1、 ETSI TS 102 744-3-5 V1.1.1 (2015-10) Satellite Earth Stations and Systems (SES); Family SL Satellite Radio Interface (Release 1); Part 3: Control Plane and User Plane Specifications; Sub-part 5: Adaptation Layer Interface floppy3TECHNICAL SPECIFICATION ETSI ETSI TS 102 744-3-5 V1.1.1 (2015-10) 2 Re
2、ference DTS/SES-00299-3-5 Keywords 3GPP, GPRS, GSM, GSO, interface, MSS, radio, satellite, TDM, TDMA, UMTS ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif enregistre
3、la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the present document
4、shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network drive within ET
5、SI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, pl
6、ease send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as authorized by written pe
7、rmission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2015. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand
8、 the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and owned by the GSM Association. ETSI ETSI TS 1
9、02 744-3-5 V1.1.1 (2015-10) 3 Contents Intellectual Property Rights 6g3Foreword . 6g3Modal verbs terminology 6g3Introduction 6g31 Scope 7g32 References 7g32.1 Normative references . 7g32.2 Informative references 7g33 Symbols and abbreviations . 8g33.1 Symbols 8g33.2 Abbreviations . 8g34 Adaptation L
10、ayer Interface . 8g34.1 Radio Interface Layering 8g34.2 Conventions used in the present document 9g34.2.1 Presentation. 9g34.2.2 “Reserved“ Fields and Values . 9g34.2.3 Boolean Variables . 10g34.2.4 ASN.1 Encoding Rules . 10g35 Adaptation Layer 10g35.1 Overview 10g35.1.1 Responsibilities . 10g35.2 A
11、daptation Layer use of lower layer Service Access Points 10g36 Adaptation Layer Protocol Data Units . 11g36.0 General . 11g36.1 Common Signalling Protocol Data Units (ALComPDUs) . 11g36.1.0 General 11g36.1.1 PagingType1 . 12g36.1.1.0 General 12g36.1.1.1 CNDomainIdentity 12g36.1.1.2 PagingCause 12g36
12、.1.2 Register . 13g36.1.2.0 General 13g36.1.2.1 RegistrationReference . 13g36.1.2.2 RIVersion 13g36.1.2.3 RegistrationCause . 14g36.1.2.4 UEClass . 14g36.1.3 RegisterAck 14g36.1.3.0 General 14g36.1.3.1 BcnID 15g36.1.3.2 BcnType 15g36.1.3.3 NumParam 15g36.1.3.4 BcnParamList 16g36.1.3.5 CtrlFlags 16g3
13、6.1.3.6 BctType . 16g36.1.3.7 BctID . 16g36.1.3.8 BCtEPDU 17g36.1.3.9 RegistrationMode 17g36.1.4 RegisterRej . 17g36.1.4.0 General 17g36.1.4.1 RejectionCause and ProtocolErrorCause 18g36.1.5 DeregisterCommon . 18g36.1.5.0 General 18g36.1.5.1 DeregistrationCause and ProtocolErrorCause . 19g3ETSI ETSI
14、 TS 102 744-3-5 V1.1.1 (2015-10) 4 6.2 UE-Specific Signalling Protocol Data Units (ALSignallingPDUs) 19g36.2.0 General 19g36.2.1 ALSignallingPDUStructure 19g36.2.1.0 General 19g36.2.1.1 ALSignalType . 21g36.2.1.2 IntegrityCheckIncluded . 22g36.2.1.3 ALProtocolDiscriminator 22g36.2.1.4 ALMsgSeqNumber
15、 . 22g36.2.1.5 Message . 22g36.2.1.6 MACIntegrity 22g36.2.2 Establish 22g36.2.2.0 General 22g36.2.2.1 BcnType 23g36.2.2.2 TransactionID 24g36.2.3 EstablishAck . 24g36.2.3.0 General 24g36.2.3.1 AdaptationLayerAVPList . 24g36.2.4 Release 25g36.2.4.0 General 25g36.2.4.1 ReleaseCause 25g36.2.5 ReleaseAc
16、k . 26g36.2.6 Modify 26g36.2.7 ModifyAck 27g36.2.8 Handover 28g36.2.9 HandoverAck 28g36.2.10 RegisterComplete . 28g36.2.10.0 General 28g36.2.10.1 StartValue 29g36.2.10.2 UERadioAccessCapability 29g36.2.10.2.0 General 29g36.2.10.2.1 PDCPCapability and LongPDCPCapability 30g36.2.10.2.2 SecurityCapabil
17、ity . 32g36.2.10.2.3 Capability Extension . 32g36.2.11 EstablishReject . 36g36.2.11.0 General 36g36.2.11.1 FailureCause and ProtocolErrorCause 37g36.2.12 ReleaseReject 37g36.2.13 ModifyReject 38g36.2.14 PagingType2 . 38g36.2.14.0 General 38g36.2.14.1 PagingRecordTypeID 39g36.2.15 InitialDirectTransf
18、er . 39g36.2.15.0 General 39g36.2.15.1 NASMessage . 40g36.2.16 UplinkDirectTransfer 40g36.2.17 DownlinkDirectTransfer . 41g36.2.18 SecurityModeCommand . 41g36.2.19 SecurityModeComplete 42g36.2.20 SecurityModeFailure 43g36.2.20.0 General 43g36.2.20.1 SecurityFailureCause 43g36.2.21 SignallingConnecti
