1、 ETSI EN 301 908-3 V11.1.3 (2017-04) IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of Directive 2014/53/EU; Part 3: CDMA Direct Spread (UTRA FDD) Base Stations (BS) HARMONISED EUROPEAN STANDARD ETSI ETSI EN 301 908-3 V11.1.3 (2017-04)2 Reference REN/MS
2、G-TFES-11a-3-RED-C1 Keywords 3G, 3GPP, cellular, digital, E-UTRA, IMT, IMT-2000, IMT-Advanced, mobile, radio, regulation, UMTS, UTRA, WCDMA ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Associa
3、tion but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print
4、versions of the present document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a
5、 specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If
6、you find errors in the present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and m
7、icrofilm except as authorized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2017. All righ
8、ts reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and o
9、wned by the GSM Association. ETSI ETSI EN 301 908-3 V11.1.3 (2017-04)3 Contents Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g3Introduction 6g31 Scope 7g32 References 7g32.1 Normative references . 7g32.2 Informative references 8g33 Definitions, symbols and abbreviations . 9
10、g33.1 Definitions 9g33.2 Symbols 11g33.3 Abbreviations . 12g34 Technical requirements specifications . 13g34.1 Environmental profile . 13g34.2 Conformance requirements 13g34.2.1 Introduction. 13g34.2.2 Spectrum emissions mask . 16g34.2.2.1 Definition 16g34.2.2.2 Limit 17g34.2.2.3 Conformance . 24g34
11、.2.3 Adjacent channel leakage power ratio (ACLR) 24g34.2.3.1 Definition 24g34.2.3.2 Limits 24g34.2.3.3 Cumulative ACLR test requirement in non-contiguous spectrum or multiple-bands . 25g34.2.3.4 Conformance . 26g34.2.4 Transmitter spurious emissions . 26g34.2.4.1 Definition 26g34.2.4.2 Limits 27g34.
12、2.4.2.1 Spurious emissions 27g34.2.4.2.2 Co-existence with other systems . 27g34.2.4.2.3 Co-existence with services in adjacent frequency bands . 29g34.2.4.2.4 Protection of the BS receiver of own or different BS 29g34.2.4.2.5 Co-existence with Home BS operating in other bands 30g34.2.4.3 Conformanc
13、e . 30g34.2.5 Base Station maximum output power . 30g34.2.5.1 Definition 30g34.2.5.2 Limit 31g34.2.5.3 Conformance . 31g34.2.6 Transmitter intermodulation . 31g34.2.6.1 Definition 31g34.2.6.2 Limit 32g34.2.6.3 Conformance . 32g34.2.7 Receiver spurious emissions . 32g34.2.7.1 Definition 32g34.2.7.2 L
14、imit 32g34.2.7.3 Conformance . 33g34.2.8 Blocking characteristics 33g34.2.8.1 Definition 33g34.2.8.2 Limit 33g34.2.8.3 Conformance . 37g34.2.9 Receiver intermodulation characteristics 37g3ETSI ETSI EN 301 908-3 V11.1.3 (2017-04)4 4.2.9.1 Definition 37g34.2.9.2 Limit 38g34.2.9.3 Conformance . 39g34.2
15、.10 Receiver adjacent channel selectivity . 39g34.2.10.1 Definition 39g34.2.10.2 Limit 39g34.2.10.3 Conformance . 40g34.2.11 Home BS output power for adjacent channel protection 40g34.2.11.1 Definition 40g34.2.11.2 Limit 40g34.2.11.3 Conformance . 41g34.2.12 Reference sensitivity level 41g34.2.12.1
16、Definition 41g34.2.12.2 Limit 41g34.2.12.3 Conformance . 41g35 Testing for compliance with technical requirements 42g35.1 Environmental conditions for testing . 42g35.2 Interpretation of the measurement results 42g35.3 Essential radio test suites 44g35.3.0 Introduction. 44g35.3.1 Spectrum emission m
17、ask 44g35.3.1.0 General 44g35.3.1.1 Initial conditions . 44g35.3.1.2 Procedures . 45g35.3.1.3 Test requirement . 45g35.3.2 Adjacent channel leakage power ratio (ACLR) 45g35.3.2.1 Initial conditions . 45g35.3.2.2 Procedure 45g35.3.2.3 Test requirement . 46g35.3.3 Transmitter spurious emissions . 46g3
18、5.3.3.0 General 46g35.3.3.1 Initial conditions . 46g35.3.3.2 Procedure 46g35.3.3.3 Test requirement . 47g35.3.4 Base Station maximum output power . 47g35.3.4.0 General 47g35.3.4.1 Initial conditions . 47g35.3.4.2 Procedure 47g35.3.4.3 Test requirement . 48g35.3.5 Transmit intermodulation . 48g35.3.5
