ETSI ETS 300 052-1994 Integrated Services Digital Network (ISDN) Multiple Subscriber Number (MSN) Supplementary Service Digital Subscriber Signalling System No One (DSS1) Protocol《_1.pdf

上传人:王申宇 文档编号:731911 上传时间:2019-01-08 格式:PDF 页数:19 大小:584.12KB
下载 相关 举报
ETSI ETS 300 052-1994 Integrated Services Digital Network (ISDN) Multiple Subscriber Number (MSN) Supplementary Service Digital Subscriber Signalling System No One (DSS1) Protocol《_1.pdf_第1页
第1页 / 共19页
ETSI ETS 300 052-1994 Integrated Services Digital Network (ISDN) Multiple Subscriber Number (MSN) Supplementary Service Digital Subscriber Signalling System No One (DSS1) Protocol《_1.pdf_第2页
第2页 / 共19页
ETSI ETS 300 052-1994 Integrated Services Digital Network (ISDN) Multiple Subscriber Number (MSN) Supplementary Service Digital Subscriber Signalling System No One (DSS1) Protocol《_1.pdf_第3页
第3页 / 共19页
ETSI ETS 300 052-1994 Integrated Services Digital Network (ISDN) Multiple Subscriber Number (MSN) Supplementary Service Digital Subscriber Signalling System No One (DSS1) Protocol《_1.pdf_第4页
第4页 / 共19页
ETSI ETS 300 052-1994 Integrated Services Digital Network (ISDN) Multiple Subscriber Number (MSN) Supplementary Service Digital Subscriber Signalling System No One (DSS1) Protocol《_1.pdf_第5页
第5页 / 共19页
点击查看更多>>
资源描述

1、_ m 3404583 0343633 840 m CORRIGENDUM ETS 300 052 April 1994 _ _- - - Source: ETSI TC-SPS Reference: T/S 46-33B UDC: 621.395 Key words: ISDN, supplementary service This corrigendum modifies the European Telecommunication Standard ETS 300 052 (1 991 1 Integrated Services Digital Network (ISDN); Multi

2、ple Subscriber Number (MSN) supplementary service Digital Subscriber Signalling System No. one (DSSI ) protocol 1 ETSI European Telecommunications Standards Institute ETSI Secretariat Postal address: 0692 1 Sophia Antipolis Cedex - FRANCE Office address: Route des Lucioles - Sophia Antipolis - Valbo

3、nne - FRANCE Tel.: + 33 92 94 42 O0 - Fax: + 33 93 65 47 16 0 European Telecommunications Standards Institute 1 994. All rights reserved. No part may be reproduced except as authorised by written permission. The copyright and the foregoing restriction on reproduction extend to all media in which the

4、 information may be embodied. Page 2 ETS 300 052: 1 99 1 /Corrigendum: 1994 Whilst every care has been taken in the preparation and publication of this document, errors in content, typographical or otherwise, may occur. If you have comments concerning its accuracy, please write to “ETSI Editing and

5、Standards Approval Dept.“ at the address shown on the title page. 3404583 0143635 bL3 = Page 3 ETS 300 052: 1991 ICorrigendum:l994 Foreword As a result of the development of conformance tests to this and other European Telecommunicatiori Standards (ETSs) by the Signalling Protocols and Switching (SP

6、SJ Technical Committee of the European Telecommunications Standards Institute (ETSIJ, it has become necessary to introduce additional parts to the concerned ETSs. Where additional parts to an ETS have been introduced, the base standards are now identified by the additional wording “Part 1: Protocol

7、specification“ in the title and the ETS .number is followed by “-1 “. (, The concerned ETSs cover the Digital Subscriber Signalling System No. one (DSSlJ protocol for Integrated Services Digital Network (ISDNI supplementary services. The general structure of these ETSs is described below: Part 1: Pr

8、otocol specification; Part 2: Protocol Implementation Conformance Statement (PICS) proforma; Part 3: Test Suite Structure and Test Purposes (TSS Part 4: Abstract Test Suite (ATSI and partial Protocol Implementation extra Information foi Testing (PIXIT) proforma for the user; Part 5: Test Suite Struc

9、ture and Test Purposes (TSS Part 6: Abstract Test Suite (ATS) and partial Protocol Implementation extra Information for Testing (PIXIT) proforma for the network; NOTE 1: For some DSS1 standards, parts 5 and 6 are not required and are therefore omitted. For the sake of conformity and alignment with t

10、he additional parts of ETS 300 052, this corrigendum changes the title page of ETS 300 052 to that shown on the unmarked page 5 of this corrigendum. NOTE 2: For convenience, page 5 of this corrigendum has no page number or header, and page 6 has been left blank. m 3404583 0343636 55T m k UN I CATI O

