ETSI TS 103 530-3-2018 Core Network and Interoperability Testing (INT) NAS Conformance Testing for the S1-MME interface (3GPPTM Release 13) Part 3 Abstract Test Suite (ATS) and par.pdf

上传人:visitstep340 文档编号:740157 上传时间:2019-01-11 格式:PDF 页数:14 大小:88.10KB
下载 相关 举报
ETSI TS 103 530-3-2018 Core Network and Interoperability Testing (INT) NAS Conformance Testing for the S1-MME interface (3GPPTM Release 13) Part 3 Abstract Test Suite (ATS) and par.pdf_第1页
第1页 / 共14页
ETSI TS 103 530-3-2018 Core Network and Interoperability Testing (INT) NAS Conformance Testing for the S1-MME interface (3GPPTM Release 13) Part 3 Abstract Test Suite (ATS) and par.pdf_第2页
第2页 / 共14页
ETSI TS 103 530-3-2018 Core Network and Interoperability Testing (INT) NAS Conformance Testing for the S1-MME interface (3GPPTM Release 13) Part 3 Abstract Test Suite (ATS) and par.pdf_第3页
第3页 / 共14页
ETSI TS 103 530-3-2018 Core Network and Interoperability Testing (INT) NAS Conformance Testing for the S1-MME interface (3GPPTM Release 13) Part 3 Abstract Test Suite (ATS) and par.pdf_第4页
第4页 / 共14页
ETSI TS 103 530-3-2018 Core Network and Interoperability Testing (INT) NAS Conformance Testing for the S1-MME interface (3GPPTM Release 13) Part 3 Abstract Test Suite (ATS) and par.pdf_第5页
第5页 / 共14页
点击查看更多>>
资源描述

1、 ETSI TS 103 530-3 V1.1.1 (2018-02) Core Network and Interoperability Testing (INT); NAS Conformance Testing for the S1-MME interface; (3GPPTMRelease 13); Part 3: Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) pro forma specification floppy3TECHNI

2、CAL SPECIFICATION ETSI ETSI TS 103 530-3 V1.1.1 (2018-02)2 Reference DTS/INT-00136-3 Keywords ATS, conformance, PIXIT ETSI 650 Route des Lucioles F-06921 Sophia Antipolis Cedex - FRANCE Tel.: +33 4 92 94 42 00 Fax: +33 4 93 65 47 16 Siret N 348 623 562 00017 - NAF 742 C Association but non lucratif

3、enregistre la Sous-Prfecture de Grasse (06) N 7803/88 Important notice The present document can be downloaded from: http:/www.etsi.org/standards-search The present document may be made available in electronic versions and/or in print. The content of any electronic and/or print versions of the presen

4、t document shall not be modified without the prior written authorization of ETSI. In case of any existing or perceived difference in contents between such versions and/or in print, the only prevailing document is the print of the Portable Document Format (PDF) version kept on a specific network driv

5、e within ETSI Secretariat. Users of the present document should be aware that the document may be subject to revision or change of status. Information on the current status of this and other ETSI documents is available at https:/portal.etsi.org/TB/ETSIDeliverableStatus.aspx If you find errors in the

6、 present document, please send your comment to one of the following services: https:/portal.etsi.org/People/CommiteeSupportStaff.aspx Copyright Notification No part may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm except as aut

7、horized by written permission of ETSI. The content of the PDF version shall not be modified without the written authorization of ETSI. The copyright and the foregoing restriction extend to reproduction in all media. ETSI 2018. All rights reserved. DECTTM, PLUGTESTSTM, UMTSTMand the ETSI logo are tra

8、demarks of ETSI registered for the benefit of its Members. 3GPPTM and LTE are trademarks of ETSI registered for the benefit of its Members and of the 3GPP Organizational Partners. oneM2M logo is protected for the benefit of its Members. GSM and the GSM logo are trademarks registered and owned by the

