1、 ETSI TS 100 812-1 V2.2.5 (2003-10)Technical Specification Terrestrial Trunked Radio (TETRA);Subscriber Identity Module toMobile Equipment (SIM-ME) interface;Part 1: Universal Integrated Circuit Card (UICC);Physical and logical characteristicsETSI ETSI TS 100 812-1 V2.2.5 (2003-10) 2 Reference RTS/T
2、ETRA-03126 Keywords card, security, SIM, TETRA ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice
3、Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Do
4、cument Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on th
5、e current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and
6、 the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being reg
7、istered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 100 812-1 V2.2.5 (2003-10) 3 Contents Intellectual Property Rights4 Foreword.4 Introduction 4 1 Scope 5 2 References 5 3 Defi
8、nitions, symbols, abbreviations and coding.5 3.1 Definitions5 3.2 Symbols5 3.3 Abbreviations .5 3.4 Coding 6 4 Physical and logical characteristics6 Annex A (informative): Change Requests7 History 8 ETSI ETSI TS 100 812-1 V2.2.5 (2003-10) 4 Intellectual Property Rights IPRs essential or potentially
9、essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs n
10、otified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee
11、 can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Project Terrestrial Trunked Radio (TE
12、TRA). The present document is part 1 of a multi-part deliverable covering the Subscriber Identity Module to Mobile Equipment (SIM-ME) interface, as identified below: TS 100 812-1: “Universal Integrated Circuit Card (UICC); Physical and logical characteristics“; TS 100 812-2: “Universal Integrated Ci
13、rcuit Card (UICC); Characteristics of the TSIM application“; EN 300 812-3: “Integrated Circuit (IC); Physical, logical and TSIM application characteristics“. NOTE: Part 3 was originally published as EN 300 812 and defines different technology than part 1 and part 2. Introduction The present document
14、 defines a generic terminal/Integrated Circuit Card (ICC) interface. The present document is independent of the TETRA application and can thus be the platform for any IC card application. The aim of the present document is to ensure interoperability between an ICC and a terminal independently of the
15、 respective manufacturer, card issuer or operator. The present document does not define any aspects related to the administrative management phase of the ICC. Any internal technical realization of either the ICC or the terminal is only specified where these are reflected over the interface. Applicat
16、ion specific details for applications residing on an ICC are specified in the respective application specific documents. ETSI ETSI TS 100 812-1 V2.2.5 (2003-10) 5 1 Scope The present document specifies the interface between the UICC and the terminal. The present document specifies: the requirements
17、for the physical characteristics of the UICC; the electrical interface between the UICC and the terminal; the initial communication establishment and the transport protocols; the model which serves as a basis for the logical structure of the UICC; the communication commands and the procedures; the a
18、pplication independent files and protocols. The administrative procedures and initial card management are not part of the present document. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the present document. References are eit
19、her specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to be publicly available in the ex
20、pected location might be found at http:/docbox.etsi.org/Reference. 1 ETSI TS 102 221: “Smart cards; UICC-Terminal interface; Physical and logical characteristics (Release 5)“. 2 ETSI TS 100 812-2: “Terrestrial Trunked Radio (TETRA); Subscriber Identity Module to Mobile Equipment (SIM-ME) interface;
21、Part 2: Characteristics of the TSIM application“. 3 Definitions, symbols, abbreviations and coding 3.1 Definitions For the purposes of the present document, the terms and definitions given in TS 102 221 1 apply. 3.2 Symbols For the purposes of the present document, the symbols defined in TS 102 221
22、1 apply. 3.3 Abbreviations For the purposes of the present document, the abbreviations defined in TS 102 221 1 apply. ETSI ETSI TS 100 812-1 V2.2.5 (2003-10) 6 3.4 Coding For the purposes of the present document, the coding defined in TS 102 221 1 applies. 4 Physical and logical characteristics The
23、UICC/terminal interface shall comply with all requirements stated in TS 102 221 1. Where options are indicated in TS 102 221 1, TS 100 812-2 2 specifies which option shall be used for a UICC/terminal interface where the UICC supports a TSIM. ETSI ETSI TS 100 812-1 V2.2.5 (2003-10) 7 Annex A (informa
24、tive): Change Requests The present document contain Change Requests as described in table A.1. Table A.1: Change Requests CR No CR vers Version TS ES Clauses affected Title Source CR Status 001 10 V2.2.2 X X 4 Essential Correction on TETRA TSIM application Schlumberger EPT approved 030618 ETSI ETSI TS 100 812-1 V2.2.5 (2003-10) 8 History Document history V2.2.1 April 2002 Publication V2.2.2 September 2002 Publication as ES 200 812-1 V2.2.5 October 2003 Membership Approval Procedure MV 20031212: 2003-10-14 to 2003-12-12 V2.2.5 October 2003 Publication