19、onReleaseReq . 44g36.2.21.0 General 44g36.2.21.1 ConnectionReleaseCause 44g36.2.22 SignallingConnectionRelease . 44g36.2.23 UEPositionRequest . 45g36.2.24 UEPositionResponse . 46g36.2.24.0 General 46g36.2.24.1 Ue-position 46g36.2.25 RegModeUpdate . 48g36.2.26 SystemInformation 48g36.2.27 Deregister
20、48g3ETSI ETSI TS 102 744-3-5 V1.1.1 (2015-10) 5 6.2.28 DeregisterAck . 49g36.2.29 HandoverRequest 49g36.3 Adaptation Layer AVPs . 50g36.3.0 General 50g36.3.1 AdaptationLayerAVP Structure 51g36.3.2 ALShortAVP 51g36.3.2.0 General 51g36.3.2.1 ALShortAVPType 52g36.3.3 ALStandardAVP . 52g36.3.3.0 General
21、 52g36.3.3.1 ALStandardAVPType . 53g36.3.4 CountCActivationTimeParam (ShortAVPType 0x01) . 53g36.3.5 PDCPSNInfoParam (ShortAVPType 0x02) . 54g36.3.6 RABInfoParam (ShortAVPType 0x03) 54g36.3.6.0 General 54g36.3.6.1 TrafficHandlingPriority . 55g36.3.6.2 RabAccessPriority . 56g36.3.7 ULCipheringActivat
22、ionTimeInfoParam (ShortAVPType 0x04) 56g36.3.8 ULIntegrityProtectionActivationInfoParam (ShortAVPType 0x07) 56g36.3.9 CipheringModeInfoParam (Short/StandardAVPType 0x08) 57g36.3.9.0 General 57g36.3.9.1 CipheringModeCommand . 58g36.3.9.2 RBActivationTimeInfoList . 58g36.3.10 IntegrityProtectionModeIn
23、foParam (ShortAVPType 0x0A) 59g36.3.11 PDCPInfoParam (Short/StandardAVPType0x0C) . 60g36.3.11.0 General 60g36.3.11.1 RFC2507Info 61g36.3.11.2 RFC3095Info 63g36.3.11.2.0 General 63g36.3.11.2.1 UplinkROHCData . 64g36.3.11.2.2 DownlinkROHCData 65g36.3.12 CSCallTypeParam (ParamType 0x05) 66g36.3.13 Grou
24、pCipherInfoParam (StandardAVPType 0x0D) . 66g36.4 Connection Layer AVP 66g36.4.0 General 66g36.4.1 BCn-AVP Structure 67g36.4.1.0 General 67g36.4.1.1 PrmLen 68g36.4.1.2 PrmLenType 68g36.4.2 ResponseTimeParam (ParamType 0x08) 68g36.4.3 MaxIdleTimeParam (ParamType 0x09) . 69g36.4.4 MaxConnectionTimePar
25、am (ParamType 0x11) . 69g36.4.5 TxWindowSizeParam (ParamType 0x21) 69g36.4.6 TxBufferSizeParam (ParamType 0x29) 69g36.4.7 AdaptationLayerAVPListLengthParam (ParamType 0xF8) . 69g36.4.8 CSHConfigurationParam (ParamType 0x30) . 69g3Annex A (normative): ASN.1 71g3History 72g3ETSI ETSI TS 102 744-3-5 V1
26、.1.1 (2015-10) 6 Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Inte
27、llectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy, no investigation, includ
28、ing IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Technical Specification (TS) has
29、 been produced by ETSI Technical Committee Satellite Earth Stations and Systems (SES). The present document is part 3, sub-part 5 of a multi-part deliverable. Full details of the entire series can be found in ETSI TS 102 744-1-1 i.4. Modal verbs terminology In the present document “shall“, “shall no
30、t“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ are NOT allowed in ETSI deliverables except when used in direct cit
31、ation. Introduction This multi-part deliverable (Release 1) defines a satellite radio interface that provides UMTS services to users of mobile terminals via geostationary (GEO) satellites in the frequency range 1 518,000 MHz to 1 559,000 MHz (downlink) and 1 626,500 MHz to 1 660,500 MHz and 1 668,00
32、0 MHz to 1 675,000 MHz (uplink). ETSI ETSI TS 102 744-3-5 V1.1.1 (2015-10) 7 1 Scope The present document defines the Adaptation Layer (AL) peer-to-peer interface of the Family SL satellite radio interface between the Radio Network Controller (RNC) and the User Equipment (UE) used in the satellite n
33、etwork. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document
34、 (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their lon
35、g term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI TS 133 102: “Universal Mobile Telecommunications System (UMTS); 3G security; Security architecture (3GPP TS 33.102 Release 4)“. 2 ETSI TS 133 105: “Universal Mobile Telecommunication
36、s System (UMTS); Cryptographic algorithm requirements (3GPP TS 33.105 Release 4)“. 3 ETSI TS 125 331: “Universal Mobile Telecommunications System (UMTS); Radio Resource Control (RRC) protocol specification (3GPP TS 25.331 Release 4)“. 4 ETSI TS 102 744-1-4: “Satellite Earth Stations and Systems (SES
