1、 ETSI EN 301 922 V1.1.1 (2003-06)European Standard (Telecommunications series) Private Integrated Services Network (PISN);Specification, functional model and information flows;Call identification and call linkage additional network featuresISO/IEC 21888 (2001) modifiedETSI ETSI EN 301 922 V1.1.1 (20
2、03-06) 2 Reference DEN/ECMA-00202 Keywords ANF, endorsement, PISN, stage 1, stage 2, supplementary service ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre
3、la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents bet
4、ween such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may b
5、e subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced e
6、xcept as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIP
7、HONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI EN 301 922 V1.1.1 (2003-06) 3 Intellectual Property Rights IPRs esse
8、ntial or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentia
9、lly Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out
10、by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This European Standard (Telecommunications series) has been produced by ECMA
11、 on behalf of its members and those of the European Telecommunications Standards Institute (ETSI). The present document is one of a series of standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISN). The series uses the Integrated Services Digita
12、l Network (ISDN) concepts as developed by ITU-T and conforms to the framework of standards for Open Systems Interconnection (OSI) as defined by ISO/IEC. The present document specifies the Call Identification and Call Linkage additional network feature. The present document endorses an International
13、Standard, ISO/IEC 21888. National transposition dates Date of adoption of this EN: 13 June 2003 Date of latest announcement of this EN (doa): 30 September 2003 Date of latest publication of new National Standard or endorsement of this EN (dop/e): 31 March 2004 Date of withdrawal of any conflicting N
14、ational Standard (dow): 31 March 2004 Endorsement notice The elements of International Standard ISO/IEC 21888 (2001) apply, with the following modifications. ETSI ETSI EN 301 922 V1.1.1 (2003-06) 4 Clause 3 Replace the first paragraph by: The following documents contain provisions which, through ref
15、erence in this text, constitute provisions of the present document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest versio
16、n applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. Insert the following normative references at the end of clause 3: 23 ETSI EN 300 189: “Private Integrated Services Network (PISN); Addressing ISO/I
17、EC 11571 (1998), modified“. 24 ETSI EN 300 171: “Private Integrated Services Network (PISN); Service description, functional capabilities and information flows; Circuit-mode 64 kbit/s bearer services ISO/IEC 11574 (2000) modified“. 25 ETSI ETS 300 475-1: “Private Telecommunication Network (PTN); Ref
18、erence configuration; Part 1: Reference configuration for PTN eXchanges (PTNXs) ISO/IEC 11579-1 (1994), modified“. 26 ETSI EN 300 258: “Private Integrated Services Network (PISN); Specification, functional model and information flows; Path replacement additional network feature ISO/IEC 13863 (1998)
19、modified“. 27 ETSI ETS 300 260: “Private Integrated Services Network (PISN); Specification, functional models and information flows; Call transfer supplementary service“. 28 ETSI EN 300 365: “Private Integrated Services Network (PISN); Specification, functional model and information flows; Call comp
20、letion supplementary services ISO/IEC 13866 (1995) modified“. 29 ETSI ETS 300 256: “Private Integrated Services Network (PISN); Specification, functional models and information flows; Diversion supplementary services“. 30 ETSI EN 300 361: “Private Integrated Services Network (PISN); Specification, f
21、unctional model and information flows; Call offer supplementary service ISO/IEC 14841 (1996) modified“. 31 ETSI EN 300 363: “Private Integrated Services Network (PISN); Specification, functional model and information flows; Do not disturb and do not disturb override supplementary services ISO/IEC 14
22、842 (1996) modified“. 32 ETSI EN 300 425: “Private Integrated Services Network (PISN); Specification, functional model and information flows; Call intrusion supplementary service ISO/IEC 14845 (1996) modified“. 33 ETSI EN 301 256: “Private Integrated Services Network (PISN); Specification, functiona
23、l models and information flows; Call interception additional network feature ISO/IEC 15053 (1997), modified“. 34 ETSI EN 301 824: “Private Integrated Services Network (PISN); Specification, functional model and information flows; Wireless terminal location registration supplementary service and wire
24、less terminal information exchange additional network feature ISO/IEC 15428 (1999) modified“. 35 ETSI EN 301 826: “Private Integrated Services Network (PISN); Specification, functional model and information flows; Wireless terminal call handling additional network features ISO/IEC 15430 (1999) modif
25、ied“. ETSI ETSI EN 301 922 V1.1.1 (2003-06) 5 36 ETSI EN 301 828: “Private Integrated Services Network (PISN); Specification, functional model and information flows; Wireless terminal authentication supplementary services ISO/IEC 15432 (1999) modified“. 37 ETSI EN 301 822: “Private Integrated Servic
26、es Network (PISN); Specification, functional models and information flows; Private User Mobility (PUM); Registration supplementary service ISO/IEC 17875 (2000), modified“. 38 ETSI EN 301 657: “Private Integrated Services Network (PISN); Specification, functional model and information flows; Private
27、User Mobility (PUM); Call handling Additional Network Features (ANFs) ISO/IEC 17877 (2000) modified“. 39 ETSI EN 301 918: “Private Integrated Services Network (PISN); Specification, functional model and information flows; Single step call transfer supplementary service ISO/IEC 19459 (2001) modified“
28、 Throughout the text of ISO/IEC 21888 Replace references as shown in the table below. Reference in ISO/IEC 21888 Modified reference ISO/IEC 11571 EN 300 189 23 ISO/IEC 11574 EN 300 171 24 ISO/IEC 11579-1 ETS 300 475-1 25 ISO/IEC 13863 EN 300 258 26 ISO/IEC 13865 ETS 300 260 27 ISO/IEC 13866 EN 300
29、365 28 ISO/IEC 13872 ETS 300 256 29 ISO/IEC 14841 EN 300 361 30 ISO/IEC 14842 EN 300 363 31 ISO/IEC 14845 EN 300 425 32 ISO/IEC 15053 EN 301 256 33 ISO/IEC 15428 EN 301 824 34 ISO/IEC 15430 EN 301 826 35 ISO/IEC 15432 EN 301 828 36 ISO/IEC 17875 EN 301 822 37 ISO/IEC 17877 EN 301 657 38 ISO/IEC 19459 EN 301 918 39 Replace the terms “this International Standard“ by “the present document“. ETSI ETSI EN 301 922 V1.1.1 (2003-06) 6 History Document history V1.1.1 February 2003 One-step Approval Procedure OAP 20030613: 2003-02-12 to 2003-06-13 V1.1.1 June 2003 Publication
