ETSI PRETS 300 019-A-1990 Equipment Engineering Environmental Conditions and Environmental Tests for Telecommunications Equipment Part A - Introduction and Terminology《设备工程 电信设备的环境.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM C957-2006 Standard Specification for High-Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface《带整体磨损面的高固体含量并使用冷却液的弹性防水薄膜的标准规范》.pdf

ASTM C958-1992(2007) Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation《用重力沉积的X射线监测器测定矾土或石英的粒度分布的试验方法》.pdf

ASTM C958-1992(2014) Standard Test Method for Particle Size Distribution of Alumina or Quartz by X-Ray Monitoring of Gravity Sedimentation《用重力沉积的X射线监测器测定矾土或石英粒度分布的标准试验方法》.pdf

ASTM C960 C960M-2001 Standard Specification for Predecorated Gypsum Board.pdf

ASTM C961-2006 Standard Test Method for Lap Shear Strength of Sealants《密封材料的搭接剪切强度的标准试验方法》.pdf

ASTM C961-2006(2011) Standard Test Method for Lap Shear Strength of Sealants《密封材料的搭接剪切强度的标准试验方法》.pdf

ASTM C961-2015 Standard Test Method for Lap Shear Strength of Sealants《密封材料的搭接剪切强度的标准试验方法》.pdf

ASTM C963-2000(2007) Standard Specification for Packaging Identification Shipment and Storage of Lock-Strip Gaskets《锁条衬垫的包装、识别、交货及储存标准规范》.pdf

ASTM C963-2000(2012) Standard Specification for Packaging Identification Shipment and Storage of Lock-Strip Gaskets《锁条衬垫的包装、识别、交货及储存的标准规范》.pdf