37、); Family SL Satellite Radio Interface (Release 1); Part 1: General Specifications; Sub-part 4: Applicable External Specifications, Symbols and Abbreviations“. 5 ETSI TS 102 744-2-2: “Satellite Earth Stations and Systems (SES); Family SL Satellite Radio Interface (Release 1); Part 2: Physical Layer
38、Specifications; Sub-part 2: Radio Transmission and Reception“. 6 ETSI TS 102 744-3-1: “Satellite Earth Stations and Systems (SES); Family SL Satellite Radio Interface (Release 1); Part 3: Control Plane and User Plane Specifications; Sub-part 1: Bearer Control Layer Interface“. 7 ETSI TS 102 744-3-4:
39、 “Satellite Earth Stations and Systems (SES); Family SL Satellite Radio Interface (Release 1); Part 3: Control Plane and User Plane Specifications; Sub-part 4: Bearer Connection Layer Operation“. 8 ETSI TS 102 744-3-6: “Satellite Earth Stations and Systems (SES); Family SL Satellite Radio Interface
40、(Release 1); Part 3: Control Plane and User Plane Specifications; Sub-part 6: Adaptation Layer Operation“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cited ve
41、rsion applies. For non-specific references, the latest version of the reference document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. ETSI ETSI TS 102 744-3-5 V1.1.1 (2015
42、-10) 8 The following referenced documents are not necessary for the application of the present document but they assist the user with regard to a particular subject area. i.1 NMEA 0183 Interface Standard, Version 3.01, National Marine Electronics Association, January 2002. i.2 IETF RFC 2507 (1999):
43、“IP Header Compression“, M. Degermark, B. Nordgren, S. Pink. i.3 IETF RFC 3095 (2001): “Robust Header Compression (ROHC): Framework and four profiles: RTP, UDP, ESP, and uncompressed“, C. Bormann, C. Burmeister, M. Degermark, H. Fukushima, H. Hannu, L-E. Jonsson, R. Hakenberg, T. Koren, K. Le, Z. Li
44、u, A. Martensson, A. Miyazaki, K. Svanbro, T. Wiebke, T. Yoshimura, H. Zheng. i.4 ETSI TS 102 744-1-1: “Satellite Earth Stations and Systems (SES); Family SL Satellite Radio Interface (Release 1); Part 1: General Specifications; Sub-part 1: Services and Architectures“. 3 Symbols and abbreviations 3.
45、1 Symbols For the purposes of the present document, the symbols given in ETSI TS 102 744-1-4 4, clause 3 apply. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ETSI TS 102 744-1-4 4, clause 3 apply. 4 Adaptation Layer Interface 4.1 Radio Interface Layering The
46、satellite communication protocol is considered as a number of communication layers, as follows: Adaptation Layer (AL); Bearer Connection Layer (BCn); and Bearer Control Layer (BCt); Physical Layer (L1). The satellite radio interface protocol stack is designed to seamlessly integrate with UMTS Non-Ac
47、cess Stratum entities, such as GPRS Mobility Management (GMM) and Mobility Management (MM), residing in the Core Network (CN) and in the upper layers of the User Equipment (UE). The Adaptation Layer provides support to the UMTS Non-Access Stratum entities GMM and MM, and uses the services provided b
48、y the Bearer Connection Layer, as shown in Figure 4.1. The present document defines the Adaptation Layer peer-to-peer interface between the Radio Network Controller (RNC) and the UE, as shown in Figure 4.1. ETSI ETSI TS 102 744-3-5 V1.1.1 (2015-10) 9 Figure 4.1: Control Plane Protocol Stack Layering
49、 with Adaptation Layer peer-to-peer interface indicated 4.2 Conventions used in the present document 4.2.1 Presentation The following conventions are applied throughout the present document: In the ASN.1, variable names are always in lower case letters with hyphenation used to improve readability (e.g. ret-bct-pdu-header). Data Types in the ASN1. Always start with an upper case letter and may contain additional upper case letters to improve readability (e.g. ReturnBCtPDUHeader). In the explanatory text these variables are referred to
