ETSI PRI-ETS 300 045-1992 European Digital Cellular Telecommunications System (Phase 1) Subscriber Identity Module - Mobile Equipment (SIM-ME) Interface Specification《欧洲数字蜂窝通信系统(第1_1.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM D3260-2001(2011) Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products《适用于工厂的压制铝制品透明涂料的耐酸和耐灰浆标准试验方法》.pdf

ASTM D3260-2001(2017) Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products《工厂用压制铝制品透明涂料的耐酸性和耐灰浆性的标准试验方法》.pdf

ASTM D3261-2003 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing《聚乙烯(PE)塑料管用端面热熔接聚乙烯塑料配件标准规范》.pdf

ASTM D3261-2010 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing.pdf

ASTM D3261-2010a Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing《聚乙烯(PE)塑料管和管件用热熔接聚乙烯(PE)塑料配件标准规范》.pdf

ASTM D3261-2012 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing《聚乙烯(PE)塑料管和管件用热熔接聚乙烯(PE)塑料配件的标准规格》.pdf

ASTM D3261-2012e1 Standard Specification for Butt Heat Fusion Polyethylene &40 PE&41 Plastic Fittings for Polyethylene &40 PE&41 Plastic Pipe and Tubing《聚乙烯(PE)塑料管和管件用热熔接聚乙烯(PE)塑料配.pdf

ASTM D3261-2015 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing《聚乙烯 (PE) 塑料管和管道用对接热熔聚乙烯 (PE) 配件的标准规格》.pdf

ASTM D3261-2016 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing《聚乙烯(PE)塑料管材和管材用热熔热熔聚乙烯(PE)塑料配件的标准规格》.pdf