ETSI TR 102 741-2009 Broadband Radio Access Networks (BRAN) Test Report Template for testing to EN 301 893 V1 5 1 (R&TTE) (V1 1 1)《宽带无线接入网(BRAN)中对EN 301 893(版本1 5 1)(R&TTE)的测试的测试报告_1.pdf

上传人:Iclinic170 文档编号:736131 上传时间:2019-01-12 格式:PDF 页数:55 大小:292.91KB
下载 相关 举报
ETSI TR 102 741-2009 Broadband Radio Access Networks (BRAN) Test Report Template for testing to EN 301 893 V1 5 1 (R&TTE) (V1 1 1)《宽带无线接入网(BRAN)中对EN 301 893(版本1 5 1)(R&TTE)的测试的测试报告_1.pdf_第1页
第1页 / 共55页
ETSI TR 102 741-2009 Broadband Radio Access Networks (BRAN) Test Report Template for testing to EN 301 893 V1 5 1 (R&TTE) (V1 1 1)《宽带无线接入网(BRAN)中对EN 301 893(版本1 5 1)(R&TTE)的测试的测试报告_1.pdf_第2页
第2页 / 共55页
ETSI TR 102 741-2009 Broadband Radio Access Networks (BRAN) Test Report Template for testing to EN 301 893 V1 5 1 (R&TTE) (V1 1 1)《宽带无线接入网(BRAN)中对EN 301 893(版本1 5 1)(R&TTE)的测试的测试报告_1.pdf_第3页
第3页 / 共55页
ETSI TR 102 741-2009 Broadband Radio Access Networks (BRAN) Test Report Template for testing to EN 301 893 V1 5 1 (R&TTE) (V1 1 1)《宽带无线接入网(BRAN)中对EN 301 893(版本1 5 1)(R&TTE)的测试的测试报告_1.pdf_第4页
第4页 / 共55页
ETSI TR 102 741-2009 Broadband Radio Access Networks (BRAN) Test Report Template for testing to EN 301 893 V1 5 1 (R&TTE) (V1 1 1)《宽带无线接入网(BRAN)中对EN 301 893(版本1 5 1)(R&TTE)的测试的测试报告_1.pdf_第5页
第5页 / 共55页
点击查看更多>>
资源描述

1、 ETSI TR 102 741 V1.1.1 (2009-11)Technical Report Broadband Radio Access Networks (BRAN)Test Report Template for testing to EN 301 893 V1.5.1 (R Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are

2、available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI We

3、b server) which are, or may be, or may become, essential to the present document. Foreword This Technical Report (TR) has been produced by ETSI Technical Committee Broadband Radio Access Networks (BRAN). ETSI ETSI TR 102 741 V1.1.1 (2009-11) 61 Scope It is expected that the present document can be u

4、sed as a Test Report Template that would be useful for national conformity assessment bodies and market surveillance authorities in countries where the R - in countries where the R - in countries where the R - in countries where the R - for informative references. Referenced documents which are not

5、found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced docume

6、nts are indispensable for the application of the present document. For dated references, only the edition cited applies. For non-specific references, the latest edition of the referenced document (including any amendments) applies. Not applicable. ETSI ETSI TR 102 741 V1.1.1 (2009-11) 72.2 Informati

7、ve references The following referenced documents are not essential to the use of the present document but they assist the user with regard to a particular subject area. For non-specific references, the latest version of the referenced document (including any amendments) applies. i.1 Directive 1999/5

8、/EC of the European Parliament and of the Council of 9 March 1999 on radio equipment and telecommunications terminal equipment and the mutual recognition of their conformity (R 5 GHz high performance RLAN; Harmonized EN covering essential requirements of article 3.2 of the R 5 GHz high performance R

9、LAN; Harmonized EN covering essential requirements of article 3.2 of the R 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R Test Report Template for testing to EN 301 893 (V1.3.1) (R&TTE)“. 3 Definitions, symbols and abbreviations 3.1 Definitions

10、 For the purpose of the present document, the terms and definitions given in EN 301 893 i.4 and the following apply: submitter: manufacturer, company or person that is submitting a product to be tested against the harmonized standard EN 301 893 i.4 3.2 Symbols For the purposes of the present documen

