1、 ETSI EN 301 908-18 V11.1.1 (2016-07) IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS) HARMONISED EUROPEAN STANDARD ETSI ETSI EN 301 908-18 V11.1.
2、1 (2016-07) 2 Reference REN/MSG-TFES-11-18-RED Keywords 3G, 3GPP, cellular, digital, EDGE, E-UTRA, GSM, IMT, IMT-2000, IMT-Advanced, LTE, mobile, MSR, radio, regulation, UMTS, UTRA, WCDMA ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47
3、16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in pr
4、int. The content of any electronic and/or print versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the
5、Portable Document Format (PDF) version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/p
6、ortal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electr
7、onic or mechanical, including photocopying and microfilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telec
8、ommunications Standards Institute 2016. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM a
9、nd the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI EN 301 908-18 V11.1.1 (2016-07) 3 Contents Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g3Introduction 6g31 Scope 7g32 References 7g32.1 Normative references . 7g32.2 Informative referenc
10、es 9g33 Definitions, symbols and abbreviations . 9g33.1 Definitions 9g33.2 Symbols 12g33.3 Abbreviations . 12g34 Technical requirements specifications . 14g34.1 Environmental profile . 14g34.2 Conformance requirements 14g34.2.1 Introduction. 14g34.2.2 Operating band unwanted emissions 17g34.2.2.1 De
11、finition 17g34.2.2.2 Limits 17g34.2.2.2.1 Limits for Band Categories 1 and 3 . 17g34.2.2.2.2 Limits for Band Category 2 . 22g34.2.2.2.3 Limits for GSM/EDGE single-RAT operation 27g34.2.2.2.4 Limits for protection of DTT . 28g34.2.2.2.5 Limits for co-existence with services in adjacent frequency band
12、s . 28g34.2.2.2.6 Limits for operation in Band 32 28g34.2.2.3 Conformance . 29g34.2.3 Adjacent Channel Leakage power Ratio (ACLR) 29g34.2.3.1 Definition 29g34.2.3.2 Limits 29g34.2.3.2.1 E-UTRA limits 29g34.2.3.2.2 UTRA FDD limits . 29g34.2.3.2.3 UTRA TDD limits . 30g34.2.3.2.4 Cumulative ACLR requir
13、ement in non-contiguous spectrum . 30g34.2.3.3 Conformance . 31g34.2.4 Transmitter spurious emissions . 31g34.2.4.1 Definition 31g34.2.4.2 Limits 32g34.2.4.2.1 Spurious emissions 32g34.2.4.2.2 Additional spurious emissions requirement for BC2 . 32g34.2.4.2.3 Co-existence with other systems . 32g34.2
14、.4.2.4 Protection of the BS receiver of own or different BS 34g34.2.4.3 Conformance . 34g34.2.5 Base station maximum output power 34g34.2.5.1 Definition 34g34.2.5.2 Limits 35g34.2.5.3 Conformance . 35g34.2.6 Transmit intermodulation . 35g34.2.6.1 Definition 35g34.2.6.2 Limits 35g34.2.6.2.1 General l
15、imits 35g34.2.6.2.2 Additional limits (BC1 and BC2) 36g34.2.6.2.3 Additional limits (BC3) . 36g34.2.6.3 Conformance . 37g34.2.7 Receiver spurious emissions . 37g3ETSI ETSI EN 301 908-18 V11.1.1 (2016-07) 4 4.2.7.1 Definition 37g34.2.7.2 Limits 37g34.2.7.2.1 General limits 37g34.2.7.2.2 Additional li
16、mits for BC2 38g34.2.7.3 Conformance . 38g34.2.8 In-band blocking . 38g34.2.8.1 Definition 38g34.2.8.2 Limits 38g34.2.8.2.1 General limits 38g34.2.8.2.2 Additional BC3 blocking limits . 40g34.2.8.3 Conformance . 40g34.2.9 Out-of-band blocking 40g34.2.9.1 Definition 40g34.2.9.2 Limits 40g34.2.9.3 Con
17、formance . 41g34.2.10 Receiver intermodulation characteristics 41g34.2.10.1 Definition 41g34.2.10.2 Limits 41g34.2.10.2.1 General intermodulation limits 41g34.2.10.2.2 General narrowband intermodulation limits 42g34.2.10.2.3 Additional narrowband intermodulation limits for GSM/EDGE . 44g34.2.10.3 Co
18、nformance . 44g34.2.11 Narrowband blocking . 44g34.2.11.1 Definition 44g34.2.11.2 Limits 44g34.2.11.2.1 General limits 44g34.2.11.2.2 Additional limits for GSM/EDGE . 45g34.2.11.2.3 GSM/EDGE limits for AM suppression 45g34.2.11.3 Conformance . 45g34.2.12 Reference sensitivity level 45g34.2.12.1 Defi
