1、ETSI EN 300 523 V4.11 .I (2000-12) European Standard (Telecommunications series) Digital cellular telecommunications system (Phase 2); Numbering, addressing and identification (GSM 03.03 version 4.1 1 .I) (GSM 03.03 version 4.1 1 .l) The preser documer 2 ETSI EN 300 523 V4.11.1 (2000-1 2) Reference
2、REN/TSG N-040303P R3 Keywords Digital cellular telecommunications system, Global System for Mobile communications (GSM) ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 O0017 - NAF 742 C Association but non lucrat
3、if enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi. org nay be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between
4、such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be sub
5、ject to revision or change of status. Information on the current status of this and other ETSI documents is available at htip./w.elsj.orq/lb/status/ If you find errors in the present document, send your comment to: editor et.si.fr Copvriaht Notification No part may be reproduced except as authorized
6、 by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Telecommunications Standards Institute 2000. All rights reserved. ETSI (GSM 03.03 version 4.1 1 . 1) 3 ETSI EN 300 523 V4.11.1 (2000-1 2) Contents Intellectual Property Rights . 4 Fore
7、word 4 1 1.1 1.2 1.3 1.4 1.5 2 2.1 2.2 2.3 2.4 2.5 3 3.1 3.2 3.3 3.4 3.5 3.6 4 4.1 4.2 4.2.1 4.2.2 4.3 4.4 5 5.1 5.2 6 6.1 6.2 6.2.1 6.2.2 6.3 introduction . 5 Scope 5 References 5 Definitons and abbreviations 6 General comments to references . 6 Conventions on bitorderhg 6 Identification of mobile
8、subscribers 6 General . 6 Composition of IMSI 7 Allocation principles 7 Structure of TMSI 7 Structure of LMSI 8 Numbering plan for mobile stations 8 General . 8 Numbering plan requirements 8 Structure of mobile station international PSTNDSDN number (MSISDN) 9 Mobile Station Roaming Number (MSRN) for
9、 PSTNDSDN routeing . 9 Structure of Mobile Station International Data Number . 10 Handover Number 10 Identification of location areas and base stations 10 Base station identification 10 Cell Identity (CI) and Cell Global Identification (CGI) 10 Regional Subscription Zone Identity (RSZI) 11 Location
10、Number 12 Identification of MSCs and location registers . 12 Identification for routing purpose . 12 Identification of HLR for HLR restoration application 12 International mobile station equipment identity and software version number . 12 General . 12 Composition of IMEI and IMEISV 13 Composition of
11、 the Location Area Identification (LAI) . 10 Base Station Identify Code SIC) . 11 Composition of IMEI 13 Composition of IMEISV . 13 Allocation principles 14 Annex A (informative): A.l A.2 A.3 Colour Codes . 15 Utilisation of the BSIC 15 Guidance for planning . 15 Example of PLMN Colour Codes (NCCs)
12、for the European region . 16 History . 17 ETSI (GSM 03.03 version 4.1 1 .l) 4 ETSI EN 300 523 V4.11.1 (2000-1 2) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is
13、 publicly available for ETSI members and non-members, and can be found in ETSI SR O00 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the
14、 ETSI Web server (-). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR O00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, es
15、sential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Technical Committee Special Mobile Group (SMG). The present document defines the plans and principles of numbering, addressing and identification within the European digital cellula
16、r telecommunications system (Phase 2). The present document corresponds to GSM Technical Specification (GSM-TS) GSM 03.03 version 4.9.0. The specification from which the present document has been derived was originally based on CEPT documentation, hence the presentation of the present document may n
17、ot be entirely in accordance with the ETSIPNE rules. Reference is made within the present document to GSM-TSs (NOTE). NOTE: TC-SMG has produced documents which give the technical specifications for the implementation of the European digital cellular telecommunications system. Historically, these doc
18、uments have been identified as GSM Technical Specifications (GSM-TSs). These TSs may have subsequently become I-ETSs (Phase l), or ETSs (Phase 2), whilst others may become ETSI Technical Reports (ETRs). GSM-TSs are, for editorial reasons, still referred to in GSM ETSs. National transposition dates D
19、ate of adoption of this EN: Date of latest announcement of this EN (doa): Date of latest publication of new National Standard or endorsement of this EN (dop/e): Date of withdrawal of any conflicting National Standard (dow): O1 December 2000 3 1 March 200 1 30 September 2001 30 September 2001 ETSI (G
