ETSI TR 170 002-2002 Project MESA Service Specification Group - Services and Applications Definitions Symbols and Abbreviations (V3 1 1)《项目MESA 业务规范组 业务和应用 定义 符号和缩写(版本3 1 1)》.pdf

上传人:roleaisle130 文档编号:737205 上传时间:2019-01-12 格式:PDF 页数:34 大小:2.15MB
下载 相关 举报
ETSI TR 170 002-2002 Project MESA Service Specification Group - Services and Applications Definitions Symbols and Abbreviations (V3 1 1)《项目MESA 业务规范组 业务和应用 定义 符号和缩写(版本3 1 1)》.pdf_第1页
第1页 / 共34页
ETSI TR 170 002-2002 Project MESA Service Specification Group - Services and Applications Definitions Symbols and Abbreviations (V3 1 1)《项目MESA 业务规范组 业务和应用 定义 符号和缩写(版本3 1 1)》.pdf_第2页
第2页 / 共34页
ETSI TR 170 002-2002 Project MESA Service Specification Group - Services and Applications Definitions Symbols and Abbreviations (V3 1 1)《项目MESA 业务规范组 业务和应用 定义 符号和缩写(版本3 1 1)》.pdf_第3页
第3页 / 共34页
ETSI TR 170 002-2002 Project MESA Service Specification Group - Services and Applications Definitions Symbols and Abbreviations (V3 1 1)《项目MESA 业务规范组 业务和应用 定义 符号和缩写(版本3 1 1)》.pdf_第4页
第4页 / 共34页
ETSI TR 170 002-2002 Project MESA Service Specification Group - Services and Applications Definitions Symbols and Abbreviations (V3 1 1)《项目MESA 业务规范组 业务和应用 定义 符号和缩写(版本3 1 1)》.pdf_第5页
第5页 / 共34页
点击查看更多>>
资源描述

1、ETSI TR 170 002 V3.1.1 (2002-12) Technical Repor Project MESA; Service Specification Group - Services and Applications; Definitions, symbols and abbreviations 2 ETSI TR 170 002 V3.1.1 (2002-12) Reference DTR/MESA-SAOOOOOVI 1 Keywords digital, radio, symbols, vocabulary ETSI 650 Route des Lucioles F-

2、O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of the present document can be downloaded from: http:lwmv

3、.etsi .arq The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printi

4、ng on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at ha p:/pa

5、 rta I. etsi I a rgltbistat uslstatus .as p If you find errors in the present document, send your comment to: Cori vriaht Notifica tion No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. O European Te

6、lecommunications Standards Institute 2002. All rights reserved. DECTTM, PLUGTESTSTMand UMTSTMare Trade Marks of ETSI registered for the benefit of its Members. TIPHONTM and the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ET

7、SI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI 3 ETSI TR 170 002 V3.1.1 (2002-12) Contents Intellectual Property Rights 4 Introduction 4 1 Scope 5 2 References 5 3 Definitions, symbols and abbreviations . 8 . 8 3.1 29 3.2 . . 30 3.3 Foreword . 4 History 34

8、 ETSI 4 ETSI TR 170 002 V3.1.1 (2002-12) Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found i

9、n ETSI SR 000 3 14: “Intellectual Property Rights (7PRs); Essential, orpotentially Essential, IPRs notlJied to ETSI in respect ofETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (5). All published ETSI deliverables shall include infor

10、mation which directs the reader to the above source of information. Foreword This Technical Report (TR) has been produced by the Public Safety Partnership Project (MESA). The contents of the present document are subject to continuing work within the Specification Group (SG) and may change following

11、formal SG approval. Should the SG modifi the contents of the present document, it will be re-released by the SG with an identifiing change of release date and an increase in version number as follows: Version x.y.z where: x the fiist digit: 1 2 3 the second digit is incremented for all changes of su

12、bstance, i.e. technical enhancements, corrections, updates, etc. the third digit is incremented when editorial only changes have been incorporated in the present document. presented to SG for information; presented to SG for approval; or greater indicates SG approved document under change control. y

13、 z I n t rod uct ion The present document presents a list of the definitions, abbreviations and symbols to be used in the documents prepared by Project MESA. It is intended as an explanatory dictionary, which may assist the MESA Partnership Project in maintaining a common, cross-regional understandi

14、ng of applied acronyms defining service concepts, technical terms and other commonly used expressions and symbols. It is the intention to keep the present document updated at regular intervals to support the Technical Specification Groups and Service Specification Groups of Project MESA. The definit