19、.0 General 48g35.3.5.1 Initial conditions . 48g35.3.5.2 Procedures . 48g35.3.5.3 Test requirement . 49g35.3.6 Receiver spurious emissions . 49g35.3.6.0 General 49g35.3.6.1 Initial conditions . 49g35.3.6.2 Procedure 49g35.3.6.3 Test requirement . 50g35.3.7 Blocking characteristics 50g35.3.7.0 General
20、 50g35.3.7.1 Initial conditions . 50g35.3.7.2 Procedure 51g35.3.7.3 Test requirement . 51g35.3.8 Receiver intermodulation characteristics 51g35.3.8.0 General 51g35.3.8.1 Initial conditions . 51g35.3.8.2 Procedures . 52g35.3.8.3 Test requirement . 52g35.3.9 Receiver adjacent channel selectivity (ACS)
21、 52g35.3.9.0 General 52g3ETSI ETSI EN 301 908-3 V11.1.3 (2017-04)5 5.3.9.1 Initial conditions . 52g35.3.9.2 Procedure 53g35.3.9.3 Test requirement . 53g35.3.10 Home BS output power for adjacent channel protection 53g35.3.10.1 Initial conditions . 53g35.3.10.2 Procedure 53g35.3.10.3 Test requirement
22、. 54g35.3.11 Reference sensitivity level 54g35.3.11.0 General 54g35.3.11.1 Initial Conditions . 54g35.3.11.2 Procedure 54g35.3.11.3 Test requirement . 55g3Annex A (informative): Relationship between the present document and the essential requirements of Directive 2014/53/EU . 56g3Annex B (normative)
23、: Base Station configurations . 57g3B.1 Receiver diversity . 57g3B.2 Duplexers . 57g3B.3 Power supply options . 57g3B.4 Ancillary RF amplifiers 58g3B.5 BS using antenna arrays . 58g3B.5.0 Introduction 58g3B.5.1 Receiver tests 59g3B.5.2 Transmitter tests . 59g3B.6 Transmit diversity and MIMO transmis
24、sion 59g3B.7 BS with integrated Iuant BS modem 60g3Annex C (informative): Environmental profile specification . 61g3Annex D (informative): Bibliography . 62g3Annex E (informative): Change history . 63g3History 64g3ETSI ETSI EN 301 908-3 V11.1.3 (2017-04)6 Intellectual Property Rights IPRs essential
25、or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Es
26、sential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarante
27、e can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Harmonised European Standard (EN) has been produced by ETSI Technical Committee Mobile Stan
28、dards Group (MSG). For non EU countries the present document may be used for regulatory (Type Approval) purposes. The present document has been prepared under the Commissions standardisation request C(2015) 5376 final i.1 to provide one voluntary means of conforming to the essential requirements of
29、Directive 2014/53/EU on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC i.2. Once the present document is cited in the Official Journal of the European Union under that Directive, compliance with t
30、he normative clauses of the present document given in table A-1 confers, within the limits of the scope of the present document, a presumption of conformity with the corresponding essential requirements of that Directive, and associated EFTA regulations. The present document is part 3 of a multi-par
31、t deliverable. Full details of the entire series can be found in part 1 i.5. National transposition dates Date of latest announcement of this EN (doa): 31 July 2017 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 January 2017 Date of withdrawal of any confli
32、cting National Standard (dow): 31 January 2018 Modal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the exp
33、ression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct citation. Introduction The present document is part of a set of standards developed by ETSI that are designed to fit in a modular structure to cover radio equipment within the scope of the R
34、adio Equipment Directive i.2. The present document is produced following the guidance in ETSI EG 203 336 i.3 as applicable. ETSI ETSI EN 301 908-3 V11.1.3 (2017-04)7 1 Scope The present document applies to the following equipment types: 1) Stations for IMT 2000 CDMA Direct Spread (UTRA FDD). This ra