20、SM 03.03 version 4.1 1 .l) 5 ETSI EN 300 523 V4.11.1 (2000-1 2) 1 1 .I Introduction Scope The present document defines: a) an identification plan for mobile subscribers in the GSM system; b) principles of assigning telephone and ISDN numbers to mobile stations in the country of registration of the m
21、obile station; c) principles of assigning mobile station roaming numbers to visiting mobile stations; d) an identification plan for location areas and base stations in the GSM system; e) an identification plan for MSCs and location registers in the GSM system; f) principles of assigning internationa
22、l mobile equipment identities; g) principles of assigning zones for regional subscription. 1.2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are either specific (identified by date of publication
23、, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. i
24、l GSM O 1 .O4 (ETR 100): “European digital cellular telecommunications system (Phase 2); Abbreviations and acronyms“. Pl GSM 03.08 (ETS 300 526): “European digital cellular telecommunications system (Phase 2); Organisation of subscriber data“. GSM 03.20 (ETS 300 534): “European digital cellular tele
25、communications system (Phase 2); Security related network functions“. GSM 03.70 (ETS 300 541): “European digital cellular telecommunications system (Phase 2); Routeing of calls to/from Public Data Networks (PDN)“. 31 41 Pl GSM 04.08 (ETS 300 557): “European digital cellular telecommunications system
26、 (Phase 2); Mobile radio interface layer 3 specification“. 61 GSM 09.03 (ETS 300 600): “European digital cellular telecommunications system (Phase 2); Signalling requirements on interworking between the Integrated Services Digital Network (ISDN) or Public Switched Telephone Network (PSTN) and the Pu
27、blic Land Mobile Network (PLMN)“. GSM 11.1 1 (ETS 300 608): “European digital cellular telecommunications system (Phase 2); Specification of the Subscriber Identity Module - Mobile Equipment (SIM - ME) interface“. CCITT Recommendation E. 164: “Numbering plan for the ISDN era“. CCITT Recommendation E
28、.212: “Identification plan for land mobile stations“. ETSI (GSM 03.03 version 4.1 1 .l) 6 ETSI EN 300 523 V4.11.1 (2000-1 2) IO1 CCITT Recommendation E.213: “Telephone and ISDN numbering plan for land mobile stations in public land mobile networks (PLMN)“. CCITT Recommendation X. 121: “International
29、 numbering plan for public data networks“. i 11 1.3 Def initons and abbreviations Abbreviations used in the present document are listed in GSM 01.04. 1.4 General comments to references The identification plan for mobile subscribers defined below is that defined in CCITT Recommendation E.212. The ISD
30、N numbering plan for mobile stations and the allocation of mobile station roaming numbers is that defined in CCITT Recommendation E.213. Only one of the principles for allocating ISDN numbers is proposed for GSM PLMNs. Only the method for allocating mobile station roaming numbers contained in the ma
31、in text of CCITT Recommendation E.213 is recommended for use in GSM PLMNs. If there is any difference between this Technical Specification and the CCITT Recommendations, the former shall prevail. For terminology, see also CCITT Recommendations E.164 and X.121. 1.5 Conventions on bitordering The foll
32、owing conventions hold for the coding of the different identities appearing in this Technical Specification and in other GSM Technical Specifications if not indicated otherwise: - - the different parts of an identity are shown in the figures in order of significance; the most significant part of an
33、identity is on the left part of the figure and the least significant on the right. When an identity appears in other Technical Specifications, the following conventions hold if not indicated otherwise: - - digits are numbered by order of significance, with digit 1 being the most significant; bits ar
34、e numbered by order of significance, with the lowest bit number corresponding to the least significant bit. 2 Identification of mobile subscribers 2.1 General A unique International Mobile Subscriber Identity (IMSI) shall be allocated to each mobile subscriber in the GSM system. NOTE: This IMSI is t
35、he concept referred to by CCITT as “International Mobile Station Identity“. In order to support the subscriber identity confidentiality service the VLRs may allocate a unique Temporary Mobile Subscriber Identity (TMSI) to visiting mobile subscribers. The VLR must be capable of correlating the IMSI o
