptance criteria 48 Enabling, disabling and updating of FDN 48 Definition and applicability . 48 Conformance requirement . 48 Test purpose 48 Method of te
29、st . 49 Initial conditions 49 49 49 49 . . . . 3GPP TS 31.121 version 3.5.0 Release 1999 5 ETSI TS 131 121 V3.5.0 (2003-03) 6.3.1 Terminal and USIM with BDN enabled . 49 ETSI 3GPP TS 31.121 version 3.5.0 Release 1999 6 ETSI TS 131 121 V3.5.0 (2003-03) 6.3.1.1 6.3.1.2 6.3.1.3 6.3.1.4 6.3.1.4.1 6.3.1.
30、4.2 6.3.1.5 6.3.2 6.3.2.1 6.3.2.2 6.3.2.3 6.3.2.4 6.3.2.4.1 6.3.2.4.2 6.3.2.5 6.4 6.4.1 6.4.1.1 6.4.1.2 6.4.1.3 6.4.1.4 6.4.1.4.1 6.4.1.4.2 6.4.1.5 6.4.2 6.4.2.1 6.4.2.2 6.4.2.3 6.4.2.4 6.4.2.4.1 6.4.2.4.2 6.4.2.5 6.4.3 6.4.3.1 6.4.3.2 6.4.3.3 6.4.3.4 6.4.3.4.1 6.4.3.4.2 6.4.3.5 6.4.4 6.4.4.1 6.4.4.
31、2 6.4.4.3 6.4.4.4 6.4.4.4.1 6.4.4.4.2 6.4.4.5 . Definition and applicability . 49 Conformance requirement . 49 Test purpose 50 Method of test . 50 Initial conditions 50 Procedure . 50 Acceptance criteria 50 Terminal and USIM with BDN disabled 51 Definition and applicability . 51 Conformance requirem
32、ent . 51 Test purpose 51 Method of test . Definition and applicabi Conformance requireme Method of test Maximum frequency of ACM updating 54 Definition and applicability . 54 Conformance requirement . 54 Test purpose 54 Method of test . 54 Initial conditions 54 Procedure . 55 Acceptance criteria 56
33、Call terminated when ACM greater than ACMmax . 56 Definition and applicability . 56 Conformance requirement . 56 Test purpose 56 Method of test . 56 Initial conditions 56 Procedure . 57 Acceptance criteria 58 Response codes of increase command of ACM 59 Definition and applicability . 59 Conformance
34、requirement . 59 Test purpose 59 Method of test . 59 Initial conditions 59 Procedure . 60 Acceptance criteria 61 . . . 7 PLMN related tests . 62 7.1 FPLMN handling 62 Adding FPLMN to the Forbidden PLMN list . 62 7.1.1 7.1.1.1 Definition and applicability . 62 7.1.1.2 Conformance requirement . 62 7.1
35、.1.3 Test purpose 62 Method of test . 63 7.1.1.4 7.1.1.4.1 Initial conditions 63 Procedure . 63 7.1.1.4.2 7.1.1.5 Acceptance criteria 64 UE updating forbidden PLMNs 65 7.1.2 7.1.2.1 Definition and applicability . 65 7.1.2.2 Conformance requirement . 65 . . ETSI 3GPP TS 31.121 version 3.5.0 Release 1
36、999 7 ETSI TS 131 121 V3.5.0 (2003-03) 7.1.2.3 7.1.2.4 7.1.2.4.1 7.1.2.4.2 7.1.2.5 7.1.3 7.1.3.1 7.1.3.2 7.1.3.3 7.1.3.4 7.1.3.4.1 7.1.3.4.2 7.1.3.5 7.2 7.2.1 7.2.1.1 7.2.1.2 7.2.1.3 7.2.1.4 7.2.1.4.1 7.2.1.4.2 7.2.1.5 7.2.2 7.2.2.1 7.2.2.2 7.2.2.3 7.2.2.4 7.2.2.4.1 7.2.2.4.2 7.2.2.5 7.2.3 7.2.3.1 7
37、.2.3.2 7.2.3.2.1 7.2.3.3 7.2.3.3.1 7.2.3.3.2 7.2.3.4 7.2.4 7.2.4.1 7.2.4.2 7.2.4.2.1 7.2.4.3 7.2.4.3.1 7.2.4.3.2 7.2.4.4 7.3 7.3.1 7.3.1.1 7.3.1.2 7.3.1.3 7.3.1.4 7.3.1.4.1 7.3.1.4.2 7.3.1.5 7.3.2 7.3.2.1 7.3.2.2 7.3.2.3 Test purpose . . 65 Method of test . 65 Initial conditions . . 65 Procedure . 6
