ETSI PRETS 300 478-1995 Network Aspects (NA) Connectionless Broadband Data Service (CBDS) over Asynchronous Transfer Mode (ATM) Framework and Protocol Specification at the User-Net.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D6383-1999(2005) Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material《由EPDM屋顶膜材料制造的胶粘剂接头的失效时间(蠕变破裂)的标准操作规程》.pdf

ASTM D6384-1999a(2005) Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants《润滑剂的生物降解性和生态毒性的相关标准术语》.pdf

ASTM D6384-2011 red 3750 Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants《润滑剂的生物降解性和生态毒性的相关标准术语》.pdf

ASTM D6384-2017 6281 Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants《润滑剂生物可降解性和生态毒性相关标准术语》.pdf

ASTM D6384-2018 8750 Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants.pdf

ASTM D6385-1999(2006) Standard Test Method for Determining Acid Extractable Content in Activated Carbon by Ashing《通过灰化对活性碳中酸可提取含量的标准试验方法》.pdf

ASTM D6385-1999(2011) 1250 Standard Test Method for Determining Acid Extractable Content in Activated Carbon by Ashing《通过灰化对活性碳中酸可提取含量的标准试验方法》.pdf

ASTM D6385-1999(2017) 7276 Standard Test Method for Determining Acid-Extractable Content in Activated Carbon by Ashing《灰化法测定活性炭中酸的可提取含量的试验方法》.pdf

ASTM D6386-1999(2005) Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting《锌(热浸镀的)涂覆的铁和钢产品和用于喷涂的五金制品表面准备的.pdf