1、 ETSI TS 102 891-3 V3.1.1 (2012-01) IMS Network Testing (INT); Message Waiting Indication (MWI) using IP Multimedia (IM) Core Network (CN) subsystem; Conformance Testing; Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specificatio
2、n floppy3Technical Specification ETSI ETSI TS 102 891-3 V3.1.1 (2012-01)2Reference DTS/INT-00023-3 Keywords ATS, IMS, MWI, PIXIT, SIP, testing, TTCN ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742
3、C Association but non lucratif enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice Individual copies of the present document can be downloaded from: http:/www.etsi.org The present document may be made available in more than one electronic version or in print. In any case of existi
4、ng or perceived difference in contents between such versions, the reference version is the Portable Document Format (PDF). In case of dispute, the reference shall be the printing on ETSI printers of the PDF version kept on a specific network drive within ETSI Secretariat. Users of the present docume
5、nt should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at http:/portal.etsi.org/tb/status/status.asp If you find errors in the present document, please send your comment to one of the follow
6、ing services: http:/portal.etsi.org/chaircor/ETSI_support.asp Copyright Notification No part may be reproduced except as authorized by written permission. The copyright and the foregoing restriction extend to reproduction in all media. European Telecommunications Standards Institute 2012. All rights
7、 reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are Trade Marks of ETSI registered for the benefit of its Members. 3GPPTM and LTETMare Trade Marks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. GSM and the GSM logo are Trade Marks registered and ow
8、ned by the GSM Association. ETSI ETSI TS 102 891-3 V3.1.1 (2012-01)3Contents Intellectual Property Rights 4g3Foreword . 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviations . 6g34 Abstract
9、Test Method (ATM) . 6g34.1 Configurations for testing UE 6g35 The ATS development process . 7g35.1 Requirements and Test Purposes 7g35.2 ATS structure . 7g35.2.1 Test case grouping 7g35.2.2 Test case identifiers 7g35.3 ATS specification framework . 8g35.3.1 ATS Library 8g35.3.2 Use of TTCN-3 . 9g3An
10、nex A (normative): Partial PIXIT proforma 10g3A.1 Introduction 10g3A.2 PIXIT items 10g3A.2.1 PIXIT for UE Testing . 11g3A.2.2 PIXIT for AS Testing . 11g3A.2.3 General PIXIT 12g3A.2.4 MWI specific PIXIT . 12g3Annex B (informative): TTCN-3 library modules . 13g3B.1 Electronic annex, zip file with TTCN
11、-3 code 13g3Annex C (informative): Validation Report 14g3C.1 Test Suite Validation Level 14g3C.2 TTCN-3 Edition . 14g3C.3 TTCN-3 Tool(s) . 14g3C.3.1 TTCN-3 Tool Elvior TestCast14g3C.3.1.1 Identification of the TTCN-3 Tool Elvior TestCast14g3C.3.1.2 Compilation status 14g3C.3.2 TTCN-3 Tool EricssonTi
12、tan 14g3C.3.2.1 Identification of the TTCN-3 Tool EricssonTitan . 14g3C.3.2.2 Compilation status 14g3C.3.3 TTCN-3 Tool Testing Technologies TTWorkbench15g3C.3.3.1 Identification of the TTCN-3 Tool Testing Technologies TTWorkbench15g3C.3.3.2 Compilation status 15g3C.3.4 Test Platform(s) 15g3History 1
13、6g3ETSI ETSI TS 102 891-3 V3.1.1 (2012-01)4Intellectual Property Rights IPRs essential or potentially essential to the present document may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found
14、 in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (http:/ipr.etsi.org). Pursuant to the ETSI IPR Policy
15、, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to the existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Foreword This Techni
16、cal Specification (TS) has been produced by ETSI Technical Committee IMS Network Testing (INT). The present document is part 3 of a multi-part deliverable covering Message Waiting Indication (MWI), as identified below: Part 1: “Protocol Implementation Conformance Statement (PICS)“; Part 2: “Test Sui
17、te Structure and Test Purposes (TSS Part 3: “Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification“. ETSI ETSI TS 102 891-3 V3.1.1 (2012-01)51 Scope The present document specifies the Abstract Test Suite (ATS) and partial Protocol