35、dio equipment type is capable of operating in all or any part of the frequency bands given in table 1-1. Table 1-1: UTRA FDD Base Station operating bands UTRA FDD band Direction of transmission UTRA FDD Base Station operating bands I Transmit 2 110 MHz to 2 170 MHz Receive 1 920 MHz to 1 980 MHz III
36、 Transmit 1 805 MHz to 1 880 MHz Receive 1 710 MHz to 1 785 MHz VII Transmit 2 620 MHz to 2 690 MHz Receive 2 500 MHz to 2 570 MHz VIII Transmit 925 MHz to 960 MHz Receive 880 MHz to 915 MHz XV Transmit 2 600 MHz to 2 620 MHz Receive 1 900 MHz to 1 920 MHz XVI Transmit 2 585 MHz to 2 600 MHz Receive
37、 2 010 MHz to 2 025 MHz XX Transmit 791 MHz to 821 MHz Receive 832 MHz to 862 MHz XXII Transmit 3 510 MHz to 3 590 MHz Receive 3 410 MHz to 3 490 MHz XXXII (note 1) (note 2) Transmit 1 452 MHz to 1 496 MHz Receive - NOTE 1: The down link frequenc(ies) of this band are paired with the uplink frequenc
38、(ies) of the other FDD band (external) of the dual band configuration. NOTE 2: Radio equipment in band XXXII is only allowed to operate between 1 452 MHz and 1 492 MHz. The present document covers requirements for UTRA FDD Base Stations for 3GPP Releases 99, 4, 5, 6, 7, 8, 9, 10 and 11. This include
39、s the requirements for BS operating bands from 3GPP Release 12. In addition, the present document covers requirements for UTRA FDD Base Stations in the operating bands specified in ETSI TS 102 735 i.4. The present document covers the essential requirements of article 3.2 of Directive 2014/53/EU i.2
40、under the conditions identified in annex A. 2 References 2.1 Normative references References are specific, identified by date of publication and/or edition number or version number. Only the cited version applies. Referenced documents which are not found to be publicly available in the expected loca
41、tion might be found at https:/docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI TS
42、125 141 (V11.12.0) (01-2016): “Universal Mobile Telecommunications System (UMTS); Base Station (BS) conformance testing (FDD) (3GPP TS 25.141 version 11.12.0 Release 11)“. ETSI ETSI EN 301 908-3 V11.1.3 (2017-04)8 2 ETSI TS 145 004 (V11.0.0) (10-2012): “Digital cellular telecommunications system (Ph
43、ase 2+); Modulation (3GPP TS 45.004 version 11.0.0 Release 11)“. 3 ETSI TS 125 104 (V11.12.0) (01-2016): “Universal Mobile Telecommunications System (UMTS); Base Station (BS) radio transmission and reception (FDD) (3GPP TS 25.104 version 11.12.0 Release 11)“. 4 ETSI EN 301 908-18 (V11.1.2) (04-2017)
44、: “IMT cellular networks; Harmonised Standard covering the essential requirements of article 3.2 of the Directive 2014/53/EU; Part 18: E-UTRA, UTRA and GSM/EDGE Multi-Standard Radio (MSR) Base Station (BS)“. 2.2 Informative references References are either specific (identified by date of publication
45、 and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time
46、 of publication, ETSI cannot guarantee their long term validity. The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 Commission implementing decision C(2015) 5376 final of 4.8.2015 on
47、a standardisation request to the European Committee for Electrotechnical Standardisation and to the European Telecommunications Standards Institute as regards radio equipment in support of Directive 2014/53/EU of the European Parliament and of the Council. i.2 Directive 2014/53/EU of the European pa
48、rliament and of the council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC. i.3 ETSI EG 203 336 (V1.1.1) (08-2015): “Electromagnetic compatibility and Radio spectrum Matters (E
49、RM); Guide for the selection of technical parameters for the production of Harmonised Standards covering article 3.1(b) and article 3.2 of Directive 2014/53/EU“. i.4 ETSI TS 102 735 (V7.1.0): “Universal Mobile Telecommunications System (UMTS); Band-specific requirements for UMTS Frequency Division Duplex (FDD) operation in the bands 1 900 MHz to 1 920 MHz paired with 2 600 MHz to 2 620 MHz and 2 010 MHz to 2 025 MHz paired with 2 585 MHz to 2 600 MHz“. i.5 ETSI EN 301 908-1 (V11.1.1): “IMT cellular networks; Harmonised Standard covering the es
