1、 ETSI TS 101 376-3-19 V2.2.1 (2005-03)Technical Specification GEO-Mobile Radio Interface Specifications (Release 2)General Packet Radio Service;Part 3: Network specifications;Sub-part 19: Optimal Routing technical realization;GMPRS-1 03.297GMPRS-1 03.297 ETSI ETSI TS 101 376-3-19 V2.2.1 (2005-03) 2
2、Reference RTS/SES-00237-3-19 Keywords GMPRS, GMR, GSM, GSO, interface, MES, mobile, MSS, radio, satellite, S-PCN ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enreg
3、istre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in conten
4、ts between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document
5、 may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the following services: http:/portal.etsi.org/
6、chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2005. All rights reserved. DECTTM, PLUGTESTSTM and U
7、MTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GM
8、PRS-1 03.297 ETSI ETSI TS 101 376-3-19 V2.2.1 (2005-03) 3 Contents Intellectual Property Rights4 Foreword.4 Introduction 5 1 Scope 7 2 References 7 3 Definitions and abbreviations.8 3.1 Definitions8 3.2 Abbreviations .8 4 Feature description .9 4.1 Overview 9 4.2 Sequence summary.9 4.2.1 Optimal rou
9、te gateway selection.11 4.2.2 RR connection and MM session behaviour at the MES12 4.2.2.1 MES supporting circuit switches services only.12 4.2.2.2 MES in GMPRS Class-B mode of operation 13 4.2.3 Reregistration with local GS after call completion.15 4.3 Legal interception.15 4.4 Multiple satellite op
10、eration.15 4.5 Resource negotiation procedures16 4.6 Exceptional conditions .17 4.6.1 Routing response indicates call handling procedures .17 4.6.2 Glare conditions17 4.6.3 Location update rejected at optimal gateway station 17 4.7 Interactions of optimal routing with supplementary services.18 4.7.1
11、 Call forwarding.18 4.7.2 Barring of Outgoing International Calls .19 5 Functional requirements.19 5.1 Functional behaviour of NSS elements 19 5.1.1 Functional behaviour of VMSC-A19 5.1.2 Functional behaviour of VLR-A.19 5.1.3 Functional behaviour of GMSC19 5.1.4 Functional behaviour of HLR .19 5.1.
12、5 Functional behaviour of VMSC-B19 5.2 Functional behaviour of GS elements 20 5.2.1 GS digit translation .20 5.2.2 Roaming Agreements (RA) 20 5.2.3 HLR query 20 5.3 Functional behaviour of MES 21 Annex A (informative): Bibliography.22 History 23 GMPRS-1 03.297 ETSI ETSI TS 101 376-3-19 V2.2.1 (2005-
13、03) 4 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Pr
14、operty Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, i
15、ncluding IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS
16、) has been produced by ETSI Technical Committee Satellite Earth Stations and Systems (SES). The contents of the present document are subject to continuing work within TC-SES and may change following formal TC-SES approval. Should TC-SES modify the contents of the present document it will then be rep
17、ublished by ETSI with an identifying change of release date and an increase in version number as follows: Version 2.m.n where: the third digit (n) is incremented when editorial only changes have been incorporated in the specification; the second digit (m) is incremented for all other types of change
18、s, i.e. technical enhancements, corrections, updates, etc. The present document is part 3, sub-part 19 of a multi-part deliverable covering the GEO-Mobile Radio Interface Specifications (Release 2) General Packet Radio Service, as identified below: Part 1: “General specifications“; Part 2: “Service
19、specifications“; Part 3: “Network specifications“: Sub-part 1: “Network Functions“; Sub-part 2 : “Network Architecture“; Sub-part 3: “Numbering, addressing and identification“; Sub-part 4: “Organization of Subscriber Data“; Sub-part 5: “Technical realization of Supplementary Services“; Sub-part 6: “
20、Location Registration and Position Identification Procedures“; Sub-part 7: “Discontinuous Reception (DRX)“; Sub-part 8: “Support of Dual-Tone Multifrequency Signalling (DTMF)“; Sub-part 9: “Security related Network Functions“; Sub-part 10: “Functions related to Mobile Earth Station (MES) in idle mod
21、e“; Sub-part 11: “Technical realization of the Short Message Service (SMS) Point-to-Point (PP)“; Sub-part 12: “Technical realization of the Short Message Service Cell Broadcast (SMSCB)“; GMPRS-1 03.297 ETSI ETSI TS 101 376-3-19 V2.2.1 (2005-03) 5 Sub-part 13: “Technical realization of group 3 facsim
