1、ETSI EN 301 823-1 -1 1.1.1 (2001-01) European Standard (Telecommunications series) Broadband Radio Access Networks (BRAN); HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) protocol; Part 1: Basic data transport function; Sub-part 1 : Protocol Implementation Conformance Statement
2、(PICS) proforma 2 ETSI EN 301 823-1 -1 V1.l.l (2001-01) Tt- Reference D EN/B RAN-002T004- 1 - 1 Keywords access, control, data, HIPERLAN, PICS, radio ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 74
3、2 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the present document can be downloaded from: present document may be made available in more than one electronic version or in print. In any case of existing perceived differe
4、nce in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that
5、 the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at :/.$./$/ If you find errors in the present document, send your comment to: editor etsi.fr Copyright Notification No part may be reproduced except as author
6、ized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. 8 European Telecommunications Standards Institute 2001. All rights reserved. ETSI 3 ETSI EN 301 823-1 -1 V1.l.l (2001-01) Contents Intellectual Property Rights 5 Foreword 5 Introduction 5 1 S
7、cope 6 2 References 6 3 Definitions and abbreviations 6 3.1 Definitions 6 3.2 Abbreviations 7 4 Conformance to this PICS proforma specification . 7 Protocol ICs proforma for TS 101 761-1 8 Annex A (normative): A . 1 A.l.l A . 1.2 A.1.3 A.2 A.2.1 A.2.2 A.2.3 A.2.4 A.2.5 A.2.6 A . 3 A.4 AS A . 6 A.6.1
8、 Guidance for completing the PICS proforma . 8 Purposes and structure . 8 Abbreviations and conventions 8 Instructions for completing the PICS proforma 10 Date of the statement . 10 Identification of the implementation 10 Implementation Under Test (IUT) identification 10 System Under Test (SUT) iden
9、tification 11 Product supplier 11 Client (if different from product supplier) 11 PICS contact person 12 Identification of the TS 101 761-1 V1.l.l . 12 Global statement of conformance 13 Roles 13 PICS for Mobile Terminal MT or Access Point AP . 13 Major capabilities 13 A.6.1.1 A.6.1.1.1 A.6.1.1.2 A.6
10、.1.1.3 A.6.1.1.4 A.6.1.1.5 A.6.1.2 A.6.1.2.1 A.6.1.2.2 A.6.1.2.3 A.6.1.2.4 A.6.1.2.5 A.6.1.3 A.6.1.3.1 A.6.1.3.2 A.6.1.3.3 A.6.1.3.4 A.6.1.3.5 A.6.2 PDU descriptions 18 A.6.3 PDUparameters 18 A.6.3.1 A.6.3.2 Parameters of ARQ-feedback-Down PDUs . 18 A.6.3.3 Acknowledged mode procedures 13 Acknowledg
11、ed mode . transmitter capabilities . 14 Acknowledged mode . receiver capabilities . 15 Acknowledged mode . messages . 15 Repetition mode procedures . 16 Repetition mode . transmitter capabilities 16 Repetition mode . receiver capabilities 16 Repetition mode . logical channel for data flow . 16 Repet
12、ition mode . logical channel for control flow 16 Unacknowledged mode . transmitter capabilities . 17 Unacknowledged mode . receiver capabilities . 17 Unacknowledged mode . logical channel for data flow 17 Unacknowledged mode . logical channel for control flow 17 Unacknowledged mode . messages . 18 P
13、arameters of ARQ-feedback-UP PDUs 18 Parameters of Discard-UP PDUs 19 Acknowledged mode . logical channel for data flow 15 Acknowledged mode . logical channel for control flow . 15 Repetition mode . messages 17 Unacknowledged mode procedures 17 ETSI 4 ETSI EN 301 823-1 -1 V1.l.l (2001-01) A.6.3.4 Hi
14、story . 20 Parameters of Discard-Down PDUs . 19 ETSI 5 ETSI EN 301 823-1 -1 V1.l.l (2001-01) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available
15、for ETSI members and non-members, and can be found in ETSI SR O00 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server Cla
16、ttD:/www.etsP.c/iDr. Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR O00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, ess
17、ential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ETSI Project Broadband Radio Access Networks (BRAN). The present document is part 1, sub-part 1 of a multi-part deliverable covering Broadband Radio Access Networks (BRAN); HIPERLAN Type
18、2; Conformance testing for the Data Link Control (DLC) protocol; Part 1: Basic data transport function, as identified below: Each part consists of the following sub-parts: Sub-part 1: “Protocol Implementation Conformance Statement (PICS) proforma“; Sub-part 2: “Test Suite Structure and Test Purposes
19、 (TSS Sub-part 3: “Abstract Test Suite (ATS) specification“. National transposition dates Date of adoption of this EN Date of latest announcement of this EN (doa): Date of latest publication of new National Standard or endorsement of this EN (dop/e): Date of withdrawal of any conflicting National St