11、N STANDARD ETS 300 052-1 October 1991 Source: ETSI TC-SPS Reference: T/S 46-33B UDC: 621.395 Key words: ISDN, supplementary service Integrated Services Digital Network (ISDN); Multiple Subscriber Number (MSN) supplementary service Digital Subscriber Signalling System No. one (DSS 1 ) protocol Part 1

12、 : Protocol specification ETSI European Telecommunications Standards Institute ETSI Secretariat Postal address: 06921 Sophia Antipolis Cedex - FRANCE Office address: Route des Lucioles - Sophia Antipolis - Valbonne - FRANCE Tel.: +33 92 94 42 O0 - Fax: +33 93 65 47 16 European Telecommunications Sta

13、ndards Institute 1 991 . All rights reserved. No part may be reproduced except as authorised by written permission. The copyright and the foregoing restriction on reproduction extend to all media in which the information may be embodied. m History 3404583 0343637 496 W Page 7 ETS 300 052: 1991 /Corr

14、igendum:l994 Document history April 1994 Corrigendum to Edition 1 of ETS 300 052 I ETS 300 052 October 1991 UDC: 621.395 Key words: ISDN, supplementary service. Integrated Services Digital Network (ISDN); Multiple Subscriber Number (MSN) supplementary service Digital Subscriber Signalling System No.

15、 one (DSS 1 ) protocol ETSI European Telecommunications Standards Institute ETSI Secretariat: B.P.152 . F - 06561 Valbonne Cedex . France TP. + 33 92 94 42 00 TF. + 33 93 65 47 16 Tx. 47 00 40 F European Telecommunications Standards Institute 1991. All rights reserved. No part may be reproduced or u

16、sed except as authoristd by contract or other written permission. The copyright and the foregoing restriction on reproduction and use extend to all media in whii the information may be embodied. m 3404583 0143639 269 m Pago 2 ETSW 052:lBDl Whilst every care has been taken in the preparation and publ

17、ication of this document. errors in content, typographical or otherwisa, may occur. li you have comments concerning its accuracy, please write to “ETSI Standards Management Dept.“ at the address shown on the title page. W 3404583 OL43b40 TBO W Pago 3 ETS 300 052:1991 Contents Foreword . 5 o scope .

18、7 2 Normative references 7 3 Definitions 8 4 Symbols and abbreviaths . 9 5 escription 9 6 Operational requirements . 9 Provision and withdrawal 9 Requiremts on the originating network side 9 Requirements on the destination network side .9 Coding requirements ., 9 6.1 6.2 6.3 7 8 State definiuons 10

19、Signalling procedures at the coincident S and T reference point 10 Activation. deactivation and registratiori 10 Delivery of multiple subscriber number . 10 92.1 Normal operation 10 9.2.2 Exceptional procedures . 10 Receipt of multiple subscriber number 11 9.3.1 Normal operation 11 9.3.2 Exceptional

20、 procedures . 11 Procedures for interworking with private ISDNs . 11 Interactions with other networks . 11 9 9.1 9.2 9.3 10 11 12 13 14 Interactions with other supplementary 12 Parameter values (timers) . 12 Dynamic description (SMS) 12 Annex A (informative) 13 Signalling flows . 13 Annex B (informa

21、tive) 14 Terminal interchangeability between public and private ISDNs 14 Annex C (informative) . 15 Bibliography . 15 M 3404583 0143641 917 Pug. S ETS 300 OS21991 Foreword This European Telecommunication Standard (fTS) has been produced by the Signalling Protocols - Stage 2: identifies the functiona

22、l capabilities and information flows needed to support the sewice described in stage 1; and - Stage 3: defines the signalling system protocols and switching funcm needed to implement the service described in stage 1. This ETS details the stage 3 aspects (signalling system protocols and switching hrn

23、ctions) needed to support the Multiple Subscriber Number (MSN) supplementary sewb. The stage 1 and stage 2 aspects are detailed in ETS 300 O50 (1991) and ETS 300 o51 (1991). respectively. Previous page is blank Pega 7 ETS 300 0521991 1 Scope This standard specks the stage three of the Muttiple Subsc

24、riber Number (MSN) supplementary mice for the pan-European Integrated Sewices Digital Network (ISDN) as provided by European public telkations operators at the T reference point or coincident S and T reference point (as defined in CCm recommendation 1.411 i) by mans of the Digital Subscriber Signall

25、ing System No. one (DSS1). Stage three identifies the protocol procedures and switching functions needed to support a telecommwiications senrice (see CCnT Recommendation 1.130 (21). In addition, this standard specifies the protocol requirements at the T reference point where the service is provided

26、to the user via a private ISDN. This standard does not specify the additional protocol requirements where the service is provided to the 1961 via a telecommunications network that is not m ISDN. The MSN supplementary service provides the possibility for assigning multiple numbers to a single public