15、ions, abbreviations and symbols given are not intended to be exclusive. Definitions, abbreviations and symbols different from those given within the present document may be found in some Project MESA documents. However, the definitions, symbols and abbreviations given in the present document are gen

16、erally to be preferred. ETSI 5 ETSI TR 170 002 V3.1.1 (2002-12) 1 Scope The present document defines the basic applied terms, symbols and abbreviations as required by Project MESA to produce MESA Specifications and MESA Reports. It is also intended as a guidance document for other external bodies su

17、ch that misunderstandings can be minimized in situations of liaison and cooperation. The present document is applicable to deliverables produced by Project MESA. 2 Re fe re nces For the purposes of this Technical Report (TR) the following references apply: il NOTE: 21 NOTE: IS0 3 1-0: “Quantities an

18、d units - Part O: General principles“ Details of this and other IS0 standards can be found at lmn:/,si7.iso.h/ico:en/S0i0rrlinc.ocncrpage. ITU-T Recommendation Z. 100: “Specification and description language (SDL)“. Details of this and other Recommendations can be found on the Web page: hrtn :/www.

19、ihi.int/ITU-T/niibl icaictiis/in69ex,liinl, 31 41 51 ANSI T1.103: “Synchronous DS3 Format Specifications“. ANSI T1.105: “Baseline Document - SONET Rates and Formats Specifications“. ANSI T1.617: “Digital Subscriber SystemNo. 1 DSS1 Signaling Specification for Frame Relay Bearer Service“. NOTE: 61 NO

20、TE: Documents with a source citation beginning Tl. can be found on the Web at -. (U.S.) FED-STD-1037C (1996): “Glossary of Telecommunication Terms“. This U.S. Federal standard is in the public domain (not copyrighted), and can be accessed at hrtn:/.itc.l69oc.ocPv/fs-1037/ However, for the latest edi

21、tion of the glossary see hrtn :www.ati s.ordt p2Wt I g-forw.htni1. 71 NOTE: T1.523-2001: “Telecom Glossary 2000, 2001“. This U.S. and international glossary is copyrighted. The public can view this glossary free on the Web at httn:/mv. atis,or:tto2W. SI NFPA1221: “Standard for the Installation, Main

22、tenance, and Use of Public Emergency Service Communications Systems“, 2002 Edition. PASS systems are defiied in NFPA 1982, Standard on Personal Alert Safety Systems PASS, 1998 Edition. 91 NOTE: Code of Federal Regulations 47: “Telecommunications“ (rev. Oct. 1, 1987, Oct. 1988 Part 1 : Introduction a

23、nd general model“. SANCHO (ITU-T Sector Abbreviations and defiNitions for a teleCommunication taesaurus Oriented database) httu :/www. itu, inr/sancho/. ITU-T Recommendation H. 235: “Security and encryption for H-Series (H.323 and other H. 245 -based) multimedia terminals“. ITU-T Recommendation X. 8

24、00: “Security architecture for Open Systems Interconnection for CCITT applications“. ITU-T Recommendation T. 173 : “MHEG-3 script interchange representation“. ITU-T Recommendation T. 174: “Application programming interface (API) for MHEG-1 I. ITU-T Recommendation T. 175: “Application Programming Int

25、erface (API) for MHEG-5“. ITU-T Recommendation T. 176: “Application Programming Interface (API) for Digital Storage Media Command and Control (DSM-CC)“. ITU-T Recommendation M.60: “Maintenance terminology and definitions“. ITU-T Recommendation G. 841 : “Types and characteristics of SDH network prote

26、ction architectures“. ITU-T Recommendation F.400/X.400: “Message handling services: Message handling system and service overview“. ITU-T Recommendation E.417: “Framework for the network management of IP-Based networks“. ITU-T Recommendation Y. 101 : “GI1 Terminology - Terms and definition“. ITU-T Re

27、commendation Q.93 1 : “Fault and performance management Of V5 interface environments and associated customer profiles“. ITU-T Recommendation J.93 : “Requirements for conditional access in the secondary distribution of digital television on cable television systems“. ITU-T Recommendation J.95: “Copy

28、protection of intellectual property for content delivered on cable television systems“. ITU-T Recommendation G.703 : “Physical/electrical characteristics of hierarchical digital interfaces“. ITU-T Recommendation Q.9: “Vocabulary of switching and signalling terms“. ITU-T Recommendation J. 1 12: “Tran