18、Implementation eXtra Information for Testing (PIXIT) proforma based on the Test Suite Structure and Test Purposes defined in TS 102 891-2 2. The test notation used in the ATS is TTCN-3 (see ES 201 873-1 7). The following test specification- and design considerations can be found in the body of the p
19、resent document: the overall test suite structure; the testing architecture; the test methods and port definitions; the test configurations; the design principles, assumptions, and used interfaces to the TTCN3 tester (System Simulator); TTCN styles and conventions; the partial PIXIT proforma; the mo
20、dules containing the TTCN-3 ATS. Annex A provides the Partial Implementation Extra Information for Testing (PIXIT) Proforma of the ATS. Annex B provides the Testing and Test Control Notation (TTCN-3) part of the ATS. 2 References References are either specific (identified by date of publication and/
21、or edition number or version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the reference document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expect
22、ed location might be found at http:/docbox.etsi.org/Reference. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. 2.1 Normative references The following referenced documents are necessary for the application of th
23、e present document. 1 ETSI TS 124 606: “Digital cellular telecommunications system (Phase 2+); Universal Mobile Telecommunications System (UMTS); LTE; Message Waiting Indication (MWI)using IP Multimedia (IM) Core Network (CN) subsystem; Protocol specification (3GPP TS 24.606 version 8.2.0 Release 8)
24、“. 2 ETSI TS 102 891-2 (V3.2.1): “Technical Committee for IMS Network Testing (INT); Message Waiting Indication (MWI) using IP Multimedia (IM) Core Network (CN) subsystem; Part 2: Test Suite Structure and Test Purposes (TSS Network Integration Testing; IMS specific use of Session Initiation Protocol
25、 (SIP) and Session Description Protocol (SDP); Conformance Testing; Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) proforma specification“. 4 IETF RFC 3261 (2002): “SIP: Session Initiation Protocol“. ETSI ETSI TS 102 891-3 V3.1.1 (2012-01)
26、65 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 6 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Con
27、formance Statements“. 7 ETSI ES 201 873-1 (V4.3.1): “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language“. 8 ETSI TS 102 351 (V2.1.1): “Methods for Testing and Specification (MTS); Internet Protocol Testing (IPT); IPv6 Testing: M
28、ethodology and Framework“. 9 ETSI TS 102 587-2: “Electromagnetic compatibility and Radio spectrum Matters (ERM); Peer-to-Peer Digital Private Mobile Radio; Part 2: Conformance testing; Test Suite Structure and Test Purposes (TSS they are based on the names provided in clause 4 of TS 102 891-2 2, but
29、 use the naming conventions defined for the ATS (see clause 5.2.2). Table 1: MWI ATS structure UserEquipment MWI_U01_xxx NetworkAS_ServedUser OIP_N01_xxx5.2.2 Test case identifiers The test case names are built up according to the following scheme: “_“_“ where: a) double quotes (“) are used to enclo
30、se literal strings; b) is the group index in Table 1 (which uniquely identifies the path of groups/subgroups); c) is a running 3-digit decimal number, starting in each subgroup path with “001“. ETSI ETSI TS 102 891-3 V3.1.1 (2012-01)8EXAMPLE: TC_MWI_N01_001: i) the identifier has Group index “MWI_N0
31、1“, i.e. it is in the subgroup having complete path: SupplementaryServices_MWI/AS_ServedUser; ii) the identifier is the first test case of this group/subgroup. NOTE: This naming scheme provides a 1-1 correspondence of TP identifiers as defined in TS 102 891-2 2 and test case names. The TP identifier
32、 of TC_MWI_N01_001 is TP MWI_N01_001. 5.3 ATS specification framework 5.3.1 ATS Library For this ATS the TTCN-3 library modules are basically organized as: 1) AtsCommon modules. 2) LibIms modules. 3) LibSip modules (RFC 3261 4). 4) LibCommon modules (taken from an improved version of TS 102 351 8).
