1、ETSI TS 101 674-2 1.1.1 (2000-05) Technical Specification Technical Framework for the Provision of Interoperable ATM Services; Part 2: Network Management (X-interface) Specification for Phase 1 Implementation 2 ETSI TS 1 O1 674-2 V1.l.l (2000-05) The pre ent d Reference DTSIEASI-00002-2 Keywords ATM
2、, interface, service ETSI 650 Route des Lucioles F-O6921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 O0 Fax: +33 4 93 65 47 16 Siret No 348 623 562 0001 7 - NAF 742 C Association but non lucratif enregistre la Sous-prfecture de Grasse (06) No 7803/88 Important notice Individual copies of th
3、e present document can be downloaded from: http:/w.etsi.aq cument mav be made available in more than one electronic version or in orint. In anv case f existing or perceived difference in coitents between such versions, the reference version is the Poiable Docuhent Format (PDF). In case of dispute, t
4、he reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI do
5、cuments is available at ht?p:/.etsi.orn/lb/status/ If you find errors in the present document, send your comment to: editor et.si.fr Coovriaht Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all
6、media. O European Telecommunications Standards Institute 2000. All rights reserved. ETSI 3 ETSI TS 1 O1 674-2 V1.l.l (2000-05) Contents Intellectual Property Rights 4 Foreword 4 1 2 3 3.1 3.2 4 4.1 4.2 4.3 4.4 4.5 4.6 4.7 5 5.1 5.1.1 5.1.2 5.2 5.2.1 5.2.2 5.2.3 5.2.4 5.2.5 5.2.6 5.2.7 5.2.8 6 Scope
7、5 References 5 Definitions and abbreviations 7 Definitions 7 Abbreviations . 8 Network Architecture and related aspects . 9 Overview 9 Requirement for shared network topology information 10 Traffic and Capacity Planning 11 Management of Interworking with non-ATM-Networks 11 Generic requirements and
8、capabilities of the ATM X.easi Interface (NM Plane) for Phase 1 . 11 Inter-operator Communications 11 Automated Exchange of Management Information 12 Manual Exchange of Management Information 12 Network Management Functional Areas 12 Overview . 12 Configuration Management 13 Fault Management 13 Perf
9、ormance Management 13 Security Management . 15 Management of “Supplementary Services“ . 16 Management of Switched Services . 16 Interoperability Testing 16 Management Identifier Scheme 10 Connection Admission Control 11 Management of the Multiplexing of VCCs into a VPC 11 Accounting Management 14 An
10、nex A (informative): Annex B (informative): An ATM Interconnect Service Processes Model 17 Example of a “Business Model“ for the provisioning of managed ATM transport services across multiple interconnected ATM networks . 20 History 23 ETSI 4 ETSI TS 1 O1 674-2 V1.l.l (2000-05) Intellectual Property
11、 Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in SR O00 3 14: “Intellectual Propero Rights (IPRs); Essential,
12、 or potentially Essential, IPRs notifed to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (h ttix/www.etsi. ocdini). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out
13、by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in SR O00 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ETSI Project ATM Services
14、Interoperability (EASI). The present document is part 2 of a multi-part TS covering the Technical Framework for the Provision of Interoperable ATM Services, as identified below: Part 1: “1-Interface User and Control plane specification (including network functions and service aspects) Phase 1“; Part
15、 2: “Network Management (X-interface) Specification for Phase 1 implementation“. The draft of the present document has been produced from studies mostly carried out in EURESCOM P813. EURESCOM documents may be obtained by writing to EURESCOM GmbH, Schloss-Wolfsbrunnenweg 35, D-69118 Heidelberg, Germa
16、ny, or referring to: httn:/www.e uressom.de. Further detailed information can be found in ETSI TR 101 477 i “Guidelines for the use of ETSI TS 101 674-2“. ETSI 5 ETSI TS 1 O1 674-2 V1.l.l (2000-05) 1 Scope The present document specifies a TMN X-interface for the transfer of network management inform
17、ation for interoperable ATM services. This interface, for which hereafter in the present document the term “X.easi interface“ is used, allows for the management of interconnected ATM networks in order to provide ATM based services across network boundaries. The present document describes the X.easi
18、interface together with essential supporting administrative processes including: A description of the network architecture and related aspects including management processes; ATM network management requirements and capabilities of the X.easi interface; Testing issues. In addition, two informative an