38、6 . 67 . 67 Acceptance criteria . . 66 UE deleting forbidden PLMNs Definition and applicability. . Conformance requirement . 67 Test purpose . . 67 .67 Initial conditions . . 67 Procedure . 68 . 69 or list . 69 . 69 . 69 . 69 Initial conditions . . 69 Procedure . 69 Method of test UE updating the Us
39、er controlled PL Test purpose . . 69 Method of test Acceptance criteria . . 69 . . 72 .72 Initial conditions . .72 Procedure .73 Method of test Acceptance criteria . . 73 Definition and applicability. . Conformance requirement. . .74 Test purpose . .74 .74 Initial conditions . .74 Procedure .74 Acce
40、ptance criteria . . 75 . 75 Operator controlled PLMN selector handling . UE recognising the priority order of the Opera selector list. .75 Definition and applicability. . . 75 Conformance requirement . 75 Test purpose . . 76 .76 Initial conditions . . 76 Procedure .77 Acceptance criteria . . 77 .74
41、.74 Method of test Method of test PLMN selector list. . . 77 . 77 . 77 Test purpose . 77 ETSI 3GPP TS 31.121 version 3.5.0 Release 1999 8 ETSI TS 131 121 V3.5.0 (2003-03) 7.3.2.4 7.3.2.4.1 7.3.2.4.2 7.3.2.5 7.4 7.4.1 7.4.1.1 7.4.1.2 7.4.1.3 7.4.1.4 7.4.1.4.1 7.4.1.4.2 7.4.1.5 7.4.2 7.4.2.1 7.4.2.2 7
42、.4.2.3 7.4.2.4 7.4.2.4.1 7.4.2.4.2 7.4.2.5 7.5 7.5.1 7.5.1.1 7.5.1.2 7.5.1.3 7.5.1.4 7.5.1.4.1 7.5.1.4.2 7.5.1.5 Method of test . 78 Initial conditions . . . . . . . . . . . . . . . 78 Procedure 78 Acceptance criteria . 78 . . 79 . .79 . . 79 . . 79 . . . . . . . . . . . . . . . . . . . . . . . . .
43、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .79 . .79 . . 79 . . .79 80 GSM/UMTS dual mode UEs recognising the search period of the HPLMN . 8 1 . 81 . 81 HPLMN search handling . UE recognising the search period o Definition and applicability Confor
44、mance requirement . . . . . . Test purpose . Method of test Initial conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Method of test . . . . . . . . . . . . . . . . . . . . .
45、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
46、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Acceptance criteria . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
47、. . . . . . . . . . . . . . . . . . . . . . . . CT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Definition and applicability. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
48、 . . . . . . . . . . . . . . . . . . . . . Conformance requirement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Test purpose . . Method of test . Initial conditions . . . . . . . . . . . . . . .
49、. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Procedure . Acceptance criteria . . 8 8.1 8.1.1 8.1.1.1 8.1.1.2 8.1.1.3 8.1.1.4 8.1.1.4.1 8.1.1.4.2 8.1.1.5 8.1.2 8.1.2.1 8.1.2.2 8.1.2.3 Test purpose . . Method of test . 8.1.2.4 8.1.2.4.1 Initial conditions . . . . . . . .
