1、STD-ETSI EG 201 Obb-1-ENGL 1999 EG 201 066-1 V1.2.3 (1999-04) ETSI Guide Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSSl) protocol; Application of the Bearer Capability (BC), High Layer Compatibility (HLC) and Low Layer Compatibility (LLC) information e
2、lements; Part 1 : Test Suite Structure and Test Purposes (TSS Essential, orpotentially Essential, IPRs notified to ETSI in respect ofETsI standards“, which is available free of charge from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/www.etsi.org/ipr). Pursuant to
3、 the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in SR O00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Forew
4、ord This ETSI Guide (EG) has been produced by ETSI Technical Committee Signalling Protocols and Switching (SPS). The present document is part 1 of a multi-pari EG covering Digitai Subscriber Signalling System No. one (DSS1) protocol; Application of the Bearer Capability (EX), High Layer Compatibilit
5、y (HLC) and Low Layer Compatibility (UC) information elements; as identified below: Part 1: Part 2: “Test Suite Structure and Test Purposes (TSS8rTP) specification“; “Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT, proforma specification“. Introduc
6、tion The present document contains the Test Suite Structure and Test mirposes (TSS Application of the Bearer Capability (Bo, High Layer Compatibility (HLC) and Low Layer Compatibility (LLC) information elements by teds supporting ISDN services“. ISOIIEC 9646-1: “Information technology - Open Systems
7、 Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. CCITT Recommendation 1.41 1 (1988): “ISDN user-network interfaces - Reference configurations“. EN 300 403-1: “Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSSl)
8、protocol; Signallhg network layer for circuit mode basic call control; Part 1: Protocol specification ITU-T Recommendation 4.931 (1993), modified“. EN 300 267-1: “Integrated Services Digital Network (ISDN); Telephony 7 WZ, videotelephony, audiographic conference and videoconference teleservices; Dig
9、ital Subscriber Signalling System No. one (DSSI) protocol; Part 1: Protocol specification“. CCT Recommendation 1.1 12 (1988): “Vocabulary and tem for ISDNs“. CCT Recommendation E.164 (1988): “Numbering plan for the ISDN era“. CCITT Recommendation 1.210 (1988): “Principles of the telecommunication se
10、rvices supported by an ISDN and the means to describe them“. 21 i31 i41 PI i61 i71 81 191 ETS 300 007 (1991): “Integrated Services Digital Network (ISDN); Support of packet-mode terminai equipment by an ISDN. CCIT Recommendation V.110 (1992): “Support Of Data Terminal Equipments With V-Series Type I
11、nterfaces By An Integrated Services Digital Network. ITU-T Recommendation X.30 (1993): “Support of X.21, X.21 bis and X.20 bis based Data Terminal Equipments (DTEs) by an Integrated Services Digital Network (ISDN)“. ITU-T Recommendation Q.850 (1993): “Usage of cause and location in the Digital Subsc
12、riber Signalling SystemNo. 1 and the Signalling SystemNo. 7 ISDN user part“, i101 i111 i121 ETSI 8 E 201 066-1 V1.2.3 (1 999-04) i131 ISO/IEC 7776: “Information technology - Telecommunications and information exchange between systems - High-level data link control procedures - Description of the X.2
13、5 LAPB-compatible DTE data link procedures“. ISO/IEC 8208: “Information technology - Data communications - X.25 Packet Layer Protocol for Data Terminai Equipment“. i41 3 3.1 Definitions and abbreviations Definit ions For the purposes of the present document, the foliowing definitions apply: abstract
14、 test case: refer to ISOIIEC 9646-1 2 abstract test suite: refer to ISOIIEC 9646-1 2 active test: test case where the IUT is required to send a particular message, but not in reaction to a received message. This would usually involve the use of PIXIT information to see how this message can be genera
15、ted and quite often is specified in an Abstract Test Suite (ATS) using an Implicit Send event basic service: see CCIIT Recommendation 1.210 8 subclause 2.4 bearer service: see CCITT Recommendation 1.1 12 6, subclause 2.2 definition 202 and CCITT Recommendation 1.210 8 subclause 5.2.1 implementation
16、under test: refer to ISOIIEC 9646-1 2 Integrated Services Digital Network (ISDN): see CCT Recommendation 1.112 6, subclause 2.2 definition 308 international number: ISDN number structured as specified in subclause 3.2 ( in the subclauses relating to intemational number) of CCIlT Recommendation E.164
17、 7 ISDN number: number conforming to the numbering and structure specified in CCIIT Recommendation E.164 7. lower tester: refer to ISO/IEC 9646-1 2 national number; national significant number: ISDN number structured as specified in subclause 3.2 (in the subclauses relating to national significant n