19、nexes are provided to describe (A) an “ATM interconnect services and processes model“, which provides an example of processes associated with the use of the User and Control network to network interface specification (“NNI.easi“) specified in ETSI TS 101 674-1 2 and the X.easi interface; (B) an exam
20、ple of a reasonable “Business Model“ for the roles which organizations might play in the framework of providing ATM interconnection services. 2 References The following documents contain provisions that, through reference in the text, constitute provisions of the present document. References are eit
21、her specific (identified by date of publication, edition number, version number, etc.) or non-specific. For a specific reference, subsequent revisions do not apply. For a non-specific reference, the latest version applies. A non-specific reference to an ETS shall also be taken to refer to later vers
22、ions published as an EN with the same number. il Pl ETSI TR 101 477 (Vl.1): “Guidelines for the use of ETSI TS 101 674-2“. ETSI TS 101 674-1 (V1.2): “Technical Framework for the Provision of Interoperable ATM Services; Part 1: NNI-Interface User and Control plane specification (including network fun
23、ctions and service aspects) Phase 1“. ETSI EN 300 820-1 (Vl.1): “Telecommunications Management Network (TMN); Management information model for the X-type interface between Operation Systems (0%) of a Virtual Path (VP)/Virtual Channel (VC) cross connected network; Part 1: Configuration management asp
24、ects“. ITU-T Recommendation M. 1400 (1997): “Designations for international networks“, and Amendment. 31 41 51 61 71 ITU-T Recommendation E. 164: “Numbering Plan for the ISDN Era“. ITU-T Recommendation E. 19 1: “B-ISDN numbering and addressing“. ITU-T Recommendation 1.37 1: “Traffic control and cong
25、estion control in B-ISDN“ SI ETSI ETS 300 301 (1997): “Broadband Integrated Services Digital Network (B-ISDN); Traffic control and congestion control in B-ISDN ITU-T Recommendation 1.371 (1996)l“. Pl ITU-T Recommendation E.735 (1997): “Framework for traffic control and dimensioning in B-ISDN“ . ETSI
26、 6 ETSI TS 1 O1 674-2 V1.l.l (2000-05) ITU-T Recommendation M.30 10 (1996): “Principles for a Telecommunications management network“. ITU-T Recommendation M.3400 (1997): “TMN management functions“. ITU-T Recommendation 1.75 1 (1996): “Asynchronous transfer mode management of the network element view
27、“. ETSI ETS 300 469 (1998): “Broadband Integrated Services Digital Network (B-ISDN); Asynchronous Transfer Mode (ATM); Management of the network element view ITU-T Recommendation 1.75 1 (1996)l“. ITU-T Recommendation X.700 (1992): “Management framework for Open Systems Interconnection (OSI) for CCIT
28、T applications“. ITU-T Recommendation X.721: “Information technology - Open Systems Interconnection - Structure of management information: definition of management information“, February 1992 + later corrigenda to June 1998. ITU-T Recommendation M.3 100 (1995): “Generic network information model“. E
29、TSI ES 200 653 (Vi .2): “Telecommunications Management Network (TMN); Network level generic class library“. ITU-T Recommendation X.790 (1995): “Trouble management function for ITU-T applications“. ITU-T Recommendation M. 1540 (1994): “Exchange of information for planned outages of transmission syste
30、ms“. ITU-T Recommendation M. 1550 (1992): “Escalation procedure“. ITU-T Recommendation M. 1560 (1992): “Escalation procedure for international leased circuits“ ITU-T Recommendation M. 1530 (1999): “Network maintenance information“ ETSI EN 300 820-3 (VO. i): “Telecommunications Management Network (TM
31、N); Asynchronous Transfer Mode (ATM) management information model for the X interface between Operation Systems (0%) of a Virtual Path (VP)/Virtual Channel (VC) cross connected networks; Part 3: VP Performance management“. ITU-T Recommendation D.224: “Charging and Accounting principles for ATM/B-ISD
32、N“. ITU-T Recommendation D.285 (1996): “Guiding principles for charging and accounting for intelligent network supported services“. ITU-T Recommendation D.232 (1997): “Specific tariff and accounting principles applicable to ISDN supplementary services“. ITU-T Recommendation D.230 (1995): “General ch
33、arging and accounting principles for supplementary services associated with international telecommunication services provided over the Integrated Services Digital Network (ISDN)“. ITU-T Recommendation D.225 (1997): “Charging and accounting principles to be applied to frame relay data transmission se
34、rvice“. ITU-T Recommendation D.212 (1996): “Charging and accounting principles for the use of Signalling System No. 7“. ITU-T Recommendation D.211 (1998): “International accounting for the use of the signal transfer point and/or signalling point for relay in Signalling System No.7“. ITU-T Recommenda