11、t, the following symbols apply: dBi antenna gain in decibels relative to an isotropic antenna dBm dB relative to 1 milliwatt GHz GigaHertz Hz Hertz kHz kiloHertz MHz MegaHertz 3.3 Abbreviations For the purposes of the present document, the following abbreviations apply: AC Alternating Current CE Com

12、munaut Europenne (European Community) DC Direct Current EIRP Equivalent Isotropically Radiated Power ITU International Telecommunications Union NCB Nominal Channel Bandwidth OCB Occupied Channel Bandwidth R&TTE Radio and Telecommunications Terminal Equipment RF Radio Frequency ETSI ETSI TR 102 741 V

13、1.1.1 (2009-11) 8Tx Transmitter UUT Unit Under Test 4 Cover page and notes The title page should include the following title: “Test Report to EN 301 893 i.4 (V1.5.1)“. In addition, the title page should contain the following information: 1) Name of the laboratory performing the test. 2) Test report

14、reference number and revision number if applicable. 3) The name of the manufacturer. 4) The name of the submitter (if different from the manufacturer). 5) Equipment identification, including brand name, model number, etc. 6) Test Report date. Additional information to be provided in the report: 7) E

15、quipment serial number. 8) Test dates. 9) Hardware and/or software identification (including version numbers and modification state). 10) Authorization Signatures. 11) A list of the test equipment, ancillary equipment and supporting equipment used during the tests. 12) Deviations from the standard t

16、est procedures (e.g. test procedures defined by Notified Bodies). 5 Application form The information contained in this clause should be provided by the submitter prior to the testing. It contains product information as required by EN 301 893 i.4, clause 5.3.1 as well as other information which will

17、assist the test engineer in determining which tests have to be performed as well as the relevant test configurations and conditions. This application should form part of the final test report. 5.1 Information as required by EN 301 893 In accordance with EN 301 893 i.4, clause 5.3.1, the following in

18、formation was provided by the submitter: a) The Channel Plan(s): Channel Plan 1: Nominal Channel Bandwidth 1: MHz The associated centre frequencies: Nominal Channel Bandwidth 2: MHz The associated centre frequencies: NOTE 1: Add more lines if the equipment has more channel Bandwidths for this Channe

19、l Plan. ETSI ETSI TR 102 741 V1.1.1 (2009-11) 9Channel Plan 2: Nominal Channel Bandwidth 1: MHz The associated centre frequencies: Nominal Channel Bandwidth 2: MHz The associated centre frequencies: NOTE 2: Add more lines if the equipment has more Channel Plans. b) The different transmit operating m

20、odes: 1. Operating mode 1: Single Antenna Equipment a) Equipment with only 1 antenna b) Equipment with 2 diversity antennas but only 1 antenna active at any moment in time c) Smart Antenna Systems with 2 or more antennas, but operating in a (legacy) mode where only 1 antenna is used. (e.g. IEEE 802.

21、11a legacy mode in smart antenna systems) 2. Operating mode 2: Smart Antenna Systems - Multiple Antennas without beam forming a) Single spatial stream (e.g. IEEE 802.11a legacy mode) using Channel Bandwidth 1 b) High Throughput (more than 1 spatial stream) using Channel Bandwidth 1 c) High Throughpu

22、t (more than 1 spatial stream) using Channel Bandwidth 2 NOTE 3: Add more options if applicable for this operating mode (e.g. for other Channel Bandwidths) 3. Operating mode 3: Smart Antenna Systems - Multiple Antennas with beam forming a) Single spatial stream (e.g. IEEE 802.11a legacy mode) using

23、Channel Bandwidth 1 b) High Throughput (more than 1 spatial stream) using Channel Bandwidth 1 c) High Throughput (more than 1 spatial stream) using Channel Bandwidth 2 NOTE 4: Add more options if applicable for this operating mode (e.g. for other Channel Bandwidths) c) In case of Smart Antenna Syste

24、ms: The number of Receive chains: The number of Transmit chains: Equal power distribution among the transmit chains: Yes No In case of beam forming, the maximum beam forming gain: dB NOTE 5: Beam forming gain does not include the basic gain of a single antenna. d) TPC feature available: Yes No e) If