36、f an MS and the current TMSI for that MS. In order to speed up the search for subscriber data in the VLR a supplementary Local Mobile Station Identity (LMSI) is defined. The LMSI may be allocated by the VLR at location updating and is sent to the HLR together with the IMSI. The HLR makes no use of i
37、t but includes it together with the IMSI in all messages sent to the VLR concerning that MS. ETSI (GSM 03.03 version 4.1 1 .l) 7 ETSI EN 300 523 V4.11.1 (2000-1 2) 2.2 Composition of IMSI IMSI is composed as shown in figure 1. Not more than 15 digits II II II 3 digits 2 digits m-1 MSIN NMS I II II I
38、MSI Figure 1 : Structure of IMSI IMSI is composed of three parts: i) Mobile Country Code (MCC) consisting of three digits. The MCC identifies uniquely the country of domicile of the mobile subscriber; ii) Mobile Network Code (MNC) consisting of two digits for GSM applications. The MNC identifies the
39、 home GSM PLMN of the mobile subscriber; iii) Mobile Subscriber Identification Number (MSIN) identifying the mobile subscriber within a GSM PLMN. The National Mobile Subscriber Identity (NMSI) consists of the Mobile Network Code and the Mobile Subscriber Identification Number. 2.3 Allocation princip
40、les IMSI shall consist of numerical characters (O through 9) only. The overall number of digits in IMSI shall not exceed 15 digits. The allocation of Mobile Country Codes (MCCs) is administered by the CCITT and is given in Annex A to CCITT Blue Book Recommendation E.212. The allocation of National M
41、obile Subscriber Identity (NMSI) is the responsibility of each administration. If more than one GSM PLMN exist in a country, a unique Mobile Network Code should be assigned to each of them. The allocation of IMSIs should be such that not more than the digits MCC + MNC of the IMSI have to be analysed
42、 in a foreign GSM PLMN for information transfer. 2.4 Structure of TMSI Since the TMSI has only local significance (i.e. within the VLR and the area controlled by the VLR), the structure and coding of it can be chosen by agreement between operator and manufacturer in order to meet local needs. The TM
43、SI consists of 4 octets. It can be coded using a full hexadecimal representation. In order to avoid double allocation of TMSIs after a restart of a VLR, some part of the TMSI may be related to the time when it was allocated or contain a bit field which is changed when the VLR has recovered from the
44、restart. The TMSI shall only be allocated in ciphered form. See also Technical Specification GSM 03.20. The newtwork shall not allocate a TMSI with all 32 bits equal to 1 (this is because the TMSI must be stored in the SIM, and the SIM uses 4 octets with all bits equal to 1 for indicating that no va
45、lid TMSI is available. ETSI (GSM 03.03 version 4.1 1 .l) 8 ETSI EN 300 523 V4.11.1 (2000-1 2) 2.5 Structure of LMSI The LMSI consists of 4 octets and may be allocated by the VLR. 3 3.1 Numbering plan for mobile stations General Below the structure of the numbers used by a subscriber of a fixed (or m
46、obile) network for calling a mobile station of a GSM PLMN is defined. Also the structure of mobile station roaming numbers is defined. One or more numbers of the ISDN numbering plan shall be assigned to a mobile station to be used for all calls to that station. There may be a need for Mobile Station
47、s (MS) to have a X. 121 number. Because the MS has to have in any case a number from the ISDN numbering plan, the X.121 number will be in addition. Implications on numbering interworking functions which may need to be provided by the PLMN (if the use of X.121 numbers is required) are indicated in Te
48、chnical Specification GSM 03.70. NOTE: For card operated stations the ISDN number should be assigned to the holder of the card (personal number). 3.2 Numbering plan requirements In principle, it should be possible for any subscriber of the ISDN or PSTN to call any mobile station in a GSM PLMN. This
49、implies that ISDN numbers for mobile stations should comply with the ISDN numbering plan in each country. The ISDN numbers of mobile stations should be composed in such a way that standard ISDNPSTN charging can be used for calls to mobile stations. It should be possible for each administration to develop its own independent numbering plan for mobile stations. The numbering plan should not limit the possibility for mobile stations to roam among GSM PLMNs. It should be possible to change the IMSI without changing the ISDN number allocated to a mobile station and vice versa. In p