27、or private access. NOTE : This allows e.g.: 1) a calling UsBr to select, via the public network, one or multiple distinct terminals out of a multiple choice; 2) to identify the terminai to the network for the application of other supplementary seniices. It is considered: - that in the case of a basi

28、c uccass some servia providers mey not have knowledge or control over what is connected. e.g. a private ISDN or a terminal configuratiori; - that senfice providers have differing numbering methods. The MSN supplementary service is applicable to ail telecommunication services. Further standards specm

29、 the method of testing required to identify conformance to this standard. This standard is applicable to equipment, supporting the MSN supplementary sewice. to be attached at either side of a T reference point ar coincident S and T reference point when used as an access to the public ISDN. 2 Normati

30、ve references This ETS incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate placec in the text and the publications are licted hereafter. For dated references, subseqiient amendments to, or revisions of any of these p

31、ublications apply io this ETS only when incorporated in it by amendment w revSm. For undated references the latest ediU0n of the publication referred to applies. CCTTT lkammendation 1.411 (1388): “ISDN user-network inferfaces - Reference configurations“. CCTTT Recommendation 1.130 (1988): “Method fo

32、r the characterisation of telecommunication services suppwted by an ISDN and network capabilities of an ISDN“. Previous page is blank . . :. 3404583 0343643 7T M P8gO 8 ETS 300 052:1991 131 I61 m 181 191 3 Definltions CI ETS 300 102-1 (1990): “Integrated Senrices Digital Network (ISDN): Useraetwork

33、interfw layer 3; Specifications for basic call control“. ETS 500 195: “Integrated Services Digital Network (ISDN); Digital Subscriber Signalling System No. one (DSS1); Supplementary Service interactions protocol V/S 46-334“. ETS 500 102-2 (1990): “kitegmted Servi- Digital Network (ISDN): W-mtwork in

34、terface Iayer.3; Specifications for basic call control; Specification Description Language (SDL) diagrams. CCTTT Recommendation 1.112 (1988): “Vocabulary of terms for ISDNs“. CCTTT Recommendation El64 (1988): “Numbering plan for the ISDN mu. CCTTT Recommendation 1.210 (1988): “Principles of telecomm

35、unication fankas supported by an ISDN and the means to deecribe them“. DS 300 092 (1991): “Integrated Services Digital Network (ISDN); D$W Subscriber Signalling System No. one (DSS1) protocol. Calling Line Identification Presentation (UP) suppiementary SeMce; For the purposes of this standard, the f

36、ollowing definitions appty: Integrated S.ncor Dlgltd Nowork (ISDN): se8 CCCTT Recommendation 1.112 161, Q 2.3, definition 308. Notwork the DSS1 pr- entity at the network side of the user-mtwork interface. Usor: the DSS1 protocd entity at the user side of the usernetwork interface. S.rvlco; telocornm

37、unkJonr rorvice: 888 CClll Recommendation 1.112 161, 5 22, definition 201. Spoclal arrangement see ETS 300 092 191, Clause 3. Supplementary sorvlce: 888 CCn Recammendation 1.260 8. Q 2.4. ISDN number: A number conforming to the nunbering pian and stnicturs specified in CCM Recummendation E.164 m. In

38、tornmtlonai number: an ISDN number stnichrred as specified in 9 32 (in the paragraphs relating to internatid number) of CCiiT R-datim E164 m. Notional numbor; National slgnlflcant number: an ISDN number structured as specified in 9 32 (in the paragraphs relating to national significant number) of CC

39、m Recommendation E.164 m. 8ubmcrib.r numbor: an ISDN number structured as specified in 5 3.2 (in the paragraphs relating to subscriber number) of CCRT Recommendation E.164 m. Multiple 8ubscrlbor numbor: on ISDN number a6 part of o set of ISDN numbers assigned to a user which shall be dthw - he whole

40、 ISDN number; or i P8gO 9 ETS 300 052:lgQl - a part of the ISDN number (the etast significant nu digit(s) where “nm may be a number up to the full length of the ISDN number and shall bo a number large enough to allow ali terminais on an access to be assigned an individual number). NOTE: National or

41、International prefixes cannot form part of the muluple subscriber number 4 Symbols and abbreviations DDI Direct Dialling In DSSI Digital Subscriber Signahg System No. one ISDN Integrated Services Digital Network MSN Multiple Subscriber Number PSTN Public Switched Telephone Network 5 Description The

42、MSN supplementary service shall emable each individual temiinal on one access to have one or me identities, by which one individual terminal of a group of temiinals (e.g. at a passive bus configuration) CM be discriminated from the others. NOTE: CCm Recommendation E.164 m provides the flexibility to

43、 adminictrations to use national numbering plans of fmed or vatiable length. This flexibility also applies to mutuple subscriber numbers. 6 Operational requirements 6.1 Provlrlon and wlthdrawil The senrice shall be provided after prior arrangement with the senrice provider and shall be withdrawn on