9、 GSM Association. ETSI ETSI TS 103 530-3 V1.1.1 (2018-02)3 Contents Intellectual Property Rights 4g3Foreword . 4g3Modal verbs terminology 4g31 Scope 5g32 References 5g32.1 Normative references . 5g32.2 Informative references 6g33 Definitions and abbreviations . 6g33.1 Definitions 6g33.2 Abbreviation

10、s . 6g34 Abstract Test Method (ATM) . 6g35 ATS conventions 7g35.1 Introduction 7g35.2 Testing conventions 7g35.2.1 Test cases Preamble and Postamble 7g35.3 Naming conventions . 7g35.3.1 General guidelines 7g35.3.2 Test case grouping 8g35.3.3 Test case identifiers 9g3Annex A (normative): NAS S1-MME P

11、artial PIXIT pro forma . 10g3A.1 The right to copy 10g3A.2 Identification summary. 10g3A.3 ATS summary 10g3A.4 Test laboratory 10g3A.5 Client identification 10g3A.6 SUT 11g3A.7 Protocol layer information 11g3A.7.1 Protocol identification 11g3A.8 PIXIT items 11g3A.8.1 Introduction 11g3A.8.2 Port and

12、Address items . 11g3A.8.3 LibCommon items 12g3A.8.4 LibNAS items . 12g3Annex B (normative): NAS S1-MME Abstract Test Suite (ATS) . 13g3B.1 The TTCN-3 Module 13g3History 14g3ETSI ETSI TS 103 530-3 V1.1.1 (2018-02)4 Intellectual Property Rights Essential patents IPRs essential or potentially essential

13、 to normative deliverables may have been declared to ETSI. The information pertaining to these essential IPRs, if any, is publicly available for ETSI members and non-members, and can be found in ETSI SR 000 314: “Intellectual Property Rights (IPRs); Essential, or potentially Essential, IPRs notified

14、 to ETSI in respect of ETSI standards“, which is available from the ETSI Secretariat. Latest updates are available on the ETSI Web server (https:/ipr.etsi.org/). Pursuant to the ETSI IPR Policy, no investigation, including IPR searches, has been carried out by ETSI. No guarantee can be given as to t

15、he existence of other IPRs not referenced in ETSI SR 000 314 (or the updates on the ETSI Web server) which are, or may be, or may become, essential to the present document. Trademarks The present document may include trademarks and/or tradenames which are asserted and/or registered by their owners.

16、ETSI claims no ownership of these except for any which are indicated as being the property of ETSI, and conveys no right to use or reproduce any trademark and/or tradename. Mention of those trademarks in the present document does not constitute an endorsement by ETSI of products, services or organiz

17、ations associated with those trademarks. Foreword This Technical Specification (TS) has been produced by ETSI Technical Committee Core Network and Interoperability Testing (INT). The present document is part 3 of a multi-part deliverable. Full details of the entire series can be found in part 1 2. M

18、odal verbs terminology In the present document “shall“, “shall not“, “should“, “should not“, “may“, “need not“, “will“, “will not“, “can“ and “cannot“ are to be interpreted as described in clause 3.2 of the ETSI Drafting Rules (Verbal forms for the expression of provisions). “must“ and “must not“ ar

19、e NOT allowed in ETSI deliverables except when used in direct citation. ETSI ETSI TS 103 530-3 V1.1.1 (2018-02)5 1 Scope The present document specifies the Abstract Test Suite (ATS) and partial Protocol Implementation eXtra Information for Testing (PIXIT) pro forma for the test specification for the

20、 S1AP protocol on the S1-MME interface as specified in ETSI TS 124 301 1 in compliance with the relevant requirements and in accordance with the relevant guidance given in ISO/IEC 9646-7 7 and ETSI ETS 300 406 8. The test notation used in the ATS is TTCN-3 (see ETSI ES 201 873-1 9). The following te

21、st specification and design considerations can be found in the body of the present document: the overall test suite structure; the testing architecture; the test methods and port definitions; the test configurations; TTCN styles and conventions; the partial PIXIT pro forma; the modules containing th

22、e TTCN-3 ATS. Annex A provides the Partial Implementation Extra Information for Testing (PIXIT) pro forma. Annex B provides the Abstract Test Suite (ATS) part of the ATS. 2 References 2.1 Normative references References are either specific (identified by date of publication and/or edition number or

23、version number) or non-specific. For specific references, only the cited version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. Referenced documents which are not found to be publicly available in the expected location might be

24、 found at https:/docbox.etsi.org/Reference/. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced documents are necessary for the application of the present document. 1 ETSI TS 124 301 (V13.