22、ile using transparent mode of transmission“; Sub-part 14: “Transmission Planning Aspects of the Speech Service in the GMR-1 system“; Sub-part 15: “Line Identification supplementary service - Stage 2“; Sub-part 16: “Call Barring (CB) supplementary services - Stage 2“; Sub-part 17: “Unstructured Suppl
23、ementary Service Data (USSD) - Stage 2“; Sub-part 18: “Terminal-to-Terminal Call (TtT)“; Sub-part 19: “Optimal Routing technical realization“; Sub-part 20: “Technical realization of High-Penetration Alerting“; Sub-part 21: “Position Reporting services; Stage 2 Service description“; Sub-part 22: “Ove
24、rall description of the GMPRS radio interface; Stage 2“; Part 4: “Radio interface protocol specifications“; Part 5: “Radio interface physical layer specifications“; Part 6: “Speech coding specifications“; Part 7: “Terminal adaptor specifications“. Introduction GMR stands for GEO (Geostationary Earth
25、 Orbit) Mobile Radio interface, which is used for mobile satellite services (MSS) utilizing geostationary satellite(s). GMR is derived from the terrestrial digital cellular standard GSM and supports access to GSM core networks. The present document is part of the GMR Release 2 specifications. Releas
26、e 2 specifications are identified in the title and can also be identified by the version number: Release 1 specifications have a GMR-1 prefix in the title and a version number starting with “1“ (V1.x.x.). Release 2 specifications have a GMPRS-1 prefix in the title and a version number starting with
27、“2“ (V2.x.x.). The GMR release 1 specifications introduce the GEO-Mobile Radio interface specifications for circuit mode mobile satellite services (MSS) utilizing geostationary satellite(s). GMR release 1 is derived from the terrestrial digital cellular standard GSM (phase 2) and it supports access
28、to GSM core networks. The GMR release 2 specifications add packet mode services to GMR release 1. The GMR release 2 specifications introduce the GEO-Mobile Packet Radio Service (GMPRS). GMPRS is derived from the terrestrial digital cellular standard GPRS (included in GSM Phase 2+) and it supports ac
29、cess to GSM/GPRS core networks. Due to the differences between terrestrial and satellite channels, some modifications to the GSM standard are necessary. Some GSM specifications are directly applicable, whereas others are applicable with modifications. Similarly, some GSM specifications do not apply,
30、 while some GMR specifications have no corresponding GSM specification. Since GMR is derived from GSM, the organization of the GMR specifications closely follows that of GSM. The GMR numbers have been designed to correspond to the GSM numbering system. All GMR specifications are allocated a unique G
31、MR number. This GMR number has a different prefix for Release 2 specifications as follows: Release 1: GMR-n xx.zyy. Release 2: GMPRS-n xx.zyy. where: - xx.0yy (z = 0) is used for GMR specifications that have a corresponding GSM specification. In this case, the numbers xx and yy correspond to the GSM
32、 numbering scheme. GMPRS-1 03.297 ETSI ETSI TS 101 376-3-19 V2.2.1 (2005-03) 6 - xx.2yy (z = 2) is used for GMR specifications that do not correspond to a GSM specification. In this case, only the number xx corresponds to the GSM numbering scheme and the number yy is allocated by GMR. - n denotes th
33、e first (n = 1) or second (n = 2) family of GMR specifications. A GMR system is defined by the combination of a family of GMR specifications and GSM specifications as follows: If a GMR specification exists it takes precedence over the corresponding GSM specification (if any). This precedence rule ap
34、plies to any references in the corresponding GSM specifications. NOTE: Any references to GSM specifications within the GMR specifications are not subject to this precedence rule. For example, a GMR specification may contain specific references to the corresponding GSM specification. If a GMR specifi
35、cation does not exist, the corresponding GSM specification may or may not apply. The applicability of the GSM specifications is defined in GMPRS-1 01.201 2. GMPRS-1 03.297 ETSI ETSI TS 101 376-3-19 V2.2.1 (2005-03) 7 1 Scope The present document defines the performance requirements for the Mobile Ea