19、nition 45g34.2.12.2 Limits 45g34.2.12.3 Conformance . 46g35 Testing for compliance with technical requirements 46g35.1 Environmental conditions for testing . 46g35.2 Interpretation of the measurement results 46g35.3 Essential radio test suites 48g35.3.0 Introduction. 48g35.3.1 Operating band unwante
20、d emissions 48g35.3.1.0 General 48g35.3.1.1 Initial conditions . 48g35.3.1.2 Procedure 49g35.3.1.3 Test requirement . 49g35.3.2 Adjacent Channel Leakage power Ratio (ACLR) 49g35.3.2.0 General 49g35.3.2.1 Initial conditions . 49g35.3.2.2 Procedure 50g35.3.2.3 Test requirement . 50g35.3.3 Transmitter
21、spurious emissions . 50g35.3.3.1 Initial conditions . 50g35.3.3.2 Procedure 50g35.3.3.3 Test requirement . 51g35.3.4 Base station maximum output power 51g35.3.4.1 Initial conditions . 51g35.3.4.2 Procedure 51g35.3.4.3 Test requirement . 51g35.3.5 Transmit intermodulation . 51g35.3.5.0 General 51g35.
22、3.5.1 Initial conditions . 52g35.3.5.2 Procedure 52g35.3.5.2.1 General minimum requirement test procedure 52g3ETSI ETSI EN 301 908-18 V11.1.1 (2016-07) 5 5.3.5.2.2 Additional minimum requirement (BC1 and BC2) test procedure 53g35.3.5.2.3 Additional minimum requirement (BC3) test procedure . 54g35.3.
23、5.3 Test requirement . 54g35.3.6 Receiver spurious emissions . 54g35.3.6.1 Initial conditions . 54g35.3.6.2 Procedure 55g35.3.6.3 Test requirement . 55g35.3.7 In-band blocking . 55g35.3.7.1 Initial conditions . 55g35.3.7.2 Procedure 55g35.3.7.2.1 Procedure for general blocking 55g35.3.7.2.2 Procedur
24、e for additional BC3 blocking requirement . 56g35.3.7.3 Test requirement . 56g35.3.8 Out-of-band blocking 56g35.3.8.1 Initial conditions . 56g35.3.8.2 Procedure 57g35.3.8.3 Test requirement . 57g35.3.9 Receiver intermodulation characteristics 57g35.3.9.1 Initial conditions . 57g35.3.9.2 Procedure 58
25、g35.3.9.2.1 Procedure for general and narrowband intermodulation . 58g35.3.9.2.2 Procedure for additional narrowband intermodulation for GSM/EDGE . 58g35.3.9.3 Test requirement . 58g35.3.10 Narrowband blocking . 58g35.3.10.1 Initial conditions . 58g35.3.10.2 Procedure 59g35.3.10.2.1 Procedure for na
26、rrowband blocking 59g35.3.10.2.2 Procedure for additional narrowband blocking for GSM/EDGE . 59g35.3.10.2.3 Procedure for GSM/EDGE AM suppression . 59g35.3.10.3 Test requirement . 59g35.3.11 Reference sensitivity level 60g35.3.11.1 General 60g35.3.11.2 Test requirement . 60g3Annex A (normative): Rel
27、ationship between the present document and the essential requirements of Directive 2014/53/EU . 61g3Annex B (normative): Base Station configurations . 62g3B.1 Reception with multiple receiver antenna connectors and receiver diversity 62g3B.2 Duplexers . 62g3B.3 Power supply options . 62g3B.4 Ancilla
28、ry RF amplifiers 62g3B.5 BS using antenna arrays . 63g3B.5.0 General . 63g3B.5.1 Receiver tests 63g3B.5.2 Transmitter tests . 64g3B.6 Transmission with multiple transmitter antenna connectors 64g3B.7 BS with integrated Iuant BS modem 64g3Annex C (informative): Environmental profile specification . 6
29、5g3Annex D (informative): Bibliography . 66g3History 67g3ETSI ETSI EN 301 908-18 V11.1.1 (2016-07) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly av
30、ailable for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web se
31、rver (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may bec
32、ome, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Mobile Standards Group (MSG). For non EU countries the present document may be used for regulatory (Type Approval) purposes. The present document has been prepared un
33、der the Commissions standardisation request C(2015) 5376 final i.6 to provide one voluntary means of conforming to the essential requirements of Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing
34、Directive 1999/5/EC i.1. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of the present document given in table A-1 confers, within the limits of the scope of the present document, a presumption of conformit