44、the subscribers request or for adminlstnat*rn reasoris. The sewice provider shall allocate a proper set of ISDN numbers Midi stiall meet the averall needs of the access concerned. 6.2 Roquiromonb on tho originating nework sldo The basic call control procedures according to Eis 300 102-1 i31 subclaus

45、e 5.1 shall apply. If the access has the MSN supplementary SBNICB, th8 network may use (as a network option) ths information in the Calling party number infomisition element to identify the calling terminai. and, if necsssary, he appropriate basic or supplmtary semices. 6.3 Roquiromenb on tho dertin

46、atlon notwork Ado When hhe multiple subscriber number is provided to the called user, the network shall send at least the significant part of the called partys ISDN number to the user en-bloc in the SW message according b ETS 300 102-1 131 subciause 5.2. ? Coding requirements The multiple subscriber

47、 number of the called LLsBT shall be inserted in the Called pm number Information element as specified in ETS 300 102-1 3 subclause 45. Pmg. 10 ETS 300 0521991 r lhe multiple subscriber number of the calling user shall be inserted in the calling party number information element as sgecified in E 300

48、 102-1 3 subclause 46.10. 8 State definitions The states associated with basic call wntrol according to ETS 300 102-1 3 shall apply. 9 Signalling procedures at the coincident S and 7 reference point 9.1 Activation, deachtatlon 8nd rogIsatlon Not applicable. 9.2 Delivery of multiple subscriber number

49、 9.2.1 Normal oporatlon The multiple subscriber number shall be delkefed from the network to ie user according to the procedures of ETS 300 102-1 (31 subclause 5.2. The type of number indicated in the Called pariy number information element sent to the user shall be coded as: - “unknown. where the number sent is not a full ISDN number (including at least the multiple subscriber number). National Md intemational prefiies shall not be included: - “subscri - “subscriber number“, national number“ or “intemational number

展开阅读全文
相关资源
猜你喜欢
  • EN 50109-2-3-1995 en Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and Radio Frequency Applications Part 2-3 Particular Require.pdf EN 50109-2-3-1995 en Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and Radio Frequency Applications Part 2-3 Particular Require.pdf
  • EN 50109-2-4-1995 en Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and Radio Frequency Applications Part 2-4 Particular Require.pdf EN 50109-2-4-1995 en Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and Radio Frequency Applications Part 2-4 Particular Require.pdf
  • EN 50109-2-5-1995 en Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and Radio Frequency Applications Part 2-5 Particular Require.pdf EN 50109-2-5-1995 en Hand Crimping Tools Tools for the Crimp Termination of Electric Cables and Wires for Low Frequency and Radio Frequency Applications Part 2-5 Particular Require.pdf
  • EN 50110-1-2013 en Operation of electrical installations - Part 1 General requirements.pdf EN 50110-1-2013 en Operation of electrical installations - Part 1 General requirements.pdf
  • EN 50110-2-2010 en Operation of electrical installations - Part 2 National annexes《电气设备的操作 第2部分 国家标准附件》.pdf EN 50110-2-2010 en Operation of electrical installations - Part 2 National annexes《电气设备的操作 第2部分 国家标准附件》.pdf
  • EN 50117-1-2002 en Coaxial Cables Part 1 Generic Specification (Incorporates Amendment A2 2013)《同轴电缆 第1部分 通用规范 包含修改件A1-2006》.pdf EN 50117-1-2002 en Coaxial Cables Part 1 Generic Specification (Incorporates Amendment A2 2013)《同轴电缆 第1部分 通用规范 包含修改件A1-2006》.pdf
  • EN 50117-2-1-2005 en Coaxial cables Part 2-1 Sectional specification for cables used in cabled distribution networks C Indoor drop cables for systems operating at 5 MHz - 1 000 MHz.pdf EN 50117-2-1-2005 en Coaxial cables Part 2-1 Sectional specification for cables used in cabled distribution networks C Indoor drop cables for systems operating at 5 MHz - 1 000 MHz.pdf
  • EN 50117-2-2-2004 en Coaxial cables Part 2-2 Sectional specification for cables used in cabled distribution networks C Outdoor drop cables for systems operating at 5 MHz - 1000 MHz.pdf EN 50117-2-2-2004 en Coaxial cables Part 2-2 Sectional specification for cables used in cabled distribution networks C Outdoor drop cables for systems operating at 5 MHz - 1000 MHz.pdf
  • EN 50117-2-3-2004 en Coaxial cables Part 2-3 Sectional specification for cables used in cabled distribution networks C Distribution and trunk cables for systems operating at 5 MHz .pdf EN 50117-2-3-2004 en Coaxial cables Part 2-3 Sectional specification for cables used in cabled distribution networks C Distribution and trunk cables for systems operating at 5 MHz .pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1