29、smission systems for interactive cable television services“. ITU-T Recommendation J. 1 16: “Interaction channel for local multipoint distribution systems“. ITU-T Recommendation Y. 1 10: “Global Information Infrastructure principles and framework architecture“. ITU-T Recommendation 1.21 1: “B-ISDN se

30、rvice aspects“. ITU-T Recommendation E.2 12: “The international identification plan for mobile terminals and mobile users“. ITU-T Recommendation F. 1 16: “Service features and operational provisions in IMT-2000“. ETSI 7 ETSI TR 170 002 V3.1.1 (2002-12) i351 i3 61 i3 81 i401 i371 i3 91 i411 i421 i43

31、1 i441 i451 i461 i471 i481 i491 i501 i511 i521 i531 i541 i551 i561 ITU-T Recommendation H.341: “Multimedia management information base“. ITU-T Recommendation H.323 : “Packet-based multimedia communications systems“. ITU-T Recommendation 1.430: “Basic user-network interface - Layer 1 specification“.

32、ITU-T Recommendation 1.43 1 : “Primary rate user-network interface - Layer 1 specification“ ITU-T Recommendation I. 112: “Vocabulary of terms for ISDNs“. ITU-T Recommendation J. 120: “Distribution of sound and television programs over the IP network“. ITU-T Recommendations J. 160: “Architectural fra

33、mework for the delivery of time-critical services over cable television networks using cable modems“. ITU-T Recommendation X.642: “Information technology - Quality of service - Guide to methods and mechanisms“. ITU-T Recommendation Q. 175 1 : “Internetwork signalling requirements for IMT-2000 capabi

34、lity set 1“. ITU-T Recommendation Q. 171 1 : “Network functional model for IMT-2000“. ITU-T Recommendation T. 180: “Homogeneous access mechanism to communication services“. ITU-T Recommendation G.994.1: “Handshake procedures for digital subscriber line (DSL) transceivers“. ITU-T Recommendation F. 11

35、5: “Service objectives and principles for future public land mobile telecommunication systems“. ITU-T Recommendation F. 85 1 : “Universal Personal Telecommunication (UPT) - Service description (service set 1)“. ITU-T Recommendation F. 852: “Universal personal telecommunication (UPT) - Service descri

36、ption (service set 2)“. ITU-T Recommendation I. 1 14: “Vocabulary of terms for universal personal telecommunication“ ITU-T Recommendation 1.373 : “Network capabilities to support universal personal telecommunication (UPT)“. ITU-T Recommendation 1.570: “Public/private ISDN intenvorking“. ITU-T Recomm

37、endation X.903 : “Information technology - Open distributed processing - Reference Model: Architecture“. ITU-T Recommendation X.224: “Information technology - Open Systems Interconnection - Protocol for providing the connection-mode transport service“. ITU-T Recommendation X.634: “Information techno

38、logy - Open Systems Interconnection - Transport Fast Byte Protocol“. ITU-T Recommendation X.633 : “Information technology - Open systems Interconnection - Network Fast Byte Protocol“. ANSI X9.52: “Triple Data Encryption Algorithm Modes of Operation“. ITU-T Recommendation Q.83 1.1 : “Access Managemen

39、t for V5“. ITU-T Recommendation G. 174: “Transmission performance objectives for terrestrial digital wireless systems using portable terminals to access the PSTN“. ITU-T Recommendation F. 850: “Principles of universal personal telecommunication (UPT)“ ETSI 8 ETSI TR 170 002 V3.1.1 (2002-12) ITU-T Re

40、commendation X.200: “Information technology - Open Systems Interconnection - Basic Reference Model: The basic model“. ITU-T Recommendation X.300: “General principles for interworking between public networks and between public networks and other networks for the provision of data transmission service

41、s“. ITU-T Recommendation T. 88: “Information technology - Coded representation of picture and audio information - LossyAossless coding of bi-level images“. ITU-T Recommendation V.253: “Control of voice-related functions in a DCE by an asynchronous DTE“. 3 3.1 Definitions, symbols and abbreviations D

42、e fi nit ions For the purposes of the present document, the following terms and definitions apply: 12 lead electrocardiogram (ECG): non invasive medical process involving 12 readings from 10 leads attached to a patient to determine various types of Cardiac related conditions access control: preventi