25、8.0): “Universal Mobile Telecommunications System (UMTS); LTE; Non-Access-Stratum (NAS) protocol for Evolved Packet System (EPS); Stage 3 (3GPP TS 24.301 version 13.8.0 Release 13)“. 2 ETSI TS 103 497-1 (V1.1.1): “Core Network and Interoperability Testing (INT); S1AP Conformance Testing for the S1-M

26、ME interface; (3GPPTM Release 13); Part 1: Protocol Implementation Conformance Statement (PICS)“. 3 ETSI TS 103 497-3: “Core Network and Interoperability Testing (INT); S1AP Conformance Testing for the S1-MME interface; (3GPPTM Release 13); Part 3: Abstract Test Suite (ATS) and partial Protocol Impl

27、ementation eXtra Information for Testing (PIXIT) pro forma specification“. 4 ETSI TS 103 530-2: “Core Network and Interoperability Testing (INT); NAS Conformance Testing for the S1-MME interface; (3GPP Release 13); Part 2: Test Suite Structure (TSS) and Test Purposes (TP)“. ETSI ETSI TS 103 530-3 V1

28、.1.1 (2018-02)6 5 ISO/IEC 9646-1: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 1: General concepts“. 6 ISO/IEC 9646-6: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 6: Pro

29、tocol profile test specification“. 7 ISO/IEC 9646-7: “Information technology - Open Systems Interconnection - Conformance testing methodology and framework - Part 7: Implementation Conformance Statements“. 8 ETSI ETS 300 406: “Methods for testing and Specification (MTS); Protocol and profile conform

30、ance testing specifications; Standardization methodology“. 9 ETSI ES 201 873-1: “Methods for Testing and Specification (MTS); The Testing and Test Control Notation version 3; Part 1: TTCN-3 Core Language“. 10 ETSI TS 103 530-1: “Core Network and Interoperability Testing (INT); NAS Conformance Testin

31、g for the S1-MME interface; (3GPPTM Release 13); Part 1: Protocol Implementation Conformance Statement (PICS)“. 2.2 Informative references References are either specific (identified by date of publication and/or edition number or version number) or non-specific. For specific references, only the cit

32、ed version applies. For non-specific references, the latest version of the referenced document (including any amendments) applies. NOTE: While any hyperlinks included in this clause were valid at the time of publication, ETSI cannot guarantee their long term validity. The following referenced docume

33、nts are not necessary for the application of the present document but they assist the user with regard to a particular subject area. Not applicable. 3 Definitions and abbreviations 3.1 Definitions For the purposes of the present document, the terms and definitions given in ISO/IEC 9646-7 7 and ETSI

34、TS 124 301 1 apply. 3.2 Abbreviations For the purposes of the present document, the abbreviations given in ISO/IEC 9646-1 5, ISO/IEC 9646-6 6, ISO/IEC 9646-7 7 and ETSI TS 124 301 1 apply. 4 Abstract Test Method (ATM) The ATM used to test the NAS protocol within the S1AP protocol on the S1-MME inter

35、face at the MME side is described in ETSI TS 103 530-2 4, clause 4. ETSI ETSI TS 103 530-3 V1.1.1 (2018-02)7 5 ATS conventions 5.1 Introduction The ATS conventions are intended to give a better understanding of the ATS but they also describe the conventions made for the development of the ATS. These

36、 conventions shall be considered during any later maintenance or further development of the ATS. The ATS conventions contain two clauses, the testing conventions and the naming conventions. The naming conventions describe the structure of the naming of all ATS elements. To define the ATS, the guidel

