1、 ETSI TS 102 256 V1.1.1 (2003-08)Technical Specification Private Integrated Services Network (PISN);Specification, functional model and information flows;Make Call Request supplementary serviceETSI ETSI TS 102 256 V1.1.1 (2003-08) 2 Reference DTS/ECMA-00231 Keywords PISN, stage 1, stage 2, supplemen
2、tary service ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present d
3、ocument can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existing or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of di
4、spute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other
5、 ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, send your comment to: editoretsi.org Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend
6、to reproduction in all media. European Telecommunications Standards Institute 2003. All rights reserved. DECTTM, PLUGTESTSTM and UMTSTM are Trade Marks of ETSI registered for the benefit of its Members. TIPHONTMand the TIPHON logo are Trade Marks currently being registered by ETSI for the benefit of
7、 its Members. 3GPPTM is a Trade Mark of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. ETSI ETSI TS 102 256 V1.1.1 (2003-08) 3 Contents Intellectual Property Rights5 Foreword.5 Brief History.5 1 Scope 6 2 Conformance 6 3 References (normative) 6 4 Definitions
8、7 4.1 External definitions 7 4.2 Other definitions.7 4.2.1 Co-operating User.7 4.2.2 Destination User .7 4.2.3 Make Call Request7 4.2.4 Original Call .7 4.2.5 Requested Call 7 4.2.6 Requesting User8 5 List of acronyms.8 6 SS-MCR stage 1 specification9 6.1 Description .9 6.1.1 General description.9 6
9、.1.2 Qualifications on applicability to telecommunication services.9 6.2 Procedures 9 6.2.1 Provision / withdrawal 9 6.2.2 Normal procedures9 6.2.2.1 Activation, deactivation and interrogation 9 6.2.2.2 Invocation and operation.9 6.2.3 Exceptional procedures.10 6.2.3.1 Activation, deactivation and i
10、nterrogation 10 6.2.3.2 Invocation and operation.10 6.3 Interactions with other Supplementary Services / Additional Network Features.10 6.3.1 Calling Line Identification Presentation (SS-CLIP) .10 6.3.2 Connected Line Identification Presentation (SS-COLP) 10 6.3.3 Calling/Connected Line Identificati
11、on Restriction (SS-CLIR).10 6.3.4 Calling Name Identification Presentation (SS-CNIP).10 6.3.5 Calling/Connected Name Identification Restriction (SS-CNIR) 10 6.3.6 Connected Name Identification Presentation (SS-CONP)11 6.3.7 Call Forwarding Unconditional (SS-CFU) .11 6.3.8 Call Forwarding Busy (SS-CF
12、B)11 6.3.9 Call Forwarding No Reply (SS-CFNR)11 6.3.10 Call Deflection (SS-CD).11 6.3.11 Path Replacement (ANF-PR)11 6.3.12 Call Transfer (SS-CT).11 6.3.13 Completion of Calls to Busy Subscribers (SS-CCBS)11 6.3.14 Completion of Calls on No Reply (SS-CCNR).11 6.3.15 Call Offer (SS-CO) .11 6.3.16 Do
13、Not Disturb (SS-DND) .12 6.3.17 Do Not Disturb Override (SS-DNDO)12 6.3.18 Call Intrusion (SS-CI).12 6.3.19 Advice of Charge (SS-AOC) 12 6.3.20 Recall (SS-RE)12 6.3.21 Call Interception (SS-CINT).12 6.3.22 Transit Counter (ANF-TC) .12 6.3.23 Route Restriction Class (ANF-RRC)12 ETSI ETSI TS 102 256 V
14、1.1.1 (2003-08) 4 6.3.24 Message Waiting Indication (SS-MWI) .12 6.3.25 Wireless Terminal Location Registration (SS-WTLR).12 6.3.26 Wireless Terminal Incoming Call (SS-WTMI).12 6.3.27 Wireless Terminal Outgoing Call (SS-WTMO) .12 6.3.28 Wireless Terminal Authentication of a WTM User (SS-WTAT) .12 6.