35、tion D.210 (1994): “General charging and accounting principles for international telecommunications services over the integrated services digital network (ISDN)“. ETSI 7 ETSI TS 1 O1 674-2 V1.l.l (2000-05) ITU-T Recommendation Q.8 13 (1998): “Security Transformation Application Service Element for R
36、emote Operations Service Element (STASE-ROSE)“. ETSI EN 300 820-2 (Vi .2): “Telecommunications Management Network (TMN); Asynchronous Transfer Mode (ATM) Management information model for the X-type interface between Operation Systems (0%) of a Virtual Path (VP)Nirtual Channel (VC) cross connected ne
37、twork; Part 2: VP alarm management“. 3 3.1 Definitions and abbreviations Definitions For the purposes of the present document, the following terms and definitions apply. ATM Access Point: means by which a subnetwork offers external interfaces to other subnetworks. It is associated with an end point
38、of an IPPL ATM Gateway: represents an ATM access point in one subnetwork, which is associated with an ATM access point in another subnetwork for the purpose of topological interconnection connection: ATM cell transport entity, which is capable of transferring information transparently between connec
39、tion points. A connection defines the association between the connection points and the connection points delimit the connection Connection Admission Control (CAC): set of actions taken by the network at the connection set up phase (or during connection re-negotiation phase) in order to establish wh
40、ether a virtual channel connection or a virtual path connection can be accepted or rejected Data Communications Network (DCN): dedicated network used to interconnect operators network management platforms supporting automated X.easi interface processes. (The DCN may be configured as a “closed user g
41、roup“ among these operators management platforms) Inter-PNO Physical Link (LPPL): represents a physical link that offers bi-directional transmission capabilities and connects two subnetworks. Each InterPNOPhysicalLink is terminated by two ATM Access Points, which are in charge of notifying failures
42、related to the link or to the access point itself. An IPPL can be realized by any transmission capability (SDH, PDH etc.) link: “topological component“ which describes the fixed relationship between a “sub-network“ and another “sub-network“ or “access group“. It is defined by an access point on one
43、subnetwork, which is associated with an access point on another subnetwork NNLeasi interface: network to network interface in the User and Control Planes, specified in ETSI TS 101 674-1 2 subnetwork “topological component“ of a network used to effect routing and management. subnetwork connection: su
44、bnetwork connection is capable of transferring information transparently across a subnetwork. It is delimited by connection termination points at the boundary of the subnetwork and represents the association between these connection points. It can be a VP or a VC connection Trouble Ticket: report us
45、ed to exchange information about the resolution of faults, degradations or provisioning problems between operators. Refer also to ITU-T Recommendation X.790 18 for a definition of Trouble Management and Trouble Reporting Virtual Channel Connection (VCC): ATM cell transport entity formed by a series
46、of connections between the end- points. A Virtual Channel Connection is contained in a Virtual Path Connection. However, over the management interface, this containment need not always be visible Virtual Path Connection (VPC): ATM cell transport entity formed by a series of connections between the e
47、nd-points. A Virtual Path Connection can contain one or more Virtual Channel Connections. However, over the management interface, this containment need not always be visible ETSI 8 ETSI TS 1 O1 674-2 V1.l.l (2000-05) 3.2 Abbreviations For the purposes of the present document, the following abbreviat
48、ions apply: AESA AM ATC ATM CAC CCR CM CP CPE CPN CUG DCN EASI (or easi) EN ETS ETSI EURESCOM FM ID IPPL IPR ISA ISD ISE IS0 ITU-T MBS MCR NM NNI NNI . easi NSAP os os1 oss PCR PM PNO POI QOS SCR SPC ss7 STASE-ROSE svc TMN UNI VA-SP vc vcc VP VPC X.easi X.user B-ISDN ATM Forum End System Addresses A
49、ccounting Management ATM Transfer Capability Asynchronous Transfer Mode Broadband - Iritegrated Services Digital Network Connection Admission Control Chargeable Cell Rate Configuration Management Connectivity Provider Customer Premises Equipment Customer Private Network Closed User Group Data Communications Network ETSI project ATM Services Interoperability European Norm European Telecommunications Standard European Telecommunications Standards Institute European Institute for Research and Strategic Studies in Telecommunications Fault Management Identity Inte