20、andard (dow): 19 January 2001 30 April 2001 31 October 2001 31 October 2001 Introduction To evaluate conformance of a particular implementation, it is necessary to have a statement of which capabilities and options have been implemented for a telecommunication specification. Such a statement is call
21、ed a Protocol Implementation Conformance Statement (PICS). ETSI 6 ETSI EN 301 823-1 -1 V1.l.l (2001-01) 1 Scope The present document provides the Protocol Implementation Conformance Statement (PICS) proforma for BRAN HIPERLAN Type 2; Conformance testing for the Data Link Control (DLC) protocol, Part
22、 1: Basic data transport function, as defined in TS 101 761-1 i in compliance with the relevant requirements, and in accordance with the relevant guidance given in ISO/IEC 9646-7 4 and ETS 300 406 2. It details (in tabular form) the implementation options, i.e. the optional functions additional to t
23、hose which are mandatory to implement. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present documen t. References are either specific (identified by date of publication, edition number, version number, etc.) or non-specif
24、ic. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. A non-specific reference to an ETS shall also be taken to refer to later versions published as an EN with the same number. 111 ETSI TS 101 761-1 (Vl.l.1): “Broadband Radio Acces
25、s Networks (BRAN); HIPERLAN Type 2; Data Link Control (DLC) Layer; Part 1: Basic Data Transport Functions“. ETSI ETS 300 406 (1995): “Methods for Testing and Specification (MTS); Protocol and profile conformance testing specifications; Standardization methodology“. ISO/IEC 9646-1: “Information techn
26、ology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 121 131 141 3 3.1
27、 Definitions and abbreviations Def i n it ions For the purposes of the present document, the following terms and definitions apply: - - terms defined in TS 101 761-1 i; terms defined in ISO/IEC 9646-1 3 and in ISO/IEC 9646-7 4. In particular, the following terms defined in ISO/IEC 9646-1 3 apply: Im
28、plementation Conformance Statement (ICs): statement made by the supplier of an implementation or system claimed to conform to a given specification, stating which capabilities have been implemented. The ICs can take several forms: protocol ICs, profile ICs, profile specific ICs, information object I
29、Cs, etc ICs proforma: document, in the form of a questionnaire, which when completed for an implementation or system becomes an ICs Protocol ICs (PICS): ICs for an implementation or system claimed to conform to a given protocol specification ETSI 7 ETSI EN 301 823-1 -1 V1.l.l (2001-01) 3.2 Abbreviat
30、ions For the purposes of the present document, the following abbreviations apply: AP ARQ BCH cc CL DCC DCCH DLC EC ICs IUT LCCH LCH MAC MT PDU PHY PICS RLC RSS SCH SCS SUT Access Point Automatic Repeat Request Broadcast CHannel Central Controller Convergence Layer DLC user Connection Control Dedicat
31、ed Control CHannel Data Link Control Error Control Implementation Conformance Statement Implementation Under Test Link Control CHannel Long CHannel Medium Access Control Mobile Terminal Protocol Data Unit Physical layer Protocol ICs Radio Link Control Received Signal Strength Short CHannel System Co
32、nformance Statement System Under Test 4 Conformance to this PICS proforma specification If it claims to conform to the present document, the actual PICS proforma to be filled in by a supplier shall be technically equivalent to the text of the PICS proforma given in Annex A, and shall preserve the nu
33、mberinghaming and ordering of the proforma items. A PICS which conforms to the present document shall be a conforming PICS proforma completed in accordance with the guidance for completion given in Clause A. 1. ETSI 8 ETSI EN 301 823-1 -1 V1.l.l (2001-01) Annex A (normative): Protocol ICs proforma f
34、or TS 101 761-1 Notwithstanding the provisions of the copyright clause related to the text of the present document, ETSI grants that users of the present document may freely reproduce the PICS proforma in this annex so that it can be used for its intended purposes and may further publish the complet
35、ed PICS. A.l Guidance for completing the PICS proforma A.1 .I Purposes and structure The purpose of this PICS proforma is to provide a mechanism whereby a supplier of an implementation of the requirements defined in TS 101 761-1 i may provide information about the implementation in a standardized ma
