ETSI TS 103 909-2012 Power Line Telecommunications (PLT) Narrow band transceivers in the range 9 kHz to 500 kHz Power Line Performance Test Method Guide (V1 1 1 Includes Diskette)《.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

BS 4656-36-1987 Accuracy of machine tools and methods of test - Specification for plano-milling machines portal type《机床精度及试验方法 第36部分 龙门铣床规范》.pdf

BS 4656-38-1995 Accuracy of machine tools and methods of test - Specification for surface finish of test pieces《机床精度和试验方法 第38部分 试样表面精整规范》.pdf

BS 4656-4-1971 Specification for the accuracy of machine tools and methods of test - Milling machines bed type horizontal or vertical spindle《机床精度及试验方法 第4部分 卧式或立式铣床》.pdf

BS 4656-5-1979 Specification for the accuracy of machine tools and methods of tests - Milling machines knee and column type horizontal spindle universal《机床精度及试验方法 第5部分 卧式万能升降台铣床》.pdf

BS 4656-9-1974 Accuracy of machine tools and methods of test - External cylindrical grinding machines with reciprocating table《机床精度及试验方法 第9部分 往复台式外圆磨床》.pdf

BS 466-1984 Specification for power driven overhead travelling cranes semi-goliath and goliath cranes for general use《一般用途的动力驱动高架移动式起重机、中型移动式起重机和重型移动式起重机规范》.pdf

BS 4660-2000 Thermoplastics ancillary fittings of nominal sizes 110 and 160 for below ground gravity drainage and sewerage《地下重力排水和污水工程用公称尺寸为110和160mm的热塑塑料辅助配件》.pdf

BS 4672-1-1971 Guide to hazards in the transport and storage of packages - Climatic hazards《包装件运输和储存危害指南 第1部分 气候性危害》.pdf

BS 4672-2-1971 Guide to hazards in the transport and storage of packages - Climatic hazards (maps and diagrams)《包装件运输和储存危害指南 第2部分 气候性危害(地图与图表)》.pdf