ETSI ES 200 674-1-2012 Intelligent Transport Systems (ITS) Road Transport and Traffic Telematics (RTTT) Dedicated Short Range Communications (DSRC) Part 1 Technical characteristics.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

DIN 20378-1990 Drilling hammers taper gauges for tapered connections of drill rods and bits《打眼锤 钻杆和钻头圆锥连接用锥度量规》.pdf

DIN 20379-1-2011 Rock drilling - Part 1 Tapered bits for percussive flush drilling《凿岩机 第1部分 冲击湿式凿岩用的锥体钻头》.pdf

DIN 20379-2-2011 Rock drilling - Part 2 Bits with internal thread for percussive flush drilling《凿岩机 第2部分 冲击湿式凿岩机用的内螺纹钻头》.pdf

DIN 204-1996 Hand reamers for morse tapers《莫氏锥柄手铰刀》.pdf

DIN 20400-1990 Knuckle threads for the mining threads with large load-bearing depth《采矿用圆螺纹 大承载深度螺纹》.pdf

DIN 20401-2004 Buttress threads - 0 8 mm to 2 mm pitch - Dimensions《锯齿螺纹 0 8至2mm的螺距 尺寸》.pdf

DIN 20449-1988 Points and crossovers for rail haulage roads in mines standard types terminology《矿山轨道运输道路的站点和交叉点 标准类型，术语》.pdf

DIN 20450-1988 Simple underground track points 20 m radius 1 5 inclination geometric dimensions《简易的地下矿道交叉点 半径为20m，斜度为1 5 几何尺寸》.pdf

DIN 20452-1-1988 Simple points for underground tracks with loose heel switch 20 m radius 1 5 inclination 600 mm gauge compilation《半径为 20 米、斜度 1 5 、轨距 600 毫米的带后部非固定式开关的地铁轨道用简易道岔 第1.pdf