33、NOTE: Due to the common LibSip and LibIms library approach with some other parallel running projects there is necessary to create tag version of all library modules. Table 2 shows the organization of the ATS as library of modules. Table 2: Library of modules Module Class Module Id Description MWI MW
34、I_TC_Functions MWI test case functions MWI_TestCases MWI test case definitions AtsCommon SS_Ims_PICS Module Parameter declarations associated with PICS SS_Ims_PIXITS SIP common Module Parameter declarations associated with PIXIT SS_Ims_TestConfiguration Functions which implement the configuration of
35、 the SUT adapter and mapping of test components for establishing and tearing down different test configurations SS_Ims_TestSystem TSI components, test system internal ports SS_Ims_TestCases Test case definitions SS_Ims_Functions Test case functions LibIms LibIms_PIXITS IMS specific common Module Par
36、ameter (e.g. addresses related to SUT components and TS) declarations associated with PIXIT LibIms_Interface IMS component LibIms_SIPTypesAndValues IMS specific user and interface specific profile data (see note) LibIms_Templates Modified templates with IMS specific header fields LibIms_Steps functi
37、ons using IMS specific types ETSI ETSI TS 102 891-3 V3.1.1 (2012-01)9Module Class Module Id Description LibSip LibSip_PIXITS SIP general common Module Parameter (e.g. SDP/SIP procedure options) declarations associated with PIXIT LibSip_Interface SIP component LibSip_SIPTypesAndValues SIP message typ
38、es and constants, simple user profiles (see note) LibSip_SDPTypes SDP types and constants LibSip_Templates Basic and modified templates with SIP specific header fields LibSip_Steps SIP specific behaviour function library LibSip_XMLTypes XML types for SIP tests XSDAUX Basic types used in XML LibCommo
39、n LibCommon_AbstractData Generic data types for a stack and its operations LibCommon_BasicTypesAndValues Basic type and value definitions (integer and Boolean) LibCommon_DataStrings Bit and Octet string types LibCommon_Sync Co-ordination/synchronization of test components LibCommon_TextStrings Basic
40、 character and string types with fixed length LibCommon_Time Time handling functions and module parameter LibCommon_VerdictControl Basic functions for setting of test component verdicts NOTE: In order to build a comprehensive library all SIP message header (incl. IMS specific) have been defined in L
41、ibSip_SIPTypesAndValues only. 5.3.2 Use of TTCN-3 For the purposes of the present document, the description of the use of TTCN-3 described in clause 5.3.2 of TS 102 790-3 3 applies. ETSI ETSI TS 102 891-3 V3.1.1 (2012-01)10Annex A (normative): Partial PIXIT proforma Notwithstanding the provisions of
42、 the copyright clause related to the text of the present document, grants that users of the present document may freely reproduce the PIXIT proforma in this annex so that it can be used for its intended purposes and may further publish the completed PIXIT proforma. A.1 Introduction This partial PIXI
43、T proforma contained in the present document is provided for completion, when the related Abstract Test Suite is to be used against the Implementation Under Test (IUT). The completed partial PIXIT will normally be used in conjunction with the completed PICS, as it adds precision to the information p
44、rovided by the PICS. A.2 PIXIT items According to the type of ATS defined in the present document, the PIXIT are divided in PIXIT items for UE, AS and general PIXIT items that apply for all types of IUT. Each PIXIT item corresponds to a Module Parameter of the ATS. NOTE: The PIXIT definitions are pa
45、rt of a SIP TTCN-3 library that contains additional PIXIT definitions that are not used in this ATS and are therefore not presented in the following tables. ETSI ETSI TS 102 891-3 V3.1.1 (2012-01)11A.2.1 PIXIT for UE Testing Table A.1: PIXIT items for UE testing Id Identifier Type / Description 1 PX
46、_IMS_TS_PCSCF_IPADDR charstring, for TS/P-CSCF IP address to exchange SIP messages. 2 PX_IMS_TS_PCSCF_PORT integer, for IUT/P-CSCF port number to exchange SIP messages. 3 PX_IMS_TS_UE1_IPADDR charstring, for IP address used by the UE1 to exchange SIP messages. 4 PX_IMS_TS_UE1_PORT integer, for port
47、number used by the UE1 to exchange SIP messages. 5 PX_IMS_SUT_UE1_BEARER_IPADDR charstring, for IP address used by the TS to exchange media streams for UE1. 6 PX_IMS_SUT_UE1_HOME_DOMAIN charstring, for identity of the tester UE1 local domain. 7 PX_IMS_SUT_UE1_PUBLIC_USER charstring, for identity of
48、the tester UE1 local user. 8 PX_IMS_SUT_UE1_PRIVAT_USERNAME charstring, for RFC 2617 10, clause 3.2.2 username of UE1: The name of user in the specified realm. 9 PX_IMS_SUT_UE1_PRIVAT_PASSWD charstring, for RFC 2617 10, clause 3.2.2.2 passwd of UE1: A known shared secret, the password of user of the
49、 specified username. 10 PX_IMS_SUT_UE1_QOP charstring, for RFC 2617 10, clause 3.2.1 qop options of UE1: Quoted string of one or more tokens indicating the “quality of protection“ values supported by the server; the value “auth“ indicates authentication; the value “auth-int“ indicates authentication with integrity protection. 11 PX_IMS_SUT_UE1_REGISTRAR charstring, for home (SUT) REGISTRAR domain of UE1. 12 PX_UE_REGISTRATION boolean, En-/disable UE registration. 13 PX_UE_REG_EVENT_SUBSCRIPTION boolean, En-/disable U