36、rth Station (MES) radio transceiver for the GMR-1 Mobile Satellite System. Requirements are defined for two categories of parameters: Those that are required to provide compatibility among the radio channels, connected either to separate or common antennas, which are used in the system. This categor
37、y also includes parameters providing compatibility with existing systems in the same or adjacent frequency bands. Those that define the transmission quality of the system. 2 References The following documents contain provisions which, through reference in this text, constitute provisions of the pres
38、ent document. References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. Referenced documents which are not found to
39、 be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. 1 GMPRS-1 01.004 (ETSI TS 101 376-1-1): “GEO-Mobile Radio Interface Specifications (Release 2); General Packet Radio Service (GMPRS); Part 1: General specifications; Sub-part 1: Abbreviations and acron
40、yms“. 2 GMPRS-1 01.201 (ETSI TS 101 376-1-2): “GEO-Mobile Radio Interface Specifications (Release 2); General Packet Radio Service (GMPRS); Part 1: General specifications; Sub-part 2: Introduction to the GMR-1 Family“. 3 GMPRS-1 03.022 (ETSI TS 101 376-3-10): “GEO-Mobile Radio Interface Specificatio
41、ns (Release 2); General Packet Radio Service (GMPRS); Part 3: Network specifications; Sub-part 10: Functions related to Mobile Earth Station (MES) in idle mode“. 4 GMR-1 03.296 (ETSI TS 101 376-3-18): “GEO-Mobile Radio Interface Specifications; Part 3: Network specifications; Sub-part 18: Terminal-t
42、o-Terminal Call (TtT)“. NOTE: This is a reference to a GMR-1 Release 1 specification. See the introduction for more details. 5 GMR-1 03.299 (ETSI TS 101 376-3-21): “GEO-Mobile Radio Interface Specifications; Part 3: Network specifications; Sub-part 21: Position Reporting services; Stage 2 Service de
43、scription“. NOTE: This is a reference to a GMR-1 Release 1 specification. See the introduction for more details. 6 GMPRS-1 04.008 (ETSI TS 101 376-4-8): “GEO-Mobile Radio Interface Specifications (Release 2); General Packet Radio Service (GMPRS); Part 4: Radio interface protocol specifications; Sub-
44、part 8: Mobile Radio Interface Layer 3 Specifications“. 7 GSM 02.79: “Digital Cellular Telecommunications System (Phase 2+); Support of Optimal Routing (SOR); Service Definition, Stage 1 (Release 1996)“. 8 GSM 03.79 (ETSI TS 101 045): “Digital cellular telecommunications system (Phase 2+); Support o
45、f Optimal Routeing (SOR); Technical realization (Release 1996)“. GMPRS-1 03.297 ETSI ETSI TS 101 376-3-19 V2.2.1 (2005-03) 8 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in GMPRS-1 01.201 2 and the following apply. The foll
46、owing definitions are expressed within the context of optimal routing: authorized roamer: subscriber whose PLMN is present in roaming agreements at the GS to which the subscriber is attempting to reregister NOTE: Similarly, an Unauthorized Roamer is a subscriber who is denied service at the requeste
47、d GS due to the absence of a roaming agreement between the subscribers home PLMN and the GS to which the subscriber is trying to reregister. BCCH Carrier: RF carrier that carries the FCCH and BCCH. The BCCH carriers may be reused within the system as long as the spot beams in which they are reused a
48、re neither overlapping nor immediately adjacent to one another Broadcast Control Channel (BCCH): carries control information specific to a particular Gateway Station, plus synchronization information by which an MES can locate other BCCHs within the system NOTE: There is a unique BCCH for every Gate
49、way in every spot beam. Cooperating PLMN: PLMN to which an HLR query (SRI/ATI/SRI-SMS) may be composed from the GS for the purpose of OR. Similarly, a Non-Cooperating PLMN is a PLMN to which an HLR query by the GS is prohibited gateway operator: administrative entity that manages a GS and its resources GS (Gateway Station): network entity connected to the terrestrial network that allows network access to and from a user terminal local GS: GS to which the MES registers when not governed by optimal routing concerns NOTE: The selectio