15、3.29 Wireless Terminal Authentication of the PISN (SS-WTAN) .13 6.3.30 Common Information (SS-CMN).13 6.3.31 Call Priority Interruption (Protection) (SS-CPI(P) 13 6.3.32 Private User Mobility Incoming Call (ANF-PUMI).13 6.3.33 Private User Mobility Outgoing Call (ANF-PUMO)13 6.3.34 Private User Mobi
16、lity Registration (SS-PUMR).13 6.3.35 Single Step Call Transfer (SS-SSCT) .13 6.3.36 Simple Dialog (SS-SD).13 6.3.37 Call Identification and Call Linkage (ANF-CIDL).13 6.3.38 Short Message Service (SS-SMS) 13 6.3.39 Message Centre Monitoring (SS-MCM).13 6.3.40 Mailbox Identification (SS-MID) .13 6.4
17、 Interworking considerations .13 6.5 Overall SDL .14 7 SS-MCR stage 2 specification16 7.1 Functional model16 7.1.1 Functional model description16 7.1.2 Description of Functional Entities 16 7.1.2.1 Requesting Users User Agent, FE1 16 7.1.2.2 Requesting Users Control entity, FE2 17 7.1.2.3 Co-operati
18、ng Users Control entity, FE3 .17 7.1.2.4 Co-operating Users User Agent, FE4 .17 7.1.2.5 Destination Users Control entity, FE517 7.1.2.6 Destination Users User Agent, FE617 7.2 Information flows.18 7.2.1 Definition of information flows18 7.2.1.1 MCR_CallRequest 18 7.2.1.2 MCR_PromptCoop .18 7.2.1.3 M
19、CR_Inform.19 7.2.1.4 MCR_Alerting 19 7.2.2 Relationship of information flows to Basic Call information flows .19 7.2.3 Information flow sequences19 7.2.3.1 Make Call Request procedures of SS-MCR20 7.3 Functional Entity actions20 7.3.1 Functional Entity actions of FE1 20 7.3.2 Functional Entity actio
20、ns of FE2 20 7.3.3 Functional Entity actions of FE3 21 7.3.4 Functional Entity actions of FE4 21 7.3.5 Functional Entity actions of FE5 21 7.3.6 Functional Entity actions of FE6 21 7.4 Functional Entity behaviour .21 7.4.1 Behaviour of FE122 7.4.2 Behaviour of FE223 7.4.3 Behaviour of FE324 7.4.4 Be
21、haviour of FE425 7.4.5 Behaviour of FE525 7.4.6 Behaviour of FE626 7.5 Allocation of Functional Entities to physical equipment26 7.6 Interworking considerations .27 History 28 ETSI ETSI TS 102 256 V1.1.1 (2003-08) 5 Intellectual Property Rights IPRs essential or potentially essential to the present
22、document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respec
23、t of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/webapp.etsi.org/IPR/home.asp). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the e
24、xistence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has been produced by ECMA on behalf of its members and those of the European Telecommuni
25、cations Standards Institute (ETSI). Brief History The present document is one of a series of ECMA Standards defining services and signalling protocols applicable to Private Integrated Services Networks (PISNs). The series uses ISDN concepts as developed by ITU-T and conforms to the framework of Inte
26、rnational Standards for Open Systems Interconnection as defined by ISO/IEC. It has been produced under ETSI work item DTS/ECMA-00231. The present document specifies the Make Call Request supplementary service. The present document is based upon the practical experience of ECMA member companies and t
27、he results of their active and continuous participation in the work of ISO/IEC JTC1, ITU-T, ETSI and other international and national standardization bodies. It represents a pragmatic and widely based consensus. ETSI ETSI TS 102 256 V1.1.1 (2003-08) 6 1 Scope The present document specifies Supplemen
28、tary Service Make Call Request (SS-MCR), which is related, but not limited, to various basic services supported by Private Integrated Services Networks (PISNs). Basic services are specified in ECMA-142 2. The supplementary service MCR enables a Requesting User to request a Co-operating User to estab
29、lish a new Requested Call to a Destination User. This new Requested Call between the Co-operating and Destination User can be either a Basic call or call independent signalling connection. Service specifications are produced in three stages, according to the method described in ETS 300 387 4. The pr
30、esent document contains the stage 1 and stage 2 specifications of SS-MCR. The stage 1 specification (clause 6) specifies the supplementary service as seen by users of PISNs. The stage 2 specification (clause 7) specifies the functional entities involved in the supplementary service and the informati
31、on flows between them. 2 Conformance In order to conform to the present document, a stage 3 standard shall specify signalling protocols and equipment behaviour that are capable of being used in a PISN which supports the supplementary service specified in the present document. This means that, to cla
32、im conformance, a stage 3 standard is required to be adequate for the support of those aspects of clause 6 (stage 1) and clause 7 (stage 2) which are relevant to the interface or equipment to which the stage 3 standard applies. 3 References (normative) The following standards contain provisions, whi
33、ch, through reference in this text, constitute provisions of the present document. All standards are subject to revision, and parties to agreements based on the present document are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. In th
