ETSI EN 300 965-2000 Digital Cellular Telecommunications System (Phase 2+) Full Rate Speech Voice Activity Detector (VAD) for Full Rate Speech Traffic Channels (GSM 06 32 Version 8_1.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

AGMA 05FTM02-2005 The Effects of Pre Rough Machine Processing on Dimensional Distortion During Carburizing《渗碳期间预粗糙机械加工对空间扭曲的影响》.pdf

AGMA 05FTM03-2005 Modelling Gear Distortion《齿轮扭曲成模》.pdf

AGMA 05FTM04-2005 Tooth Meshing Stiffness Optimisation Based on Gear Tooth Form Determination for a Production Process Using Different Tools《用不同工具生产加工基于齿轮齿成型测定的齿啮合刚度优化》.pdf

AGMA 05FTM05-2005 Computerized Design of Face Hobbed Hypoid Gears Tooth Surfaces Generation Contact Analysis and Stress Calculation《端面滚铣准双曲面齿轮的计算机处理设计 齿面生成、接触分析和应力计算》.pdf

AGMA 05FTM06-2005 A Model to Predict Friction Losses of Hypoid Gears《准双曲面齿轮的预测摩擦损失模型》.pdf

AGMA 05FTM07-2005 Spiral Bevel and Hypoid Gear Cutting Technology Update《螺旋锥齿和准双曲面齿轮切削技术升级》.pdf

AGMA 05FTM08-2005 New Developments in Tooth Contact Analysis (TCA) and Loaded TCA for Spiral Bevel and Hypoid Gear Drives《齿面接触分析(TCA)新设计和螺旋锥齿及准双曲面齿轮驱动用加载的TCA》.pdf

AGMA 05FTM09-2005 Hypoid Gear Lapping Wear Coefficient and Simulation《准双曲面齿轮研磨磨损系数与仿真》.pdf

AGMA 05FTM10-2005 Finite Element Study of the Ikona Gear Tooth Profile《Ikona齿轮齿轮廓的有限元研究》.pdf