37、ines of the document ETSI ETS 300 406 8 were considered. 5.2 Testing conventions 5.2.1 Test cases Preamble and Postamble As described in the test method clause the test tool shall behave as an eNB that tunnels NAS messages from UEs over eNB encapsulated to the MME. The test case preambles and postam

38、bles are named as follows: IUT is a S1AP with NAS/MME (example TC_NAS_MME_MGR_01) f_S1AP_init 5.3 Naming conventions 5.3.1 General guidelines The naming conventions are based on the following underlying principles: In most cases, identifiers should be prefixed with a short alphabetic string (specifi

39、ed in table 1) indicating the type of TTCN-3 element it represents. Suffixes should not be used except in those specific cases identified in table 2. Prefixes and suffixes should be separated from the body of the identifier with an underscore (“_“): EXAMPLE 1: c_sixteen, t_wait_max. Only module name

40、s, data type names and module parameters should begin with an upper-case letter. All other names (i.e. the part of the identifier following the prefix) should begin with a lower-case letter. The start of second and subsequent words in an identifier should be indicated by capitalizing the first chara

41、cter. Underscores should not be used for this purpose. EXAMPLE 2: f_authenticateUser. Table 1 specifies the naming guidelines for each element of the TTCN-3 language indicating the recommended prefix, suffixes (if any) and capitalization. ETSI ETSI TS 103 530-3 V1.1.1 (2018-02)8 Table 1: TTCN-3 nami

42、ng convention Language element Naming convention Prefix Suffix Example Notes Module Use upper-case initial letter NAS_ none NAS_Steps TSS grouping Use all upper-case letters none none TP_NAS_MGR_TC Message template Use lower-case initial letter m_ none m_authApplicationId Message template with wildc

43、ard or matching expression Use lower-case initial letters mw_ none mw_subscriptionId Port instance Use upper-case initial letter none none S1APPort Constant Use lower-case initial letter c_ none c_maxRetransmission Function Use lower-case initial letter f_ none f_authentication() Altstep Use lower-c

44、ase initial letter a_ none a_receive() Variable Use lower-case initial letter v_ none v_basicIdPICS values Use all upper case letters PICS_ none PICS_NAS_MME_ Note PIXIT values Use all upper case letters PX_ none PX_NAS_ NoteParameterization Use lower-case initial letter p_ none p_macId Enumerated V

45、alue Use lower-case initial letter e_ none e_synCpk NOTE: In this case it is acceptable to use underscore as a word delimiter. 5.3.2 Test case grouping The ATS structure is based on the Test Purposes for the NAS protocol on the S1-MME interface as defined in ETSI TS 103 530-2 4. ETSI ETSI TS 103 530

46、-3 V1.1.1 (2018-02)9 5.3.3 Test case identifiers The test cases have been divided according to the functionalities into several groups. The test case names are built up according to the following scheme. Table 2: TC identifier naming convention scheme Identifier: _ = Test Case: fixed to “TC“ Interfa

47、ce: NAS = type of IUT: MME = group EPS Mobility Management MGR GUTI relocation procedure MAU Authentication procedure MSM Security mode control procedure MID Identification procedure MEI EMM information procedure MAT Attach procedure MDE Detach procedure MTA Tracking area updating procedure (S1 mode

48、 only) MSR Service request procedure MPA Paging procedure MTR Transport of NAS messages procedure MGT Generic transport of NAS messages procedure MES EMM Status EPS Session Management SDF Default EPS bearer context activation procedure SDE Dedicated EPS bearer context activation procedure SCM EPS be

49、arer context modification procedure SCD EPS bearer context deactivation procedure SPC UE requested PDN connectivity procedure SPD UE requested PDN disconnect procedure SRA UE requested bearer resource allocation procedure SRM UE requested bearer resource modification procedure SEI ESM information request procedure SNO Notification procedure SRR Remote UE Report procedure STU Transport of user data via the control plane procedure = sequential number (01 to 99) NOTE: This naming scheme results in

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1