18、umber) of CCIT Recommendation E.164 7 passive test: test case where the IUT is required to respond to a protocol event (e.g. received message) with another protocol event (sends message) and normally does not require an any special operator intervention such as is associated with the Jmplicit Send e
19、vent PICS proforma: refer to ISOIIEC 9646-1 2 PIXIT proforma: refer to ISOIIEC 9646- 1 2 point of control and observation: refer to ISOIIEC 9646-1 2 protocol implementation conformance statement: refer to ISO/IEC 9646-1 2 protocol implementation extra information for testing: refer to ISOKEC 9646-1
20、2 service: telecommunications service: see CCIlT Recommendation 1.1 12 6, subclause 2.2 definition 201 subscriber number: ISDN number structured as specified in subclause 3.2 (in the subclauses relating to subscriber number) of CCITT Recommendation E.164 7 system under test: refer to ISOIIEC 9646-1
21、2 ETSI 9 EO 201 066-1 V1.2.3 (1 999-04) Teleservice (telecommunication Service): see CCITT Recommendation 1.1 12 6, subclause 2.2 definition 203 and CClT Recommendation 1.210 8 subclause 5.2.1 TP refer to ISOAEC 9646-1 2 User (SIT): DSSl protocol entity at the User side of the user-network interface
22、 where a coincident S and T reference point applies User (T): DSC1 protocol entity at the User side of the user-network interface where a T reference point applies (User is the Private ISDN) user: DSSl protocol entity at the User side of the user-network interface where a T reference point or coinci
23、dent S and T reference point applies 3.2 Abbreviations For the purposes of the present document, the following abbreviations apply: ATS BC BS CdPN CdPS DSSl FTAM HDLC HLC IDU IE ISDN IUT LLC NPI PI PICS PElT PSPDN RPN TON TOS TP TS TSS TSS interface type: “basic interface“ for basic rate interface,
24、“other interface“ for primary rate interface; D-channel indicator: “the channel identified is not the D-channel“ ; Preferrdexclusive. Information channel selection, Coding standard, Numberhap, Channel typehap element type, Channel number and Slot map field, if present. coded according to test case n
25、eeds A channel identification information element with fields prefened/exclusive: “exclusive, oniy the indicated channel is acceptable“; D-channel indicator: “the channel identified is the D-channel“, Information channel selection: “no channel“: other field are coded as given for the B-channel ident
26、ification IE. codings as follows: codings as follows: 4 Test Suite Structure (TSS) EG 201 O18 Compatibility checking (1) BS speech (01) outgoing (1) inCQming (2) compatible (1) incompatible (2) BS 64 kbit/s UD1 (02) outgoing (1) incoming (2) compatible (1) incompatible (2) BS 3,l Wz audio (03) incom
27、ing (2) outgoing (1) compatible (1) incompatible (2) BS multiple-rate UD1 (04) outgoing (1) incoming (2) compatible (1) incompatible (2) BS packet mode B-channel(O5) outgoing (1) incoming (2) compatible (1) incompatible (2) BS packet mode D-channel(O6) incoming (1) compatible (1) incompatible (2) TP
28、101 1Oxx TP1012lxx TP10122xx TP1021oxx TP10221xx TP10222xx TP103 1 Oxx TP10321xx TP10322xx TP1041Oxx TP10421xx TP10422xx TP1051Oxx TP10521xx TP10522xx TP106llxx TPl06 12xx ETSI 13 TS telephony 3,l kHz (07) outgoing (1) incoming (2) compatible (1) incompatible (2) TS telephony 7 Wz (08) outgoing (1)
29、*incoming (2) fallback not allowed (1) fallback allowed (2) compatible, fallback not allowed (1) compatible, fallback allowed (2) incompatible, fallback not allowed (3) incompatible, fallback allowed (4) TS videotelephony (09) outgoing (1) *incoming (2) failback not allowed (1) fallback allowed (2)
30、compatible, fallback not allowed (1) compatible, fallback allowed (2) incompatible, fallback not allowed (3) incompatible, fallback allowed (4) TS videoconference (10) outgoing (1) *incoming (2) fallback not allowed (1) fallback allowed (2) compatible, fallbacknot allowed (1) compatible, fallback al
31、lowed (2) incompatible, fallback not allowed (3) incompatible, fallback allowed (4) TS audiographic conference (1 i) *outgoing (1) incoming (2) fallback not allowed (1) fallback allowed (2) compatible, fallback not allowed (1) compatible, fallback allowed (2) incompatible, fallback not allowed (3) i
32、ncompatible, fallback allowed (4) TS telefax G2/3 (12) outgoing (1) incoming (2) compatible (1) incompatible (2) TS telefax G4 (1 3) outgoing (1) incoming (2) compatible (1) incompatible (2) 0393279 288 o EG 201 066-1 V1.2.3 (1 999-04) “107 1 Oxx TP10721xx TP10722xx TP108llxx W108 12xx TP10821xx TP
33、10822xx TP10823xx TP10824xx TP109llxx TP109 12xx TP10921xx TP10922xx TP10923xx TP10924xx TPllOllXX TP11012xx TP11021xx TP11022xx TP11023xx TP11024xx TP111 llxx TP11112xx TP11121xx TP11122xx TP11123xx TP11124xx TP112lOxx TP11221xx TP11222xx TP113lOxx TP11321xx TPl 1322xx ETSI STD*ETSI EG 2OL Obb-L-EN
34、GL 1399 3400855 0399280 TTT 14 EG 201 066-1 V1.2.3 (1999-04) TS syntax-based videotex (14) outgoing (1) incoming (2) compatible (1) incompatible (2) -TS RAM (15) outgoing (1) incoming (2) compatible (1) incompatible (2) TS emfile transfer (1 6) outgoing (i) incoming (2) compatible (1) incompatible (