35、y with the corresponding essential requirements of that Directive and associated EFTA regulations. The present document is part 18 of a multi-part deliverable. Full details of the entire series can be found in part 1 i.4. National transposition dates Date of adoption of this EN: 12 July 2016 Date of
36、 latest announcement of this EN (doa): 31 October 2016 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 30 April 2017 Date of withdrawal of any conflicting National Standard (dow): 30 April 2018 Modal verbs terminology In the present document “shall“, “shall not
37、“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct cita
38、tion. Introduction The present document is part of a set of standards developed by ETSI that are designed to fit in a modular structure to cover radio equipment within the scope of the Radio Equipment Directive i.1. The present document is produced following the guidance in ETSI EG 203 336 i.2 as ap
39、plicable. ETSI ETSI EN 301 908-18 V11.1.1 (2016-07) 7 1 Scope The present document applies to the following equipment types: 1) Multi-Standard Radio capable Base stations (E-UTRA, UTRA, GSM/EDGE). These radio equipment types are capable of operating in all or any part of the frequency bands given in
40、 table 1-1. Table 1-1: Base station operating bands Band designation and Band Category Direction of transmission MSR Base Station operating bands 1 (BC1) Transmit 2 110 MHz to 2 170 MHz Receive 1 920 MHz to 1 980 MHz 3 (BC2) Transmit 1 805 MHz to 1 880 MHz Receive 1 710 MHz to 1 785 MHz 7 (BC1) Tran
41、smit 2 620 MHz to 2 690 MHz Receive 2 500 MHz to 2 570 MHz 8 (BC2) Transmit 925 MHz to 960 MHz Receive 880 MHz to 915 MHz 20 (BC1) Transmit 791 MHz to 821 MHz Receive 832 MHz to 862 MHz 22 (BC1) Transmit 3 510 MHz to 3 590 MHz Receive 3 410 MHz to 3 490 MHz 28 (BC1) Transmit 758 MHz to 803 MHz Recei
42、ve 703 MHz to 748 MHz 32 (BC1) (note) Transmit 1 452 MHz to 1 496 MHz Receive N/A 33 (BC3) Transmit and Receive 1 900 MHz to 1 920 MHz 34 (BC3) Transmit and Receive 2 010 MHz to 2 025 MHz 38 (BC3) Transmit and Receive 2 570 MHz to 2 620 MHz 40 (BC3) Transmit and Receive 2 300 MHz to 2 400 MHz 42 (BC
43、3) Transmit and Receive 3 400 MHz to 3 600 MHz 43 (BC3) Transmit and Receive 3 600 MHz to 3 800 MHz NOTE: Restricted to E-UTRA operation when carrier aggregation is configured. The downlink operating band is paired with the uplink operating band (external) of the carrier aggregation configuration th
44、at is supporting the configured Pcell. Restricted to UTRA operation when dual band is configured (e.g. DB-DC-HSDPA or dual band 4C-HSDPA). The down link frequency(ies) of this band are paired with the uplink frequency(ies) of the other FDD band (external) of the dual band configuration. NOTE: For BS
45、 capable of multi-band operation, the supported operating bands may belong to different Band Categories. The present document covers requirements for multi-RAT capable E-UTRA, UTRA and GSM/EDGE MSR Base Stations for 3GPP Release 9, 10 and 11. This includes the requirements for E UTRA Base Station op
46、erating bands and E-UTRA CA operating bands from 3GPP Release 12. The present document contains requirements to demonstrate that Radio equipment both effectively uses and supports the efficient use of radio spectrum in order to avoid harmful interference. 2 References 2.1 Normative references Refere
47、nces are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. ETSI ETSI EN 3
48、01 908-18 V11.1.1 (2016-07) 8 Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term
49、validity. The following referenced documents are necessary for the application of the present document. 1 ETSI TS 137 141 (V11.13.0) (01-2016): “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; E-UTRA, UTRA and GSM/EDGE; Multi-Standard Radio (MSR) Base Station (BS) conformance testing (3GPP TS 37.141 version 11.13.0 Release 11)“. 2 ETSI TS 125 104 (V11.12.0) (01-2016): “Universal Mobile Telecommunications System (UMTS); Base Station (BS) radio transmission and reception (FDD) (3GPP TS 25.104 version