43、on of unauthorized use of a resource, including the prevention of use of a resource in an unauthorized manner NOTE 1 : Also note User Access Point. NOTE 2: See ITU-T Recommendation H. 235 13, 3.1; X.800 14, 3.3.1. access network network that provides the link between the terminal function and the ac

44、cess function NOTE: SeeT1.103 3, 3.1. T1.105 4, 3.1. adaptive radio frequency modulation: ability of a network system to automatically adjust the rate fallback within the network by changing the error correction andor modulation scheme to maintain reliable throughput ad-hoc network network that is e

45、stablished on a temporary basis in order to respond to a specific series of transaction(s) or emergency activities. Network would normally be torn down at the end of that emergency or operation transaction Amplitude Modulation (AM): modulation in which the amplitude of a carrier wave is varied in ac

46、cordance with some characteristic of the modulating signal NOTE: Amplitude modulation implies the modulation of a coherent carrier wave by mixing it in a nonlinear device with the modulating signal to produce discrete upper and lower sidebands, which are the sum and difference frequencies of the car

47、rier and signal. The envelope of the resultant modulated wave is an analog of the modulating signal. The instantaneous value of the resultant modulated wave is the vector sum of the corresponding instantaneous values of the carrier wave, upper sideband, and lower sideband. Recovery of the modulating

48、 signal may be by direct detection or by heterodyning 6. analog modulation: modulation technique whereby message signal, which is the analog of some physical quantity, is impressed on a carrier signal for transmission through a channel (e.g. FM) NOTE: See 6. analog modulation technique: process wher

49、eby message signal, which is the analog of some physical quantity, is impressed on a carrier signal for transmission through a channel (e.g. FM) Application Programming Interface (API): BOUNDARY across which a software application uses facilities of programming languages to invoke software services NOTE 1: These facilities may include procedures or operations, shared data objects and resolution of identifiers NOTE 2: See ITU-T Recommendations T.176 18, 3.1; T.173 15, 3.1.1, T.174 16, 3.1.1, andT.175 17, 3.1.1. ETSI 9 ETSI TR 170

展开阅读全文
相关资源
猜你喜欢
  • ASTM D6766-2006a Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids《评价被潜在不可溶液体渗透的土工合成粘土衬液压特性的标准.pdf ASTM D6766-2006a Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids《评价被潜在不可溶液体渗透的土工合成粘土衬液压特性的标准.pdf
  • ASTM D6766-2009 516 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids《评价被潜在不可溶液体渗透的土工合成粘土衬液压特性.pdf ASTM D6766-2009 516 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids《评价被潜在不可溶液体渗透的土工合成粘土衬液压特性.pdf
  • ASTM D6766-2012 0625 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions《评价被潜在不可溶水液体渗透.pdf ASTM D6766-2012 0625 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions《评价被潜在不可溶水液体渗透.pdf
  • ASTM D6766-2018 red 3125 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions《渗透有潜在不相容水.pdf ASTM D6766-2018 red 3125 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Aqueous Solutions《渗透有潜在不相容水.pdf
  • ASTM D6767-2002 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test《用毛细管流量试验测定纺织物的标准试验方法》.pdf ASTM D6767-2002 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test《用毛细管流量试验测定纺织物的标准试验方法》.pdf
  • ASTM D6767-2008 781 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test《用毛细管流量试验测定纺织物的标准试验方法》.pdf ASTM D6767-2008 781 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test《用毛细管流量试验测定纺织物的标准试验方法》.pdf
  • ASTM D6767-2011 0000 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test《通过毛细流动测试描述土工织物的孔大小的标准试验方法》.pdf ASTM D6767-2011 0000 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test《通过毛细流动测试描述土工织物的孔大小的标准试验方法》.pdf
  • ASTM D6767-2014 red 8794 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test《用毛细管流量试验测定土工织物孔隙大小特征的标准试验方法》.pdf ASTM D6767-2014 red 8794 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test《用毛细管流量试验测定土工织物孔隙大小特征的标准试验方法》.pdf
  • ASTM D6767-2016 3102 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test《用毛细管流测试测定土工织物孔径特性的标准试验方法》.pdf ASTM D6767-2016 3102 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test《用毛细管流测试测定土工织物孔径特性的标准试验方法》.pdf
  • 相关搜索

    当前位置:首页 > 标准规范 > 国际标准 > 其他

    copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
    备案/许可证编号:苏ICP备17064731号-1