25、 the equipment has a TPC range: the lowest and highest power level (or lowest and highest EIRP level in case of integrated antenna equipment), intended antenna assemblies and corresponding operating frequency range for the TPC range (or for each of the TPC ranges if more than one is implemented). NO

26、TE 6: The current template assumes the UUT has 2 TPC ranges. Add more sections similar to the ones below if the equipment has more than 2 TPC ranges. ETSI ETSI TR 102 741 V1.1.1 (2009-11) 10TPC range 1: Applicable Frequency Range: 5 150 MHz to 5 350 MHz and 5 470 MHz to 5 725 MHz (Indoor) 5 470 MHz

27、to 5 725 MHz only (Outdoor only) Applicable power levels (see note): Tx out EIRP NOTE 7: Indicate whether the power levels specified are Transmitter Output Power levels or EIRP levels in case of integrated antenna equipment. Table 1: Power levels for TPC range 1 Operating Mode # Lowest setting (Plow

28、): (dBm) Highest setting (Phigh): (dBm) Per active Tx chain Total for all active Tx chains Per active Tx chain Total for all active Tx chains Mode 1 Mode 2 Mode 3 Beam forming possible: Yes No Intended Antenna Assemblies: Table 2: Intended Antenna Assemblies for TPC range 1 Ant. # Antenna Assembly n

29、ame Operating Mode Antenna Gain (dBi) Beam forming gain (dB) EIRP for Plow (dBm) EIRP for Phigh (dBm) 1 Mode 1 0 Mode 2 0 Mode 3 2 Mode 1 0 Mode 2 0 Mode 3 3 Mode 1 0 Mode 2 0 Mode 3 4 Mode 1 0 Mode 2 0 Mode 3 5 Mode 1 0 Mode 2 0 Mode 3 NOTE 1: Add more rows into the table If more antenna assemblies

30、 are intended for this TPC range. NOTE 2: The values for EIRP should represent the total EIRP for the system, taking all active Tx chains into account. NOTE 3: For equipment that is intended to be used with a variety of antennas, as a minimum, the antennas with the lowest and highest gain should be

31、listed in table 2 above. ETSI ETSI TR 102 741 V1.1.1 (2009-11) 11DFS Threshold level: dBm at the antenna connector in front of the antenna NOTE 8: According to EN 301 893 i.4, for equipment with a maximum EIRP Spectral Density of 10 dBm/MHz, the DFS threshold level shall be -62 dBm or less. This lev

32、el assumes a 0 dBi antenna gain. For devices employing different EIRP spectral density and/or a different receive antenna gain G (dBi), the DFS threshold level at the receiver input follows the following relationship: DFS Detection Threshold (dBm) = -62 + 10 - EIRP Spectral Density (dBm/MHz) + G (dB

33、i) However, the DFS threshold level shall not be lower than -64 dBm assuming a 0 dBi receive antenna gain To define the applicable threshold level at the (temporary) antenna connector, the gain of the antenna (in dBi) shall be added to the threshold level. If more than one antenna is intended for th

34、is TPC range or power setting, the antenna gain of the antenna with the lowest gain shall be used. TPC range 2: Applicable Frequency Range: 5 150 MHz to 5 350 MHz and 5 470 MHz to 5 725 MHz (Indoor) 5 470 MHz to 5 725 MHz only (Outdoor only) Applicable power levels: Tx out EIRP Table 3: Power levels

35、 for TPC range 2 Operating Mode # Lowest setting (Plow): (dBm) Highest setting (Phigh): (dBm) Per active Tx chain Total for all active Tx chains Per active Tx chain Total for all active Tx chains Mode 1 Mode 2 Mode 3 Beam forming possible: Yes No Intended Antenna Assemblies: ETSI ETSI TR 102 741 V1.