34、e case of references to ECMA Standards that are aligned with ISO/IEC International Standards, the number of the appropriate ISO/IEC International Standard is given in brackets after the ECMA reference. 1 ECMA-133: “Private Integrated Services Network (PISN) - Reference Configuration for PISN Exchang
35、es (PINX) (International Standard ISO/IEC 11579-1)“. 2 ECMA-142: “Private Integrated Services Network (PISN) - Circuit Mode 64kbit/s Bearer Services - Service Description, Functional Capabilities and Information Flows (BCSD) (International Standard ISO/IEC 11574)“. 3 ECMA-165: “Private Integrated Se
36、rvices Network (PISN) - Generic Functional Protocol for the Support of Supplementary Services - Inter-Exchange Signalling Procedures and Protocol (QSIG-GF) (International Standard ISO/IEC 11582)“. 4 ETSI ETS 300 387: “Private Telecommunication Network (PTN); Method for the specification of basic and
37、 supplementary services“. 5 ITU-T Recommendation I.112: “Vocabulary of terms for ISDNs“. 6 ITU-T Recommendation I.210: “Principles of telecommunication services supported by an ISDN and the means to describe them“. 7 ITU-T Recommendation Z.100: “Specification and Description Language (SDL)“. ETSI ET
38、SI TS 102 256 V1.1.1 (2003-08) 7 4 Definitions For the purposes of the present document, the following terms and definitions apply. 4.1 External definitions For the purposes of the present document the following terms and definitions given in other documents apply: basic service: See ECMA-142 2. cal
39、l, basic call: See ECMA-165 3. Call Independent Signalling Connection (CISC): See ECMA-165 3. call independent: See ECMA-165 3. call related: See ECMA-165 3. Private Integrated services Network eXchange (PINX): See ECMA-133 1. Private Integrated Services Network (PISN): See ECMA-133 1. service: See
40、ITU-T Recommendation I.112 5. signalling: See ITU-T Recommendation I.112 5. Supplementary Service (SS): See ITU-T Recommendation I.210 6. user: See ECMA-142 2. 4.2 Other definitions 4.2.1 Co-operating User The user who receives a Make Call Request and who shall set up a new Requested Call to the Des
41、tination User. 4.2.2 Destination User The called user of the Requested Call i.e. the user to whom the Co-operating User shall establish a Requested Call. 4.2.3 Make Call Request A request from the Requesting User for a new call (i.e. Requested Call) between a Co-operating User and a Destination User
42、. 4.2.4 Original Call The call between the Requesting User and the Co-operating User. The Original Call can be either a Basic call or a call independent signalling connection and is correlated with the Requested Call. 4.2.5 Requested Call The call between the Co-operating User and the Destination Us
43、er that is established by the Co-operating User due to a Make Call Request from the Requesting User. The Requested Call can either be a Basic call (with a specific Basic Service) or a call independent signalling connection and is correlated with the Original Call. ETSI ETSI TS 102 256 V1.1.1 (2003-0
44、8) 8 4.2.6 Requesting User The User who sends a Make Call Request to the Co-operating User with the request to establish a specific Requested Call to the Destination User. 5 List of acronyms For the purposes of the present document the following acronyms apply: ANF Additional Network Feature ANF-PR
45、Path Replacement ANF-PUMI Private User Mobility Incoming Call ANF-PUMO Private User Mobility Outgoing Call ANF-RRC Route Restriction Class ANF-TC Transit Counter CISC Call Independent Signalling Connection FE Functional Entity ISDN Integrated Services Digital Network MC Message Centre MCR Make Call
46、Request PINX Private Integrated services Network eXchange PISN Private Integrated Services Network SDL Specification and Description Language SS Supplementary Service SS-AOC Advice of Charge SS-CCBS Completion of Calls to Busy Subscribers SS-CCNR Completion of Calls on No Reply SS-CD Call Deflection
47、 SS-CFB Call Forwarding Busy SS-CFNR Call Forwarding No Reply SS-CFU Call Forwarding Unconditional SS-CI Call Intrusion SS-CINT Call INTerception SS-CLIP Calling Line Identification Presentation SS-CLIR Calling/Connected Line Identification Restriction SS-CMN Common Information SS-CNIP Calling Name
48、Identification Presentation SS-CNIR Calling/Connected Name Identification Restriction SS-CO Call Offer SS-COLP Connected Line Identification Presentation SS-CONP Connected Name Identification Presentation SS-CPI(P) Call Priority Interruption (Protection) SS-CT Call Transfer SS-DND Do Not Disturb SS-
49、DNDO Do Not Disturb Override SS-MCM Message Centre Monitoring SS-MID Mailbox Identification SS-MWI Message Waiting Indication SS-PUMR Private User Mobility Registration SS-RE REcall SS-SD Simple Dialog SS-SMS Short Message Service SS-SSCT Single Step Call Transfer SS-WTAN Wireless Terminal Authentication of the PISN SS-WTAT Wireless Terminal Authentication of a WTM User SS-WTLR Wireless Terminal Location Registration SS-WTMI Wireless Terminal Incoming Call SS-WTMO Wireless Terminal Outgoing Call ETSI ETSI TS 102 256 V1.1.1 (2003-08)