36、nner. The PICS proforma is subdivided into subclauses for the following categories of information: - - identification of the implementation; - - global statement of conformance; - roles; guidance for completing the PICS proforma; identification of the TS 101 761-1 i; - major capabilities; - PDUS; -
37、PDU parameters. A. 1.2 Abbreviations and conventions The PICS proforma contained in this annex is comprised of information in tabular form in accordance with the guidelines presented in ISO/IEC 9646-7 4. Item column The item column contains a number which identifies the item in the table. Item descr
38、iption column The item description column describes in free text each respective item (e.g. parameters, timers, etc.). It implicitly means “is supported by the implementation?“. Status column The following notations, defined in ISO/IEC 9646-7 4, are used for the status column: m O n/a X mandatory -
39、the capability is required to be supported. optional - the capability may be supported or not. not applicable - in the given context, it is impossible to use the capability. prohibited (excluded) - there is a requirement not to use this capability in the given context. ETSI 9 ETSI EN 301 823-1 -1 V1
40、.l.l (2001-01) 0.i qualified optional - for mutually exclusive or selectable options from a set. “i“ is an integer which identifies a unique group of related optional items and the logic of their selection which is defined immediately following the table. conditional - the requirement on the capabil
41、ity (“m“, “o“, “x“ or “n/a“) depends on the support of other optional or Conditional items. “i“ is an integer identifying a unique conditional status expression which is defined immediately following the Table. ci 1 irrelevant (out-of-scope) - capability outside the scope of the reference specificat
42、ion. No answer is requested from the supplier. NOTE 1: This use of “i“ status is not to be confused with the suffix “i“ to the “o“ and “c“ statuses above. Reference column The reference column makes reference to TS 101 761-1 i, except where explicitly stated otherwise. Support column The support col
43、umn shall be filled in by the supplier of the implementation. The following common notations, defined in ISOAEC 9646-7 4, are used for the support column: Y or y N or n N/A, n/a or - supported by the implementation. not supported by the implementation. no answer required (allowed only if the status
44、is n/a, directly or after evaluation of a conditional status). If this PICS proforma is completed in order to describe a multiple-profile support in a system, it is necessary to be able to answer that a capability is supported for one profile and not supported for another. In that case, the supplier
45、 shall enter the unique reference to a conditional expression, preceded by “?“ (e.g. ?3). This expression shall be given in the space for comments provided at the bottom of the table. It uses predicates defined in the SCS, each of which refers to a single profile and which takes the value TRUE if an
46、d only if that profile is to be used. EXAMPLE 1: NOTE 2: As stated in ISO/IEC 9646-7 4, support for a received PDU requires the ability to parse all valid parameters of that PDU. Supporting a PDU while having no ability to parse a valid parameter is non-conformant. Support for a parameter on a PDU m
47、eans that the semantics of that parameter are supported. ?3: IF prof1 THEN Y ELSE N Values allowed column The values allowed column contains the type, the list, the range, or the length of values allowed. The following notations are used: - range of values: example: 5 20 - list of values: , , ., exa
48、mple: 2,4,6 ,8,9 example: example: “OA“H, “34“H, “2F“H “ 1 1 O 1 “B, “ 1 O1 1 “B, “ 1 1 1 1 “B - list of named values: (), (), ., () example: reject(l), accept(2) - length: example: size ( ) size (1 8) ETSI 10 ETSI EN 301 823-1 -1 V1.l.l (2001-01) Values supported column The values supported column
49、shall be filled in by the supplier of the implementation. In this column, the values or the ranges of values supported by the implementation shall be indicated. References to items For each possible item answer (answer in the support column) within the PICS proforma a unique reference exists, used, for example, in the conditional expressions. It is defined as the table identifier, followed by a solidus character “/“, followed by the item number in the Table. If there is more than one support column in a table, the columns are discri