36、1.1 (2009-11) 12Table 4: Intended Antenna Assemblies for TPC range 2 Ant. # Antenna Assembly name Operating Mode # Antenna Gain (dBi) Beam forming gain (dB) EIRP for Plow (dBm) EIRP for Phigh (dBm) 1 Mode 1 0 Mode 2 0 Mode 3 2 Mode 1 0 Mode 2 0 Mode 3 3 Mode 1 0 Mode 2 0 Mode 3 4 Mode 1 0 Mode 2 0 M

37、ode 3 5 Mode 1 0 Mode 2 0 Mode 3 NOTE 1: Add more rows into the table If more antenna assemblies are intended for this TPC range. NOTE 2: The values for EIRP should represent the total EIRP for the system, taking all active Tx chains into account. NOTE 3: For equipment that is intended to be used wi

38、th a variety of antennas, as a minimum, the antennas with the lowest and highest gain should be listed in table 2 above. DFS Threshold level: dBm at the antenna connector in front of the antenna See also the note under table 2. f) If the equipment has no TPC feature, the maximum transmitter output p

39、ower level (or maximum EIRP level in case of integrated antenna equipment), the intended antenna assemblies, the corresponding operating frequency range and the corresponding DFS threshold level. If the equipment has multiple power levels and corresponding antenna assemblies, than this information s

40、hould be provided for each of the stated power levels. NOTE 9: The manufacturer may decide to declare that his equipment can operate with and without a TPC feature in which case he may provide details under both clauses e) and f) NOTE 10: The current template assumes the UUT has 2 power settings. Ad

41、d more sections similar to the ones below if the equipment has more power levels. Power Setting 1: Applicable Frequency Range: 5 150 MHz to 5 350 MHz and 5 470 MHz to 5 725 MHz (Indoor) 5 470 MHz to 5 725 MHz only (Outdoor only) Power level: TX out EIRP NOTE 11: Indicated whether the power levels sp

42、ecified are Transmitter Output Power levels or EIRP levels in case of integrated antenna equipment. ETSI ETSI TR 102 741 V1.1.1 (2009-11) 13Table 5: Power levels for Power Setting 1 Operating Mode # Power Level: (dBm) Per active Tx chain Total for all active Tx chains Mode 1 Mode 2 Mode 3 Beam formi

43、ng possible: Yes No Intended Antenna Assemblies: Table 6: Intended Antenna Assemblies for Power Setting 1 Ant. # Antenna Assembly name Operating Mode Antenna Gain (dBi) Beam forming gain (dB) EIRP (dBm) Mode 1 Mode 2 Mode 3 Mode 1 Mode 2 Mode 3 NOTE 1: Add more rows into the table If more antenna as

44、semblies are intended for this power setting. NOTE 2: The values for EIRP should represent the total EIRP for the system, taking all active Tx chains into account. NOTE 3: For equipment that is intended to be used with a variety of antennas, as a minimum, the antennas with the lowest and highest gai

45、n should be listed in table 2 above. DFS Threshold level: dBm at the antenna connector in front of the antenna NOTE 12: According to EN 301 893 i.4, for equipment with a maximum EIRP Spectral Density of 10 dBm/MHz, the DFS threshold level shall be -62 dBm or less. This level assumes a 0 dBi antenna

46、gain. For devices employing different EIRP spectral density and/or a different receive antenna gain G (dBi) the DFS threshold level at the receiver input follows the following relationship: DFS Detection Threshold (dBm) = -62 + 10 - EIRP Spectral Density (dBm/MHz) + G (dBi) However, the DFS threshol

47、d level shall not be lower than -64 dBm assuming a 0 dBi receive antenna gain. To define the applicable threshold level at the (temporary) antenna connector, the gain of the antenna (in dBi) shall be added to the threshold level. If more than one antenna is intended for this TPC range or power setti

48、ng, the antenna gain of the antenna with the lowest gain shall be used. ETSI ETSI TR 102 741 V1.1.1 (2009-11) 14Power Setting 2: Applicable Frequency Range: 5 150 MHz to 5 350 MHz and 5 470 MHz to 5 725 MHz (Indoor) 5 470 MHz to 5 725 MHz only (Outdoor only) Power level: TX out / EIRP NOTE 13: Indic

49、ated whether the power levels specified are Transmitter Output Power levels or EIRP levels in case of integrated antenna equipment Table 7: Power levels for Power Setting 2 Operating Mode # Power Level: (dBm) Per active Tx chain Total for all active Tx chains Mode 1 Mode 2 Mode 3 Beam forming possible: Yes No Intended Antenna Assemblies: Table 8: Intended Antenna Assemblies for Power Setting 2 Ant. # Antenna Assembly name Operating Mode Antenna Gain (dBi) Bea

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1