35、2) TS teletex (17) outgoing (1) incoming (2) compatible (1) incompatible (2) User applications using rate adaptions (1 8) outgoing (1) incoming (2) compatible (1) incompatible (2) TP11410xx TP11421xx TP11422xx TP115lOxx TP11521xx TP11522xx TP116lOxx TP11621xx TP11622xx TP117lOxx TP11721xx TP11722xx
36、TP118lOxx TP11821xx “1 1822xx Interworking with networks supporting BS 64 kbis RI (19) outgoing (1) TP1191Oxx compatible (1) TP11921xx incompatible (2) TP11922xx incoming (2) TS multimedia services (20) outgoing (1) *incoming (2) failback not allowed (i) TP1201 lxx fallback allowed (2) TP12012xx Com
37、patible, fallback not allowed (1) TP12021xx compatible, fallback allowed (2) TP12022xx TP12023xx incompatible, fallback allowed (4) TP12024xx incompatible, fallback not allowed (3) Address checkhg (2) Called party number (01) incoming (2) compatible (1) incompatible (2) omitted (3) Called party suba
38、ddress (02) incoming (2) compatible (1) incompatible (2) omitted (3) TP20121xx “20122xx “20 123xx TP20221xx TP20222xx TP20223xx ETSI STD ETSI EG 203 Obb-3-ENGL Il977 = 3400855 0399283 936 15 EG 201 066-1 V1.2.3 (1 999-04) Checking of WI (3) incoming (2) compatible (i) incompatible (2) omitted (3) TP
39、30021xx TP30022xx TP30023xx NOTE: Numbers h brackets represent group numbers and are used in Test Purpose identifiers. 5 5.1 Test Purposes (TP) I nt rod uct i on Test purposes are grouped in several steps. In the Fit step TPs are grouped according to the type of the test (compatibility checking, add
40、ress checking or checking based on UUI). Test purposes for compatibility checking are further grouped according to basic services to be tested, the direction of the call, does the IUT support or does not support the given basic service (compatible or incompatible With the type of the call) and if ap
41、propriate according to additional capabilities (e.g. support of the faiiback function). At the outgoing call direction for a given terminal equipment is tested for each service in the set of basic services and applications (e.g. rate adaption) supported by the Terminal Ekpipment (TE) for outgoing ca
42、lls. At the incoming call direction each basic service and application considered by the base document(s) are tested. For services and applications supported by the TE the “compatible“ subgroup shall be selected, for services and applications not supported by the TE! the “incompatible“ subgroup shal
43、l be chosen, Test purposes in the “address checking“ and “checking of UUI“ groups are basic service independent and selected based on the terminal equipment capability to support these optional functions. 5.1.1 Test Purpose (TP) naming convention Test Purposes are numbered, starting at 001, within e
44、ach group. Groups are organized according to the TSS (see table 1). Table 1: TP Identifier naming convention scheme 1 digit field representing the type of the test 1 = compatibility checking 2 = address checking 3 = checking of UUI 2 digit field representing group reference according to TSS (basic s
45、ervice for compatibility checking and the type address information for address checking) 1 digit field representing the type of the call 1 = outgoing call 2 = incoming call 1 digit field representing the type of the test sequential number (O1 -99) Identifier: TPcCheckingcGroupcCall typexTest type an
46、 5.1.2 Source of TP definition The TFs are based on EG 201 018 i, EN 300 403-1 4 and EN 300 267-1 5. EG 201 018 i describes the combinations of codings for the BC, LLC and HLC information elements to be used by terminal equipments at the calhg side and expected at the called side. The codings of the
47、 BC, HLC and LLC information elements used in TPs are based on these combinations; and the decision regarding TE! conformance to different basic services is based on these combinations. E TSI STD-ETSI EG 201 Obb-1-ENGL 1999 W 3400855 0399262 672 IUT supports / does not support for outgoing / incomin
48、g calls (note) Ensure that that the IUT in c BC value(s) to be expected I The principies and procedures of compatibility and address checking is defined in EN 300 403-1 4, subclauses 5.2.2 and B.3.3 for circuit mode calls and in ETS 300 007 9, subclause 4.3 for packet mode calis. Compatibility check
49、ing consists of the capability of the TE to use the correct BC, HLC and LLC information elements when requesting different basic telecommunication services from the network and the capability to check its own compatibility based on the BC, HLC and LLC information elements with the instance of a call offered by the network. In Tps for compatibility checking only subclause of EG 201 O1 8 containhg the relevant codings is referenced. Address checking is an optional procedure for TES at the called user side to increase mu
